Defective 180sx - How to Make it (pretty much) Roadworthy
Рет қаралды 57,524
4 жыл бұрынGian's 180sx has been collecting dust for over a year now, so finally we give it the TLC it deserves.
Perks & Extras on our Patreon:
/ bennyscustomworks
BCW Parts + Merchandise:
www.bennyscustomworks.com
Socials:
/ bennyscustomworks
/ bennyscustomworks
Benny's Custom Works brings you everything automotive!
Weekly Episodes right here on KZfaq, as well as the shop with new & used performance parts for most Japanese makes and models.
Benny makes this stuff look like a walk in the park. Please consider the risk factors and talk to a qualified mechanic, as well as a psychologist, if you’re thinking of attempting anything you’ve seen on the show.
Take into consideration your safety, the safety of others, as well as your vehicle’s best interests- warranty, etc.
Unless you’re trained & qualified to do so, we don’t recommend modifying your vehicle in any way. Stickers don’t add HP unless installed correctly.
@wasabicars 4 жыл бұрын
Watching a pro at work isn't boring. Enjoyed
@BennysCustomWorks 4 жыл бұрын
WasabiCars thanks for watching mate.
@nismofreak33 4 жыл бұрын
I really enjoy doing this kind of, basic maintenance/improvement work to modified cars, even more than doing the mods themselves lol.
@notold37 4 жыл бұрын
Sometimes watching the basics is a great learning tool, I know its been a while since I've been able to work on my own car 👍🏼👍🏼👍🏼👍🏼🇦🇺🇦🇺🇦🇺🇦🇺
@GENE_THE_NEMES1S 4 жыл бұрын
Ha ha "Infinity Boosts" love it
@JaySmith-cd1ln 4 жыл бұрын
Scrolling through youtube, crap, crap, more crap, Benny and a 180sx *CLICK* 👍
@StepHop5 4 жыл бұрын
Love the in depth guide! They are really good cars to drive when taken care of. Looking forward to more vids on the 180 especially ones on making it reliable
@user-kz2op2ge6u 4 жыл бұрын
like wise mate keep it up the nice work we watching and learning from you Benny's Custom Works is the future .......lets go
@WILLYMANFRAK 4 жыл бұрын
Enjoyed a lot! You just got a new subscriber mate
@imouse3246 4 жыл бұрын
"... some things just gotta be done." Well said!
@installwebercarburetorsona6159 4 жыл бұрын
Thanks Benny
@rossgarykelly84 4 жыл бұрын
Good professional tips
@CrisFlow 4 жыл бұрын
hey bud , I just started making videos on my 240sx come check it out . thanks man!
@StreetDreamzTT 4 жыл бұрын
Good stuff. I like these vids.
@CrisFlow 4 жыл бұрын
what up man ! I just stared a doing car vlogs on my channel come check it out ! I really would appreciate it!
@regulatormachine2788 4 жыл бұрын
i just love the s13
@STREETCARCULTURE 4 жыл бұрын
😂 good content my man 👍🏽
@CrisFlow 4 жыл бұрын
how's it gong bud ? I just stared making vlogs on my channel come check it out thanks!
@milesbetts4125 4 жыл бұрын
Tay tay 😍
@xozindustries7451 4 жыл бұрын
Lots of good tips, I always wonder why people don’t use hard lines for the waste gates
@BennysCustomWorks 4 жыл бұрын
XOZ Industries I have seen them but if you do it that way your solenoid needs to be mounted on the engine . I prefer braided AN teflon line like Raceworks etc, still flexible but much more durable than silicone or rubber.
@lordmmx1303 4 жыл бұрын
last time i was this early, benny was still working on daihatsu mira with mcm guys.
@matthewrobinson9293 4 жыл бұрын
Stolen then parked up for 12mths. Gian needs to give the 180sx some love i think
@samueldekoning8047 4 жыл бұрын
Don’t worry about powder coating, wrinkle red rattle can job will do the trick 😉
@jordanneumann9467 4 жыл бұрын
Love me a Silver type x got one my self but I got a s13 front
@Driftit 4 жыл бұрын
It could be a 95 Type X. But it's not what most people think of a Type X (late 96 to late 98). Red top SR is the give away. Looks like just a "Type X" bumper.
@jordanneumann9467 4 жыл бұрын
Yes but that’s not the factory red
@Rhys1600 4 жыл бұрын
What didn’t they think of on the AU falcon? They are incredible things
@user-kz2op2ge6u 4 жыл бұрын
useless toys , S-Chassis
@matutolaYT 4 жыл бұрын
so, the 8:54 washer material, there are two main reasons why there are aluminum, fiber or or copper composite washers, they are equality important and then there are many more. Expansion rate of the material: you do not want to have big expansion differences between the washer and the material it is sealing. Reactants: so you don't want for the fluid (oil, engine coolant, brake fluid, other fluids) to start a chemical reaction with the washer. if you want to get even further in this you can easy find the history why Toyota made the "SUPER LONG LIFE COOLANT"
@carlwicks2088 4 жыл бұрын
Ace
@declanfallah8112 4 жыл бұрын
Hoping you can pump out some more videos because of lockdown 🤙🏽
@poochey1 4 жыл бұрын
What did you put on the battery before welding? the thing that looked like short jumper leads?
@BennysCustomWorks 4 жыл бұрын
poochey1 it’s anti surge protector , it’s quicker than disconnecting the battery and means you don’t need to reset the clock/ radio.
@Don0van5100 4 жыл бұрын
Hey, do you have a link for the box of copper crush washers. I had a search on spares box but nada
@Don0van5100 4 жыл бұрын
Giles Manyweathers wow $59, didn’t Benny say $12
@biohazzardnoz 4 жыл бұрын
What are you spraying the welds with to keep the from rusting? Both inside and outside of the car.
@BennysCustomWorks 4 жыл бұрын
TheTaXUS just good quality black paint. We really don’t have rust issues in Australia
@lukecollins7965 4 жыл бұрын
Wish i had a 180!!! If the rocker gasket is leaking don't change the plugs until you change the gasket, most likely oil is leaking into the plug holes.
@BennysCustomWorks 4 жыл бұрын
Luke Collins plug holes were dry as :D
@johntreloar8203 4 жыл бұрын
Quick question, how often should you change plugs on a turbo motor?
@BennysCustomWorks 4 жыл бұрын
john Treloar if they’re iridium 100k, standard style , 20k
@mranderson911 4 жыл бұрын
whats that box you put on the battery when you were welding?
@BennysCustomWorks 4 жыл бұрын
deane anderson it stops voltage spikes instead of disconnecting the battery
@adamrandell7946 4 жыл бұрын
Was that bolts missing off the sub-frame? I know that's normal for a crusty S chassis though lol.
@BennysCustomWorks 4 жыл бұрын
Adam Randell just exhaust hanger bolt.
@LoudGuitar14 4 жыл бұрын
It is always surprising to see what other countries require for registration. I do kinda wish that we has any kinda of safety inspection required. Many of the cars I see regularly in the States are literal death traps from neglect and plain ignorance
@banjopete 4 жыл бұрын
Mike Louder , none at all? I never knew that, bloody hell.
@Scrubworks 4 жыл бұрын
@@banjopete Depends what US state you're in. Some have full safety inspections, some just inspect emissions, some have nothing.
@tomwagemans1872 4 жыл бұрын
Here in Belgium we have to go to the inspection every year. If the car fails, you have 14 days to fix it otherwise you can't drive anymore.
@theimprovementsguy8871 4 жыл бұрын
Be very careful what you wish for
@LoudGuitar14 4 жыл бұрын
@@banjopete Most states it is literally no safety inspection. Because it is a state by state issue most only care about emissions and only a select few will do any safety inspection. The last emissions check I did was a joke too. Plugged into OBD, no codes and done en.wikipedia.org/wiki/Vehicle_inspection_in_the_United_States
@dylans7317 4 жыл бұрын
If you own a 180 it is automatically defective
@akira5982 4 жыл бұрын
It is if u drive at the wrong times & that's for most jdm sports cars, I drive a wide body 180 with stupid dish & straight pipes everyday & I've never been pulled over in the 5 + years I've owned it "touch wood", I stick too the only drive it in peak hour traffic rule 😉 I'd rather those hours than a defect
@mansalans 4 жыл бұрын
Yo where do you get your washer kits from? I've never changed my washers before on any of my cars and should probably do that...
@BennysCustomWorks 4 жыл бұрын
mans alans the coper washer kits are from my local industrial suppliers , ebay should have similar kits.
@mansalans 4 жыл бұрын
@@BennysCustomWorks cheers mate.
@darylnicklen3685 4 жыл бұрын
People have to remember for most mechanics life is at least 70% boring stuff, 20% fun stuff and at least 10% Bullshit cause by owners.
@get_chopped 4 жыл бұрын
Song ID?
@scottinWV 4 жыл бұрын
I don't know if I've ever had a sump plug that had a gasket like that. But, I'm in the USA and ya gotta crank them down to make sure they don't leak.
@zappy7393 4 жыл бұрын
When welding on a car with live power, should you remove the battery power and ECU to prevent damage?
@SomeMorganSomewhere 4 жыл бұрын
I believe he hooked a surge suppressor across the battery (you can see it in the sequence after the ground clamp on the rear strut tower).
@adamrandell7946 4 жыл бұрын
You can use an isolator, pretty sure Benny was using one.
@BennysCustomWorks 4 жыл бұрын
Yes if not using a surge protector I’d highly recommend disconnecting the battery
@montistiltskin7594 4 жыл бұрын
Is this Tay-Tay? I just recognize the blue coil packs is all
@joealex65 4 жыл бұрын
Late answer i know, but Tay Tay was parted out, this car got some of the parts like that and the coilovers
@jamesclay152 4 жыл бұрын
😍😍😍😍😍
@roachdetective 4 жыл бұрын
nice profile picture nerd
@jamesclay152 4 жыл бұрын
Jake Petersen mate, get out of here. Get back in the queue
@astroboy308 4 жыл бұрын
Does anyone know what wheels those are on the 180?
@BennysCustomWorks 4 жыл бұрын
astroboy308 regamasters , 17x9 + 22 or there abouts
@AND5TAR 4 жыл бұрын
Literally watched this the other day and then forgot to disconnect the battery when changing the oil filter on my 180, what fuse have i blown and where is it? not a whole lot of clear information on the internet from my search
@411nightnheaven 4 жыл бұрын
Isint Australia on lockdown right now?
@BennysCustomWorks 4 жыл бұрын
4/11nightnheaven businesses who cannot work from home are still allowed to operate, these videos are also 6-8 weeks old, we’ve been filming 3-4 episodes per week for a while incase we do have total lock down.
@letpigsfly 4 жыл бұрын
What plug number and gap did you put on the spark plugs? Cheers.
@BennysCustomWorks 4 жыл бұрын
Ant S BKR6E .8mm gap, could also use BKR7E if it was on E85 or BCPR7ES if you want more tension on the ignition coil spring, basically the same plug but 3mm longer
@slicker9996 4 жыл бұрын
Benny's Custom Works Does the effect of having more coil spring tension increase its efficacy in its ignition or make it more reliable? I've been having weird blowout issues on fullboost (15psi) on my 200kw 180sx and couldn't fix until i ran the smallest gap i could on the bkr7e (around 0.020?) but on cold idles i would run into misfires. Do you think it could be related to the spark plug gaps themselves or should i be looking into the actual coils(splitfires), given i have no history of its health and whatnot.
@BennysCustomWorks 4 жыл бұрын
RoGG W sounds like either the coils are lazy or you have a power or grounding issue.. if it’s an S13 setup check how many volts you have at the coil connector, also check all your grounds etc and battery terminals. Can you check battery voltage during ignition break down?
@slicker9996 4 жыл бұрын
Benny's Custom Works Voltage on the coils seemed fine last time i checked. Not too sure how to check voltage while I'm under full load though i will double check the grounds etc. Worded my question wrong i actually get engine stalling issues when cold (revs like to drop till it almost stalls) which I'm assuming is from the very aggressive gap i have just to temporarily fix it, i find it odd that if a coil or two is failing i would get misfires or stutters in general but under full load feels like I'm hitting a rev/boost limiter.
@shakostyle_jp7746 4 жыл бұрын
@@slicker9996 funnily enough your problem sounds exactly like the problem im having, im going to go through all the wiring because the only thing it could be When i got a tune everything ran perfect but when they pulled it back into the shop after testing it started stalling randomly cold and hot. For some reason when the thermo fans turned on it would idle without an issue but as soon as you give it a little throttle it would start doing the same thing again.
@Bmckimm 4 жыл бұрын
I saw this car on my way home from work the other night, I was in the Silver Golf GTI wassup Gian lol
@ArtVandelayOfficial 4 жыл бұрын
That dumpipe is asking for loose nuts and gasket leaks
@darthvader8433 4 жыл бұрын
Can understand ppl throwing LS engines in these. But getting a 5.7-6.3 litre engineered in Australia to replace a 1.8 litre 4cyl sounds unlikely...
@zappy7393 4 жыл бұрын
Most come with the SR20 in Oz.
@EarrGasmm 4 жыл бұрын
You can get pretty much anything on the road if you have it tested and engineered.
@nicwilson89 4 жыл бұрын
@@zappy7393 That's kinda a shame. The CA sounds much better
@darthvader8433 4 жыл бұрын
@@zappy7393 But aren't they the 200SX with t h e 2 litre?
@semitones 4 жыл бұрын
......Cresta?
@BennysCustomWorks 4 жыл бұрын
Semitones more coming . Track is closed ( understandably ) so no racing :(
@semitones 4 жыл бұрын
@@BennysCustomWorksNo worries, was actually a tongue in cheek dig at the 5-0 attention the Cresta got last year.
@coolkidscarclub 4 жыл бұрын
Rocket cover
@fatdabistan1448 4 жыл бұрын
Listening to the car laws in AUS makes me sad for you... It appears they'd rather have compliant ants driving than free humans
@mostlypostie1 4 жыл бұрын
It's the money. The government are addicted to revenue raising.
@mj_aussie_coaster_travels8310 4 жыл бұрын
It’s really not that bad. Some other countries are ridiculously lenient. Somewhere in the middle ground (ie queeensland or New Zealand laws) is ideal imho.
@ryantilley-general.shenanigans 4 жыл бұрын
I'm not too fussed, I've always owned modified cars and never run into any issues, it means we have a culture of having well looked after and well cared for and presented cars. I think the positive spin off from that outweigh the negatives.
@callum4035 4 жыл бұрын
Subaru’s reliable 😂😂😂
@christastical 4 жыл бұрын
Where are you getting EUREKA ASSORTMENTS kits for $12 :|
@BennysCustomWorks 4 жыл бұрын
Chris Smith local industrial suppliers.
@Overture 4 жыл бұрын
@@BennysCustomWorks :0 We are getting ripped, our local charges 30....
@010aray 4 жыл бұрын
I do love how Alan and Benny jock Subaru, makes you think they were being paid. Funny that the most common broke ass car here on the side of the highway is: Subaru. Subaru small engines are the most poorly engineered and unreliable pieces of shit I've ever had the displeasure of servicing. Also, an EJ20 is better than a 2JZ said no one, ever.
@BennysCustomWorks 4 жыл бұрын
Werdna Dracip the ej207 specifically is a great engine, so many engineering changes over the standard ej20, but the ej25 on the other hand , now there’s an engineering compromise .
@mj_aussie_coaster_travels8310 4 жыл бұрын
Benny's Custom Works what models got the ej207?
@omr0138 4 жыл бұрын
Subaru and reliable do not belong in the same sentence. 😂😂
BalcevMMA_BOXING
Рет қаралды 13 МЛН
Repair Geek
Рет қаралды 1,3 МЛН
Честнов Анатолий
Рет қаралды 8 МЛН
Честнов Анатолий
Рет қаралды 8 МЛН