Fajnie było by wiedzieć jakie są wskazania na ekranie . Więc rozumiem za cewka 13 jest najbardziej optymalną ? 9.5 dużo traci z głębokości? Jak jest z separacja na 13?
@roverjohn7 ай бұрын
I have a GM 5 that I like a lot. Does the 7 have that much better performance and do these coils work on the 5?
@nufrii7 ай бұрын
7G coils 9.5'' , 13x11'' and 18'' works only with Golden Mask 7 and Golden Mask ONE15 Black. GM7 have very good performance compared to GM5
@Susan_HunTer7 ай бұрын
Finally the target is ferrous or good target? It s 1 test of separation or deep? Probably good target and the 9.5 sign ferrous
@nufrii7 ай бұрын
@@Susan_HunTer Read the video description !!! 1. Deep test - Fighter S 7G 9.5'' vs 13x11'' vs 18'' 2. Cooper plate Ø80mm buried at 65 cm .
@user-tj1iu4ey2s7 ай бұрын
Здорово! Подскажите, пожалуйста, у меня GM6. В чем принципиальная разница от 7 модели?
@nufrii7 ай бұрын
Катушка и 4 частоты . Новая катушка 7G добавляет глубину + 10%.
@novicazmijastankovic73887 ай бұрын
Hello. At what frequency and what are the settings for that test?
@nufrii7 ай бұрын
At the beginning of the video it is written with yellow letters (0:08 - 0.11sec.)
@MrCofresipirate3 ай бұрын
14
@bartoszdudek47447 ай бұрын
Can you make similar presentation, but with a small target, for example arrowhead?
@nufrii7 ай бұрын
For a small targets small 9.5'' coil is better ... it's like going for fish, small hook for small fish, big hook for big fish
@bartoszdudek47447 ай бұрын
@@nufrii I know, depending on separation and resolution, but I'm really interested how deep can they see those small targets in a clean, not trashy area
@nufrii7 ай бұрын
@@bartoszdudek4744 for trashy area need 9.5'' or 5x7'' and frequency 24 or 44kHz . For extreme conditions, you don't have to worry about depth. The advantage of GM detectors is that they have good recovery speed and great depth at the same time, due to 60% analog technology even in GM7
@bartoszdudek47447 ай бұрын
@@nufrii I get it, know about it, got GM4 and Tangra with 3 coils, and other analogs. But still, I wonder what's the difference for that kind of objects with GM7, at a clear site. Sometimes the conditions change suddenly even at one field, some parts are trashy, and some are not. Many people often go for short huntings just with one coil. That's why I wonder what's the difference on depth, for those cases. Would be best od you make similar short movie for small target to show us :)
@jaroslavstedry42277 ай бұрын
Hi, will there be videos with other frequencies as well? Thank you...
@nufrii7 ай бұрын
Large coils work well at low frequencies for big targets .18'' Fighter S works well at 15kHz and lower, eg 4kHz , 13x11 works well at frequencies 13-22kHz (for medium targets) , 9.5'' works well at higher frequencies 18kHz to 40kHz. For example, a multi-frequency detector emits frequencies of 4-40kHz, but you have one size coil connected to detector (for example, 11''), this means that an 11'' coil is effective only at frequencies of 10-18kHz, the other frequencies are not emitted effectively. I have in mind that in order for a multi-frequency detector to be fully effective, a multi-size coil must be attached to it...but such does not exist. If you do a test with the EQ900 at multifrequency with 11'' coil and after at 15kHz you will not see a difference.
@muslumcearabesk5 ай бұрын
Are the settings in this video factory settings?🤔 (It works very stable)
@nufrii5 ай бұрын
Yes, detector in this video works on factory settings . Stability depends on soil type and on presence of iron trash
@muslumcearabesk5 ай бұрын
@@nufrii Are factory settings the best and most stable settings?
@muslumcearabesk5 ай бұрын
@@nufrii I want it to work quietly and stably.
@nufrii5 ай бұрын
Yes, but If need more stable detector need to turn ''ON'' GB STAB
@ryckasu23005 ай бұрын
hello. is 13-11 coil sensitive to tiny hammered coins?
@nufrii5 ай бұрын
No, please read HF1000 User manual - www.goldenmaskdetectors.com/detector-details-id-83-en.htm