Minka Aire Artemis Ceiling Fan Installation

Рет қаралды 144,068

11 жыл бұрын

www.delmarfans.com/minka-aire-...
See how to install the distinct Minka Aire Artemis from Del Mar Fans & Lighting. The Minka Aire Artemis ceiling fan is UL approved for indoor locations, and is suitable for installation on standard ceilings or sloped ceilings with a pitch up to 29 degrees. The 58-inch blade model is appropriate for rooms ranging in size from 125 square feet to 250 square feet in size while the 62-inch model is appropriate for rooms ranging in size from 150 square feet to 300 square feet. The Artemis ceiling fan is ideal for bedrooms, family rooms, great rooms, and other large areas.
Del Mar Fans & Lighting is an online ceiling fan and light fixture distributor with 19 years of industry experience. We work with the most trusted and sought after brands like Minka Aire Ceiling Fans to provide affordable and lasting cooling and lighting solutions. We strive to provide quality products, outstanding customer services, unbeatable prices, and in-depth product knowledge. Visit us at www.delmarfans.com/
Subscribe to Del Mar Fans & Lighting's KZfaq channel for more home improvement and how to videos: kzfaq.info_c...
Connect with us through our other social media channels for news, sales and contests, and other ceiling fan and lighting resources:
Education Center (Blog): www.delmarfans.com/educate/
Facebook: / delmarfans
Pinterest: / delmarfans
Houzz: www.houzz.com/pro/delmarfans/
Instagram: / delmarfans
Twitter: / delmarfans

Пікірлер: 71

@lomkeps 2 жыл бұрын

*Love it! Keeps the room very **Fastly.Cool** . The manual states it comes with a year warranty and 5 year part replacement. The compressor makes the typical sound...small price to pay for AC.*

@jimvickers9828 3 жыл бұрын

What do I think? Fantastic video. The instructions that come with the fan aren't terribly useful, so I googled a youtube video and you came up. Boom Boom Boom installed. Great video. I think Minka Aire should just put a link to your video on page one of their instructions!

@georgeplotner3871 4 жыл бұрын

Overall very good. The presenter goes a little fast, but thorough and well done. Great job!

@randykalmeta4780 5 жыл бұрын

I just installed a Light Wave, which is similar to this. The video was helpful, but took a few shortcuts in prep, mounting, and programming explanations. It would be helpful to discuss the receiver mounting, transmitter programming, and use of remote.

@Delmarfans 5 жыл бұрын

Hi Randy, noted. Thanks for your feedback!

@arboulet8884 9 жыл бұрын

great video, but it doesn't show how you get the remote sensor in place.

@michael2005002 11 ай бұрын

mine was just delivered to me,this video was very helpful....here we go!

@nmjabour 2 жыл бұрын

How do you change the direction for this model?

@JDM98Ferio 6 ай бұрын

Great video simple and to the point

@michaelsheehan6874 6 жыл бұрын

Really helpful video! Thank you!

@tccco9738 3 жыл бұрын

Great video - well done and thank you

@charlemagne6424 5 жыл бұрын

My uncle Zack and Aunt Amanda have one of these in their house.

@patriciat5226 2 жыл бұрын

Would I be wrong to say that the halogen light is now a LED light 9 yrs after this youtube was posted?

@tomjohnson4861 7 жыл бұрын

Very clear explanation.

@kevinmoriarty2159 5 жыл бұрын

great instructional video

@amyfretz2644 Жыл бұрын

Very nice. Thank you so much!

@russbirzescu2579 4 жыл бұрын

Great fan , i want to change the bulb and it's impossible to take the glass off .

@daledolan-zalaznick844 4 жыл бұрын

Worked great! It definitely assumes some basic electrician skills and you need to pay attention! Super helpful though.

@boukaus 9 жыл бұрын

nice. for the remote control we had to put the sensor ir on the upper protection. loss of aesthetic. plastic would have allow to hide them inside? ortherwise as expected.

@jaydee9630 4 жыл бұрын

Where did you buy the dual wall control towards the end of your video? It is no where to be found on the Delmar fans website.

@johnradelat6743 3 жыл бұрын

Colby!!!!!! This is Johnny from Kendall! What are the chances that you’re installing a ceiling fan and the instructional video you choose is a buddy from high school!!!!

@HaloGTMaster94 2 ай бұрын

Nice 👍

@vv8074 Жыл бұрын

In the Instructions it says to tuck wires neatly in ceiling outlet box. In the video you have them outside. Is that normal? It makes sense because the receiver is in the way but I just haven't seen wires outside of an outlet box before.

@coedshowers Жыл бұрын

Hey I have a minka 96" it just clicks and does nothing, another guy on a forum said they have bad gears that kill the motor when you switch directions. Do you have a gear fix video?

@jasonsoffer5003 4 жыл бұрын

I have this and have 2 issues: 1. I think my receiver died as when I press a button on the remote, it turns solid green, but nothing happens. How do you replace the reciever? 2. I want to see if my bulb is blown, but cannot get the glass off. Is there a trick to it? Thanks

@wilcoxtactical3716 Жыл бұрын

Mine doesn't work from the wall switch and only operates from the remote. Did I screw up wire diagram?

@jeanp.saint-louis3130 3 ай бұрын

Is this fan can be installed in the sloped ceiling?

@michaellorenz3578 Жыл бұрын

Maybe I missed it but what does the red wire connect to or which wires

@yoshiosaito8619 2 жыл бұрын

Good video. But I need a little more detail since I have few experience. A little longer is better

@justinverga 8 жыл бұрын

can you demo how to change the frequency should you have two fans in rooms next to each other --many thanks

@Delmarfans 8 жыл бұрын

Hi Justin, thank you for the suggestion, will definitely keep that idea in mind for when we start producing videos again! -Alexa

@danielkinney6325 4 жыл бұрын

thats what I have. I did that so I could use the remotes.

@mannyortega771 3 жыл бұрын

My wall switch has 4 wires red, white, black and ground. I only use ground and black wires. Where should I connect the fan wire to the wall?? Thank you

@DavidPalmer707 2 жыл бұрын

Yes!! A reply to your Q would be so valuable right about now. Cannot figure this out. My new neighbors probably think I'm crazy given it's 4:11a.m. Otherwise, I'm getting curtains and returning this janky fan.

@kellyshinn2731 4 жыл бұрын

Went to replace bulb and now light and fan won't work. I have wall mounted switch. No remote.

@jblack6572 4 жыл бұрын

Is there a reverse switch actually on the fan? I would prefer not to use the Artemis wall switch, but can't seem to find how to reverse the blades without it

@galevincent2684 2 жыл бұрын

I believe it’s on top of the fan.

@GTking2288 Жыл бұрын

How to fix, if it don’t working?

@tonyvanchieri3756 8 жыл бұрын

Hello: You show the fan being installed on its own circuit on the breaker box. Is that necessary? Does the fan need to be on its own circuit, or can it share a breaker with other lights on the circuit?

@Delmarfans 8 жыл бұрын

***** Hello! Thanks for the question. Yes, it will be very helpful if you install your fan with it's own circuit breaker box. The reason for this is when dealing with fans with lights, there is a lot of interference when on a shared circuit breaker (light flickering, fan making noises in some cases, etc.). To avoid this, we recommend installing the fan on a separate circuit breaker so it runs smoothly without any interference for the lighting application of the fan as well. Hope this helps! -Alexa

@justice4all72 7 жыл бұрын

Can you install this fan without a wall switch and just use the remote?

@Delmarfans 7 жыл бұрын

Hi! Thanks for the question - yes, you should be able to just use the remote :)

@tiffanyhatch5668 7 жыл бұрын

I can't get the wall switch to operate the fan. Is it because we didn't leave the antenna out like you did?

@Delmarfans 7 жыл бұрын

Hi Tiffany! That's possible, I would check to see if the dip switch settings match on your fan receiver and wall control.

@illmatic33 7 жыл бұрын

I just installed mine but seem to have a problem. The remote will not turn the fan on, neither will the toggle switch (already on the wall from previous fan). I took the remote out and was able to turn on/off with the toggle switch. Do I have a bad remote or does the fan does not work with both remote and wall switch? If they are not compatible, how do I take out the toggle switch so I can use the remote? Toggle switch got black and white from from breaker and black, white and red connected. Currently the two whites are connected together (not connected to the switch), the two blacks are connected together and to the same screw on the switch and the red is on the other screw on the switch. At the fan connection, the white and red are bringing the current (white is neutral and red load).

@illmatic33 7 жыл бұрын

Problem solved! The silly remote was not programmed from factory. Had to play around with it some.

@michaelkraft5171 5 жыл бұрын

If I only have a remote and no wall switch where is the slide reverse switch on the motor housing?

@Delmarfans 5 жыл бұрын

Hi Michael, if you don't have the option on your remote, there may be a switch on the motor housing like you mentioned. If you can't find one, then your ceiling fan most likely does not have the reverse feature. Hope this helps!

@jerryweinkam4541 4 ай бұрын

Can’t get it to work. Wiring not explained well.

@ispoglini 9 жыл бұрын

Hi.i have this fan for over a year.it is perfect.but now there is a problem with the remote control.only the light button works.i cant change the speed.it only works from the wall button.

@Delmarfans 9 жыл бұрын

Stratos Skevakis Hello! Thanks for the question. I would recommend calling Minka Aire directly at 1-800-307-3267 and they would be happy to help you get your Artemis remote working again! Hope this helps. -Alexa

@ispoglini 9 жыл бұрын

A technician came and fixed it.the receiver was not working.he changed it with a new.it cost 40 euro.now everything perfect.

@davemajor3332 9 жыл бұрын

So both wires on the switch unite to go into the black wire from the wall? What do you do with the other wire coming out from the wall?

@Delmarfans 9 жыл бұрын

Hi Dave Major, after connecting the ground wire, one black wire will be connected to the "power in" wire from the wall and the second black wire will be connected to the "fan power" wire from the wall. Hope this helps! -Alexa

@davemajor3332 9 жыл бұрын

Del Mar Fans & Lighting Thanks... my wall switch actually had a black wire and a red wire, powering the original classic light switch. I put the black wire on the power line for the new Del Mar switch, and the red wire on the fan line for the new switch.

@oliverlou1345 5 жыл бұрын

what can go wrong if my fan works but the light doesn't? any trouble shooting videos?

@Delmarfans 5 жыл бұрын

Hi Oliver! You can visit our Education Center article Ceiling Fan Troubleshooting here: www.delmarfans.com/educate/basics/ceiling-fan-troubleshooting/

@ken93944 4 жыл бұрын

Went to replace bulb it blow know fan wont run I check all breakers and still won’t run?

@kellyshinn2731 4 жыл бұрын

Same thing just happened to me. I only have a wall switch. Light and fan won't work now. Did you ever figure it out?

@willgeorge8368 4 жыл бұрын

If putting three in one room how do you sync to all use the same remote. (all on the same switch). Thanks

@ReitersBlock Жыл бұрын

Make sure the receivers all have the same dip switch settings and that the settings match the dip switch settings in your remote (inside the battery compartment) It doesn't matter what the settings are as long as they all match.

@rowenaserbesa9152 10 жыл бұрын

Quiet. Moves air nicely. Works great outdoors. Looks good. One remote operates 2 fans together. They turn on and off at the same exact time. No wobble.

@rowenaserbesa9152 10 жыл бұрын

_Get it here!..._goo.gl/XvFrhz

@coolgarrett02productions42 8 жыл бұрын

How much does this cost?

@Delmarfans 8 жыл бұрын

+Coolgarrett02 Productions Hello! Please visit the Artemis collection page to see the range of costs of the Artemis www.delmarfans.com/minka-aire-ceiling-fans/artemis/ -Alexa