Defeat in the restoration of the SHARP Boombox GF-9696
Рет қаралды 261,022
Күн бұрынThis video is not my successful restoration video, but my defeat of the restoration of the SHARP GF-9696.
As usual, I started the restoration by opening the outer casing, and I found out and was shocked that it was a hundred of the cockroaches' haunted house. They were everywhere. Between the capacitors, inside of the cassette deck, next to the volume pod, etc...
After cleaning the whole body, I started working with cassette deck. The motor wasn't spinning at all. So I opened it and found out it caught fire. I did not know what ignited fire. The brushes are broken, and commuter was also broken. I replaced the broken parts from the other SHARP boombox. I wanted to replace the whole motor, but this GF-9696 has speed adjustment feature and the motor needs 3 pins instead of 2 or 4 pins. So I needed to use the circuit board on this motor even it has burnt mark.
After the parts replacement the motor started to spin, however, I found out another problem.
It did not stop spinning unless the AC power cord is removed. Even though the main power switch and cassette deck's power switch were both off, it kept spinning.
I decided to check the cassette deck's power switch which was the leaf switch. I checked it with a multimeter, then I removed it to see the inside condition. But it turned out that this switch was not broken.
Before I put the leaf switch back to the original place, I tested the motor again. This time, the power switch for the cassette deck is removed, so there was no way that motor would be able to spin. However, it spun.
After more than 20 hours of work, I decided to call it off. Not only the technical issues, but my skin started showing allergy reaction. Probably from the filthy contents inside.
The GF-9696 will sleep inside of the box until another GF-9696 comes to me. Hope someday I will be able to finish the unfinished job. Enjoy!
-----------------
Donation welcome!
If you like my videos and would like to donate to me for my future video making work, I appreciate your kindness. Here are coin wallets and Paypal address. Thank you in advance.
www.paypal.me/teddyhashee358
BTC (Bitcoin):
1DQJChuaZi2bHamigZWVvKwHShsTJW9uQk
BCH (Bitcoin Cash):
qqe43k5hdvuzstz8zxmamn0qn6x44y4wzqj240h99n
ETH (Ether):
0xaC7578787cA1964cf45b314b2ac9eB2cF876FB05
LTC (Litecoin):
LNJf56cM4pRgH4G47EePCUGMQWAJLV4zyi
@s.g.3042 4 жыл бұрын
Typewriter, boomboxes - this man lives in paradise.
@mrfredchew 6 жыл бұрын
I always admire your patience and thoroughness when working on vintage electronics.
@teddyhashee 6 жыл бұрын
Hi, Fred. Thank you for your compliment on my work.
@rickyconciertos8888 5 жыл бұрын
you are the best Teddy never change, thank you very much for teaching us how to restore these great sound machines from time to time
@teddyhashee 5 жыл бұрын
Thank you for your compliment on my work!
@user-vm7wb4pt1n 2 жыл бұрын
Всё чётко, и ясно👍😁
@ametaljag 6 жыл бұрын
A video with great drama I must say. I think it is very good of you to show that not all projects lead to glory, even with your experience and skills. Quite impressed by the micro surgery on the motor by the way.
@teddyhashee 6 жыл бұрын
Hi, Albert. Thank you for your compliment on my work. Yes, as you said that I do have many unsuccessful restoration jobs, and I can say I have learned many thing from them.
@gourishankarsubramanian9677 5 жыл бұрын
Though you cannot complete the work ..but still i'll appreciate your restoring the motor and the way you cleaned the equipment worth appreciating. Don't lose heart man ...still you can achieve. Great job!
@teddyhashee 5 жыл бұрын
Thank you for your compliment and encouragement. I am flattered!
@ssgeek4515 5 жыл бұрын
I have a gf9500 with similar issues,don't give up. There Much better than the new versions you can buy that are made to look like the originals.
@teddyhashee 5 жыл бұрын
Thank you for your comment and encouragement!
@ioneldinu6153 4 жыл бұрын
Respect for your job from Romania!
@teddyhashee 4 жыл бұрын
Thank you for your compliments on my work!
@RegiPavan 6 жыл бұрын
Sorry that you could not complete the job... I have a GF 9494 that needs a whole check-up, you gave me inspiration to do that.... Please keep sending us videos like this...
@teddyhashee 6 жыл бұрын
Thank you Regi for your comment. I will keep uploading videos.
@electronicshelpcare 5 жыл бұрын
Excellent idea and video.
@teddyhashee 5 жыл бұрын
Thank you!
@gbrl_ht01 6 жыл бұрын
R.I.P.😢 But i think you should try again with the circuit part. 'Cause as always you are the best, c'mon man!
@teddyhashee 6 жыл бұрын
Thank you for your encouragement. I am going to work with it again soon.
@hellraiserball 6 жыл бұрын
great video as usual you show all in details,i hope you can finish that restoration one day.i have a sharp gf 8585 and i know that one and have the best bass ever!
@teddyhashee 6 жыл бұрын
Thank you for your encouragement, and compliment. As you said, I am hoping in the near future I will be able to finish the job and hear the great sound from this old dude.
@willmarsanchez186 6 жыл бұрын
eres un maestro te felicito aprende uno se necesita paciencia
@teddyhashee 6 жыл бұрын
Thank you for your compliment on my work!
@carloscolon4295 6 жыл бұрын
Ted..ur work always amaze me..sometimes there are things that are really hard to fix..maybe you could come with some ideals later on..u still are a beast,that surgical job on the motor was a tough one..sad to see a beaultiful boombox go to waste.i know later on u think of something..anyway good job.
@teddyhashee 6 жыл бұрын
Hi, Carlos. Thank you for your compliment, as you said I would like to restore this one in the future. Until such time this one will sleep inside of the box dreaming she plays music again.
@lxPhilxl 6 жыл бұрын
Never feel defeated, come back to it at a later date.
@teddyhashee 6 жыл бұрын
Thank you for encouraging me. I will keep in mind your word and hopefully will start working with this one again in near future.
@atelierfat 5 жыл бұрын
Good job mate, I have one of these and the amplifier mother board died, however i had another unit that i used to replace it, a huge soldering job and it works...
@teddyhashee 5 жыл бұрын
Wow, you did a great job! Keep up!
@halfniak 5 жыл бұрын
Well done for trying and thanks for the video
@teddyhashee 5 жыл бұрын
Thank you for your compliment!
@ivancoronelmoran9667 3 жыл бұрын
Excellent Video
@filip8297 5 жыл бұрын
If the electric motor drive on this Sharp GF8989 has the same voltage, then there is no need to dismantle it. You only need to check the voltage he has. You can do this easily with the aid of a multimeter. If the voltage is the same, then it's enough to wrap the wires and transfer it to another electro-mechanism. The cylinder number is not as important as the correct voltage is. I hope it helps. You need to see where the switch is that has a constant electrical switch. Have you tried to check the power switch that is at the play button you press when you want to play the tape? Maybe a contact is created that allows the electric energy to be transmitted to the electric motor.
@teddyhashee 5 жыл бұрын
Hi, Daniel. Thank you for the great input. Yes I checked most of the parts and switch, non of gave me any ideas what is wrong. I think somewhere in the motor control units had malfunction for powering up the motor.
@edstar83 5 жыл бұрын
Never give up never surrender! Subscribed.
@teddyhashee 5 жыл бұрын
Thank you for your compliment on my work!
@rahimkvayath 5 жыл бұрын
Never feel defeated, with all the best wishes, from india
@teddyhashee 5 жыл бұрын
Thank you for your encouragement!
@jobmanuelmamanichura6905 5 жыл бұрын
TEDDY HASHEE TIENES LA MANO DE DIOS MIS RESPETOS ERES EL MEJOR TECNICO QUE HEY VISTO HASTA LA FECHA, SOY DE PERU OK GRACIAS
@teddyhashee 5 жыл бұрын
Thank you for your compliment on my work!
@carloszambrano3227 5 жыл бұрын
Excelente Teddy, i like radio..!
@teddyhashee 5 жыл бұрын
Thank you!
@vntgelvr13 6 жыл бұрын
You're still a Bada$$ Tech!
@teddyhashee 6 жыл бұрын
HI, David. Thank you for your compliment!
@MarcelVanHoekElvis 5 жыл бұрын
Well done great Job!
@teddyhashee 5 жыл бұрын
Thank you!
@riverhuntingdon6659 6 жыл бұрын
You can't save them all Teddy. There could be another little switch inside the cassette deck itself. But if it was sent to me to restore, I'd throw it out, as the cockroaches were everywhere ...Good job on the motor mind. I've never seen one where the commutator has failed like that, and suspect it ran far too fast when the regulator went pop :-)
@teddyhashee 6 жыл бұрын
Hi, River. Thank you for the comment. Like you said the commutator was completely broken off. I can not imagine how hot was it to ignite the fire inside of the motor. Anyway, because of the hundreds of cockroaches, I needed to encourage and force myself to keep restoring this boombox until I find the skin allergy reaction on my hand. LOL
@MehmetAyaz-yo4hd 3 ай бұрын
Ellerine sağlık usta
@gregoryacevedo2940 6 жыл бұрын
Hi Ted. Did you try putting on all the belts to see if the motor shuts off. Usually the reason the motor is stuck on is when you press play the motor will turn on and engage to the play and raises the play and record head to operating position. If there are no belt present the motor continues to be on. But this does not happen on all radios. This is most common with full logic or soft touch controlled decks. That is usually why you see the motor running even if the radio is off. Try turning the main flywheel a bit so the play and record will drop into the park position and the motor might turn off. Hope this helps. I know you’ll bring her back to life. Cheers Gregory
@teddyhashee 6 жыл бұрын
Hi, Gregory. Thank you for the comment and advise. As you said, that soft touch cassette deck has the system that all the time motor is spinning. Like JVC M-90. But even such boombox, when the main power is off, the power to the motor will be off and motor will stop spinning. This boombox, it is not the type for soft touch or full logic. It will engage the motor power only when the cassette deck buttons are pressed down. Besides that, this boombox's motor keep spinning even the main power button is off. The motor has 3 wires which I did not check each of them, but I guess they are hot, ground and common. And in some reason the hot is bypassing the cassette switch (ON/OFF for the motor) causing motor keep spinning.After spending some time with other boomboxes, I may get back to it and try to restore again. Thank you!
@sklaboratory3983 4 жыл бұрын
Excellent!
@teddyhashee 4 жыл бұрын
Thank you for your compliment on my work!
@codebeat4192 5 жыл бұрын
Love the craftsmanship you showed us (especially on the motor), like the music, however it was easier to replace the motor with a brand new one (or brushless one) with some adjustable dc/dc converter attached to it? Replacing old parts with old parts is just a matter of time to fail again. The constant running motor must be a simple problem but I guess you must know a little more about electronics. You don't understand everything you do, am I right? It is no blame however could be handy to solve all kind of problems, this puppy is repairable.
@teddyhashee 5 жыл бұрын
Hi, Code. Thank you for your comment and advice. I replaced inside of the motor parts since I wanted to know the reason why the motor kept spinning. So the replacing inside parts was one of the way to determine the cause it was the motor or not. Anyway, as you said I do encounter many things which I do not understand at all. But it is a kind of mystery solving journey and I enjoyed every step of I took regardless I was able to solve it or not. Thank you again!
@tomil2002 5 жыл бұрын
Perfektní práce
@teddyhashee 5 жыл бұрын
Thank you!
@samfunk3029 6 жыл бұрын
Teddy tes le King de la réparation excellent
@teddyhashee 6 жыл бұрын
Hi, Sam. Thank you for your compliment. I am flattered.
@hamedbahrami1192 5 жыл бұрын
👍👌
@teddyhashee 5 жыл бұрын
Thank you !
@MiguelTorres-ci7rh 5 жыл бұрын
Lástima esas Radiograbadoras sonaban de maravilla. Saludos desde Ciudad de México
@teddyhashee 5 жыл бұрын
Thank you for your compliment.
@rajenojar3206 5 жыл бұрын
omg, had one was using this with externel speakers 2 8"an tweeters had a blast back then
@teddyhashee 5 жыл бұрын
Thank you for your comment and great info!
@eltruheyo 3 жыл бұрын
Hi Teddy, were you able to clean the inside of the boombox and rid it of the roaches? The reason I ask is because I now own this box. Thanks
@Xantylon74 Жыл бұрын
Did you buy it from him? Didn't he tell you about the roaches?
@eltruheyo Жыл бұрын
@@Xantylon74 I did buy it from him but it was roach free. Teddy was able to get rid of them through the cleaning he did.
@Xantylon74 Жыл бұрын
@@eltruheyo Great! Does it work now?
@eltruheyo Жыл бұрын
@@Xantylon74 Oh yes.
@RoughJustice2k18 5 жыл бұрын
No defeat here Teddy - just a project that "tried" to frustrate you in the beginning - I've tackled hundreds of products like this in my lifetime that, along with the original faults, were full of roaches (dead and alive), spiders (dead and alive), money (mostly coins), cake, half-eaten vegemite sandwiches, a novelty ring (those kiddie ones you get out of a 10-cent machine), hair clips, and so on. VCR's, tape decks, tuners, amplifiers, CRT TV's, even turntables all had their share of 'foreign objects' which often took several hours to clean up and/or remove before any repairs or restoration could be undertaken. At least the boombox wasn't full of live redback/black widow spiders! That would really bite.
@teddyhashee 5 жыл бұрын
Wow and I understood how you felt when you open up the body of the items. I also remember that when I was starting to restore the turntable, inside there were unbelievably many of the left over from the past. It was kind of fun for me to look at the each of them imagining how the old life was back in there. Thank you again for your comment.
@21whitman 6 жыл бұрын
I was getting frustrated for you. I would step away and come back to it after a little time to come up with ideas. The last straw would be find a really physically beat up 9292 or 9494 that has a good radio and power source and take the insides of that and substitute the parts you need into the 9696. I know you will win eventually.
@teddyhashee 6 жыл бұрын
Hi, Buzby. Thank you for your encouragement and great idea for the substitute parts. I hope I will be able to finish this unfinished job in the near future.
@WARDANT1 5 жыл бұрын
Similar issue when I replaced a motor with erratic speed on my Sony. Bought a new old stock motor with identical part number. New one runs continuously as soon as I power on. I've given up for the bit. It seems something in the circuitry is telling it to run continuously, but why? I haven't touched anything on any of the circuit boards.
@teddyhashee 5 жыл бұрын
Was it step motor that has 4 wires? I am not sure why the symptom on your motor was happened, but if you can not find any clue, you can do the same thing as i did by adding another leaf switch to control the motor run. Thank you for the comment.
@eltruheyo 4 жыл бұрын
Hi Teddy, is this the same 9696 you eventually restored with Bluetooth for Pedro?
@teddyhashee 4 жыл бұрын
Yes!
@alejandomedina 6 жыл бұрын
hi tedd i really wanne to see that box working :( but . but hey you did a very goood job . ill be waiting we you came back to that box to see the restoration :)
@teddyhashee 6 жыл бұрын
Thank you for your encouragement. I may try again to restore this monster!
@jacquelinegajardo9306 4 жыл бұрын
Felicitaciones por tu trabajo es muy profesional....ojala en Chile tuviesemos Tecnicos como tu...solo tenemos timadores y con muy poco sentido profesional...con suerte le pasarian una brocha para limpiarla...reitero mis felicitaciones...
@teddyhashee 4 жыл бұрын
Thank you for your compliment on my work!
@jacquelinegajardo9306 4 жыл бұрын
@@teddyhashee you're welcome, a question, do you sell any that have been restored?thanks from Santiago de Chile.
@teddyhashee 4 жыл бұрын
@@jacquelinegajardo9306 Long time before, I sold many boomboxes online. Right now I have no time to restore my boombox to sell them. I currently am working with my clients boomboxes.
@jacquelinegajardo9306 4 жыл бұрын
@@teddyhashee Ok, I understand, but I ask you to please, if you later sell again online or have a boombox for sale. Please let me know. Thank you. Have a great year 2020.
@whozaskin3639 5 жыл бұрын
Was a rewind or fast forward button making errant contact?
@teddyhashee 5 жыл бұрын
No, every contact of the leaf switch were OK.
@iulianmandu7327 3 жыл бұрын
Show must go on ....))
@GraemeRobinson 6 жыл бұрын
Some projects are like that - if its unhealthy that's the kicker for me!
@teddyhashee 6 жыл бұрын
You are right. From the dust to the cockroaches, mice, there are tons of health hazard thing in the restoration work.
@zordanxxx 5 жыл бұрын
I used to fix computers for other people but had to stop, most of the problems were lack of maintenance (mainly clean up), the nail in the coffin was the bed bugs infestation, put the pc in 3 garbage bags and returned it "as is", I am not a technician, neither a pest control expert. I would charge more for clean ups than fixer upper.
@teddyhashee 5 жыл бұрын
Thank you for the information. I totally understand how you felt when you find the super dirty one!
@azertydu80g.r.p.s 6 жыл бұрын
You make a good job . Where can i buy the product for cleaning the plastics parts ? For my Cibi radio . thank you
@teddyhashee 6 жыл бұрын
It is called "Soft99 plastic cleaner" I bought it from Japan. Here is a link I found from online global.rakuten.com/en/store/at-life/item/4975759205050/ Hope you will be able to get it.
@Aoa2005 5 жыл бұрын
Super video 👍👍👍👍👍
@teddyhashee 5 жыл бұрын
Thank you!
@dedey_15 5 жыл бұрын
Using battery t1000 to motor,amazing reaction.
@teddyhashee 5 жыл бұрын
Thank you for the comment!
@mustafakaynar5033 3 жыл бұрын
Tebrikler
@RamblersMedia 4 жыл бұрын
I'm doing mine up at the moment and when I play the tape I get a monotone noise that plays over the music. Any ideas?
@teddyhashee 4 жыл бұрын
You want to demagnetize the head, and test it again.
@florinlepadatu5648 3 ай бұрын
Do you have more info about this motor bfv2r01? is it dual speed? volts?
@ahmedakm6031 5 жыл бұрын
عاشت ايديك يا عسل
@teddyhashee 5 жыл бұрын
Thank you for your compliment!
@juanpabloarena2724 5 жыл бұрын
Stewart Coppelan sound!
@teddyhashee 5 жыл бұрын
Thank you for your comment!
@PheakTraASMR9999 3 жыл бұрын
good
@TheJaHa5 6 жыл бұрын
Aww c'mon! You can't reach so far in the repairs of this unit, and give up so easily man! Already washed the housing of the unit and everything, and all because of a pesky motor, you condemn this project? Just take a rest, do some more projects, and whenever you're restless, come back to it. I'm sure all you needed was just a breather, time to cool your brains off a bit. Check the wiring, make sure there isn't a bridging off somewhere caused by a cockroach or something... Thanks for the video, and looking forward to part 2 of this video.
@teddyhashee 6 жыл бұрын
Hi, James. As you said, I am resting from Sharp and doing other restoration, but always that GF-9696 comes out in my head with new ideas. Soon or later, I need to face it again. Next time I am hoping to put it together and hear the great sound from it. Thanks again!
@tinujatinpatel 5 жыл бұрын
Wow what an awesome video. I had to watch it twice as I couldn't pay attention enough due to my add. However why not just put a manual turn off switch and see if the rest of the system works?
@teddyhashee 5 жыл бұрын
Thank you patel. As you said, in the next video, I added another switch to power on and off the motor. kzfaq.info/get/bejne/b8mWlM2QppzVgI0.html
@damusicianstrikesback5337 6 жыл бұрын
Check if there’s something in the motor circuitry that’s bypassing the switch.
@teddyhashee 6 жыл бұрын
Thank you for your advise. As you said, I need to follow the current from the power source to the motor, and need to find the secret way how they bypassing the switch. Thank you.
@aoilkgfd 4 жыл бұрын
モーター直せるって凄いな
@teddyhashee 4 жыл бұрын
Thank you for your compliment.
@user-td1pt4bd9c 6 жыл бұрын
Ted, why didn't you change the whole engine?
@teddyhashee 6 жыл бұрын
The original motor had 3 wires from power and speed adjustment units and other 3 pins for cap. Total of 6 pin mysterious motor. I could not find exact same type of the motor so I tried to test original circuit on the motor even it has burnt mark. By the way, I strongly suspected that there was a problem for powering motor system. The current comes to motor without any power switches were on, and I also suspected this malfunction caused motor to ignite the fire. But Actually I do not know the true reason for this thing right now.
@user-td1pt4bd9c 6 жыл бұрын
Teddy Hashee 👍
@MrBoogaloo86 5 жыл бұрын
Where are you located at? I have this same boom and need it repaired.
@teddyhashee 5 жыл бұрын
I'm in NJ 07605 USA, contact me at teddy.hashee@gmail.com if you need more info. Thank you!
@matt6787 7 ай бұрын
Hello, do you have any spares for this GF9696 ? or donor parts ? Thank you
@ErikPAPATIE 5 жыл бұрын
Are you win for restore this awesome vintage boombox and me too im found à vintage boom box last year and im found manyting inside and im restored
@teddyhashee 5 жыл бұрын
I did win the restoration of this 9696. I have a video about it, so check it out. You did a great job to complete the restoration of your boombox! Great !
@rigomortisfxstudios 5 жыл бұрын
i have a jmc m70 want to bring it back to life ? and make it a blue tooth ? how much would you charge ?
@teddyhashee 5 жыл бұрын
from $150 to$650 depends on the size,condition, and other factor. Detail contact me at teddy.hashee@gmail.com Thank you.
@scaleop4 6 жыл бұрын
on some decks the motor never stops spinning its the same on my yamaha kx-650 when the unit is on the motor allways spins.
@teddyhashee 6 жыл бұрын
Thank you for the comment. Yes, I know. And this one is even the main power is off, still motor was sniping. Means without removing the batteries or AC cord, the motor kept sniping 24 hours 7 days.
@scaleop4 6 жыл бұрын
not to sure then. you'll have to another look another time i'm sure you'll fix it.
@teddyhashee 6 жыл бұрын
Thank you, and I will.
@Maul9999 5 жыл бұрын
This is used for the flywheel on the tape cassette right?
@teddyhashee 5 жыл бұрын
Yes, it has a flywheel.
@Maul9999 5 жыл бұрын
@@teddyhashee There are many different reason why it won't stopped. It is normally like the flywheel in car are always running. Switch can have been crossed to each other. (I have a Pioneer DT-540 with rotary issue. I found it has been crossed to each other until I clean it and it gold'd) Wire melted to each other. Or defected transistor that drive the motor. It can be happened because the housing is not back together. Ever more reason that can have been causing this issue. So, I would suggested to check it out this link I found, it is on page 2. www.hifiengine.com/hfe_downloads/index.php?sharp/sharp_gf-9696_schematics.pdf HiFi Engine have more information on it.
@teddyhashee 5 жыл бұрын
Thank you for the great input. I already returned it to the original owner. But next time if I encounter the same issue, I will do as you said.
@Maul9999 5 жыл бұрын
@@teddyhashee Aw shunk! But that was really cool. Nobody's making that wonderful boombox anymore. I remember in 1994, they were better than current years.
@nathegotule284 2 жыл бұрын
That's,,gangster bruzz Da,, baddest fixer Inda world,,... 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥😁😁😁😁😁😁😁😁😁😁🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺👍👍👍👍👍👍👍👍👍👍 Peace n kindness down under,, Sydney Australia👏✌🍺🚬😁
@nathegotule4666 3 жыл бұрын
Da,,ghetto blaster king... Fixxxer,, 1,,very smart Gangster,,,,, ☺☺☺☺☺☺☺☺☺☺☺✋✋✋✋✋✋✋✋✋✋🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺👍👍👍👍👍👍👍👍👍☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺☺ Peace n kindness down under Sydney australia
@jaylao4565 2 жыл бұрын
Do you have one like this one for know?
@alirezafarahani4852 5 жыл бұрын
very god i love you
@teddyhashee 5 жыл бұрын
Thank you for your compliment.
@nathenzuber4021 Жыл бұрын
Have you been able to run across a "parts" machine for this project?
@k333ization 6 жыл бұрын
I saw that this radio has a micro switch that is difficult to replace. I know why I have a car radio with SHARP RG-5800H cassette player that has the same micro switch to operate the cassette player motor, and it's broken.
@teddyhashee 6 жыл бұрын
HI, Alessandro. Thank you for the great info. It may help me when I re-start restoring this one. Thank you.
@FollowerofGod 11 ай бұрын
do you sell it?
@bambangsutrisno7785 6 жыл бұрын
Kasih penjelasan dong,,,,,,kerusakan dan klebihan tip radio jadulnya supaya aku mengerti.karna aku juga pencinta elektronik jadul.biyar bisa buwat koleksi.dan jangan lupa terjemahan bahasa indonesian.trimakasih
@teddyhashee 6 жыл бұрын
Thank you for your compliment on my work.
@daredeviltm159 4 жыл бұрын
How is sound performance?
@teddyhashee 4 жыл бұрын
The sharp has a great sound especially bass, and I like it.
@vansonphan7883 3 жыл бұрын
Cho mình hỏi chiếc radio đó giá bao nhiêu ạ
@rosagarciasyjuancarlos7731 Жыл бұрын
donde puedo restaurar el mio
@SlotXTv 5 жыл бұрын
Hello sir teddy good day sir Where' s your location sir? I just want my boombox to be restore sir its a crown csc 970 sir deck is dead already and the fm radio still works but it received a few channels and some of led lights are not working already, how much it will coz sir and im living in the Philippines sir thank you
@teddyhashee 5 жыл бұрын
In in NJ USA. Contact me through email. teddy.hashee@gmail.com regarding detail restoration info. Thank you.
@blue21624 5 жыл бұрын
Cuanto por un radio de esos?
@teddyhashee 5 жыл бұрын
On ebay, starting from around $200 to $2k depending on the condition. Hope you will be able to find yours.
@MrTommyboy357 5 жыл бұрын
If you had an ohm meter you could have looked for the short that was feeding juice to the motor, that's probably why the motor burnt out in the first place
@teddyhashee 5 жыл бұрын
Thank you for the great advise. I had no idea where to start. But your suggestion gave me the hope to find the real problem in this machine. I will research and learn how to use ohm meter to find out the problem. Thank you again.
@MrTommyboy357 5 жыл бұрын
yeah searching for a short is a real headache, good luck! seeing what else you did, i'm sure you'll get it!
@teddyhashee 5 жыл бұрын
Thank you!
@avkarlos 5 жыл бұрын
In my knolege the motor spin around all the time??
@teddyhashee 5 жыл бұрын
Yes, even the main power is off, the motor won't stop spinning unless remove the AC cord from the body.
@avkarlos 5 жыл бұрын
@@teddyhashee that is try to say when did. You change the control tape from radio is stated the motor work wait for press play. Other wise if change for radio is only the way on in off ?
@teddyhashee 5 жыл бұрын
This cassette deck, whenever you plug the AC cord or put the batteries in, the motor start spins without pressing main power switch, nor pressing any button on the cassette. Only way you can stop spinning the motor is remove AC cord or batteries.
@avkarlos 5 жыл бұрын
@@teddyhashee i see now but is nice you fix i see other parts congrats
@fransicorivas3141 6 жыл бұрын
Hey teddy I know you'll make another video with victory written all over it every great hitter strikes out just get back to the plate for home run in the clutch lol. I know you can fix it. Why didn't you swap the whole motor ? Can't wait till your next at bat
@teddyhashee 6 жыл бұрын
Thank you for your encouragement. The original motor has 3 wires and other 3 pins for the cap. So total of 6 pin strange motor. I could not find same exact motor, so I decided to use original circuit board on the motor even it had burnt mark on it. By the way, this non-stop motor symptom, I suspected it was not from motor malfunction, it was from the malfunction of main circuit board or main power and speed adjustment unit for the motor. Thank you again for your support.
@Laxmansingh-ki4kn 2 ай бұрын
अछा
@MrGaming17 6 жыл бұрын
Bah il y aura peut-être une deuxième partie parce que tu as pas fini ta restauration
@teddyhashee 6 жыл бұрын
Thank you for your comment. As you said, in the future I maybe able to finish this restoration.
@mauriciosanchez902 5 жыл бұрын
Wow 😱 muchos componentes todo es muy complejo dentro 👍 los speakers de ahora son basura😏
@teddyhashee 5 жыл бұрын
Yes they were well build and great sound.Thank you for your comment.
@julioovando6951 5 жыл бұрын
Ahora todo es.desechable solo para un rato saludos totales ...!!!
@rajudivyakanchera3379 5 жыл бұрын
GREAT JAPANESE BRANDS
@teddyhashee 5 жыл бұрын
thank you for the comment.
@PheakTraASMR9999 3 жыл бұрын
$?
@Williamadlam1 5 жыл бұрын
why did sharp stopped making ghetto blasters? William c adlam in leek Staffordshire in UK
@teddyhashee 5 жыл бұрын
The first ever mono boombox was created from AIWA in the end of 60's. It was super simple cassette deck with 3-band radio. Then 70's Sony made it stereo. Then the quality and size of the boombox rapidly evolved and end up to the "The Searcher W" from Sharp. People wanted to put huge boombox on their shoulder and walk with loud music. 80's Sanyo made a very stylish mini boombox, then Sony made again the Boombox with CD player. Around this time all makers changed their design from just huge bombox to high quality and reasonable size with super power sound. That's what I heard about the history of the Boombox evolution.
@telkentexas4053 5 жыл бұрын
Because now we have mobile phones and Bluetooth speakers.
@juhahannukka1633 5 жыл бұрын
i remember that. apld is new. and no money. in finland. i read - magazine test reports.
@teddyhashee 5 жыл бұрын
It reminds you an old days memory!! Thank you for the comment.
@kenmorales2598 2 жыл бұрын
Would u do my m9930 like this
@martyjewell5683 5 жыл бұрын
Filled with roaches, where did you find this, NYC?????
@teddyhashee 5 жыл бұрын
I am not sure where it came from , but when I was in NYC, yep there were tons of roaches.
@martyjewell5683 5 жыл бұрын
@@teddyhashee- Teddy, ya gotta love NYC and all that goes with it. Fuhgeddaboudit!
@user-zz9ij9ox8y 5 жыл бұрын
👌🚜💨👍👍💰💰💰
@teddyhashee 5 жыл бұрын
Thank you for the comment!
@alexandertorres5809 5 жыл бұрын
Do You have some for sale?
@teddyhashee 5 жыл бұрын
I have small boomboxes that are waiting me to restore and mod. I do not have big one like this type.
@alexandertorres5809 5 жыл бұрын
@@teddyhashee like small stereo boombox?
@teddyhashee 5 жыл бұрын
Yes. I may take a pictures of them and put then on instagram to show you.
@allenschmitz9644 5 жыл бұрын
way over my head..that thing is a jungle.
@teddyhashee 5 жыл бұрын
Indeed!
@earlycuyler8719 5 жыл бұрын
Jack it up and drive a new one under it! Lol
@teddyhashee 5 жыл бұрын
Thanks for the comment.
@rathikindiveraiah7281 3 жыл бұрын
My SHARP GF 9494X Power Problem Casset bad Problem Repalce India Tamelinadu
@enriqueescobedo15 5 жыл бұрын
That's a real ghetto radio!
@teddyhashee 5 жыл бұрын
Indeed!
@Rzukjlm 5 жыл бұрын
Such a shame Can't b dun
@CestUnAquoiboniste 5 жыл бұрын
My SHARP GF-9494 has similar problem, radio ok, cassette bad. :-(
@teddyhashee 5 жыл бұрын
I understand how you feel about the cassette deck problem.
@sadkiahmed6946 3 жыл бұрын
كيف يمكن الحصول او شراء هذه لأجهزة الرائعة جدا بالله عليكم
Infinity Circus
Рет қаралды 3,5 МЛН
GrandMasterPlayer
Рет қаралды 109 М.
Dan Cummings - Bombers Garage
Рет қаралды 4,2 МЛН
Baumgartner Restoration
Рет қаралды 3,2 МЛН
Maryana Lokel
Рет қаралды 1,3 МЛН