Deebot T8+ “please check the driving wheels” issue. Video for ecovacs support.
Пікірлер: 65
@jameswebster25823 ай бұрын
For those still having this problem in 2024. Remove the 8x screws on the bottom plate to reveal a whole lot more dust underneath . Gave that a quick dust and within a minute the wheel which wasnt rotating as smooth was as good as gold. Hope this helps
@beslyvarghese960227 күн бұрын
I'm worried about doing it myself - how easy/hard is the whole process? 🙈
@jameswebster258227 күн бұрын
@@beslyvarghese9602 it's just using a screw driver. Can't really stuff it up
@heidistengel19989 ай бұрын
Fixed !!! Read a few comments about the length of the side brushes, we did replace ours recently. I trimmed them down a little 1/8 to 1/4 of and inch and it solved the problem (same problem as the video).
@ForgivenReverend Жыл бұрын
I have this issue with my T5. I can feel a difference in resistance on my robot. I also believe we can see in the video there is an increased resistance or possibly to say a decrease rate of spin due to resistance of maybe hair or dust. I am not sure how to get at the gears or insides as mine is pretty sealed up. Probably to prevent hair and dust to get into said area. I bet it requires some disassembly.
@jonathanhench97262 жыл бұрын
Did you get this issue resolved? I assume that the drive wheel had to be replaced? Any info would help. Thanks
@melissapicken9537 Жыл бұрын
We have the same issue I got that replacement warranty luckily
@adamskiba2 жыл бұрын
I have the same problem now. Did you get any help from the company?
@TheWeightliftingTriathlete2 жыл бұрын
I'm having this same issue with our robot vacuum. It's brand new and going over a relatively clean flooring with no obstacles, yet very few minutes it stops due to this error. Think I'll have to send it back
@danieldaccache3152 жыл бұрын
I have the same issue, has anyone found a solution?
@craigpearson1031 Жыл бұрын
Mine just did it now so I dropped on the ground from around an inch off the floor seems to have fixed the problem
@DJ-wi9yk7 ай бұрын
So what is the problem? Mine does that, but I don't get an error. It just keeps going like it's been possessed by Pazuzu.
@Rcq892 жыл бұрын
I have the same problem! When I touch the wheels and play with them they seem fine (they don’t feel stuck in any way) but my Deebot stops and marks error (something is supposedly stuck in there). How did you solve it? Thank you.
@indah_melati2 жыл бұрын
Check trash trapped in driving wheel. Mine okay after cleaning 2 brush with so many hair trapped.
@chrisjohnson5832 жыл бұрын
Having the same issue with mine - feels like the one side motor is dead.
@krishantanwar9643 Жыл бұрын
I too have the same problem, driving wheel malfunction, apparently there is no hairs of anything around the wheels.
@user-tz1pr8kn6z Жыл бұрын
same problem. tried what others did here and it lasted 15 mins. need a better solution!
@sheltermutts41852 жыл бұрын
My experience is that the whisker brushes are too long and they catch under the driving wheels, especially on aftermarket parts. Cutting them way down so that they don’t catch under the wheels seems to solve my problem. Hope this helps
@katiegray0072 жыл бұрын
You are My HERO!! This was Exactly my problem; and a quick trim of the brushes fixed a problem that was driving me Bonkers! 😀
@falconbrook784 Жыл бұрын
wow, thank you, I will try this.
@noi747 Жыл бұрын
That solved my problem as wel.l thanks
@seckinabbas19711 ай бұрын
Is it really that simple? I am using original parts but still have the issue. I will try that, thanks
@sheltermutts418511 ай бұрын
@@seckinabbas197 I know right! If the whiskers are long enough to go under the wheels, they will. And it causes this problem. Glad these folks aren’t designing airliners.
@Pierport2 жыл бұрын
Same thing here. Sometimes will fix itself, this time it’s being more stubborn. Please update when you hear back.
@indah_melati2 жыл бұрын
Check trash trapped in driving wheel. Mine okay after cleaning 2 brush with so many hair trapped.
@swirlyseal64575 ай бұрын
@@indah_melati how do you clean the wheels?
@Rickedydoo3 ай бұрын
@@indah_melatihow do I get to the trash trap for the driving wheel? I unscrew the 8 screws and can’t find the trash trap
@indah_melati3 ай бұрын
Sorry i cant help. I just used pinset and found tissue was trapped. I think its not ur case. sorry
@angelan.89132 ай бұрын
same thing happening with mine after working perfectly for 2 years... cleaned the wheels and there seems to be nothing there.. not sure what to do :(
@McLaw184811 күн бұрын
Exactly the same here with my 360 S10 beloved robot. 😢
@greenyblueeyes19 ай бұрын
Had the same problem. Check the wheel drive revolution sensor wires. One had broken on my L wheel drive, after I had replaced the R wheel drive with no change to Deebot's erratic motion and 'check wheel drive' error. Resoldered broken wire and this fixed my problem. Hope this helps someone.
@minalaurindo77132 ай бұрын
Weird, I think there is no problem 😮
@haka87022 ай бұрын
I've the "Omni" I think it's T9+. Same issue. This looks like a deliberate firmware "bug" to me. If you switch it off and on, it will work fine again. If you do not do a hard power off you will have a permanent "block" on one motor. It simulates a bad wheel, but it's pure software that blocks it.
@chuaxanthe2 жыл бұрын
I have the same issue. How to solve this?
@indah_melati2 жыл бұрын
Check trash trapped in driving wheel.
@curusca43382 жыл бұрын
Same here. It's about 1 year old, no pets, just dust cleaning... how to fix it!?
@indah_melati2 жыл бұрын
Check trash trapped in driving wheel. Mine okay after cleaning 2 brush with so many hair trapped.
@EatMoreWorms2 жыл бұрын
Got the exact same issue. Did you get a response yet?
@indah_melati2 жыл бұрын
Check trash trapped in driving wheel.
@myronbrown44906 ай бұрын
Try Turn off and turn back on it will Fix the wheels
@leftywhat Жыл бұрын
Ours is doing the same, 14 months since purchase :/
@OfficialRonEdwards2 жыл бұрын
Same issue with mine, anyone have a solution?
@indah_melati2 жыл бұрын
Check trash trapped in driving wheel.
@indah_melati2 жыл бұрын
Check trash trapped in driving wheel.
@Schaaamy082 жыл бұрын
I also have this issue. Anyone find a fix yet?
@Schaaamy082 жыл бұрын
Should also add that I took off the side brushes and ran it to see if that was what was causing the error. It's still happening.
@indah_melati2 жыл бұрын
Check trash trapped in driving wheel. Mine okay after cleaning 2 brush with so many hair trapped.
@McLaw184811 күн бұрын
@@indah_melatino dust or hairs inside, but still the problem
@shannyngarside102810 ай бұрын
There was a baby wipe lodged under one of my wheels. I had to pry it out with a screwdriver 😂😂😂 hope that helps someone
@Jajadinkdong Жыл бұрын
Just happened to me. I take off the back cover. It runs smooth again. Give it a try.
@jfcjr458410 ай бұрын
What do you mean specifically?
@maweaver682 жыл бұрын
I had to smash the drive wheels to bottom out with the palm of my hand and now it is driving correctly.
@joshuac5443 Жыл бұрын
What?
@coopersbarbecue Жыл бұрын
That worked while my hand was on it. Now I'm intrigued. When I let my hand off it reverted back. Any idea what the issue may be?
@BackDaws2 жыл бұрын
mines just starting to do this, it's a loose sensor cog
@markbehnke5243 Жыл бұрын
Can you please elaborate? Thanks
@juliepandurov360 Жыл бұрын
What and where is the sensor cog ?
@shawnodonahue1680 Жыл бұрын
Where did you get this info and how did you fix it?