No video
DeLonghi Coffee Machine Transmission Repair - Step by Step | Delonghi Magnifica
Рет қаралды 60,895
4 жыл бұрынIn this video you can see how to remove and repair the DeLonghi transmission.
With restorations and repairs of the old devices, I would like to make my contribution to environmental protection.
M Y T I P - B O X
_________________
www.buymeacoffee.com/myworks ☕
www.paypal.me/ytmyworks
Affiliate links:
Bezahlter Link:
U S E D P A R T S
_________________
Spindelmutter: amzn.to/2KxFrsq
OKS 470/471 Fett: amzn.to/2YjmBO3
M5 Sicherungsmuttern: amzn.to/3cTL0gP
M Y W O R K
______________
00:04 testing
00:12 remove transmission
01:05 disassembling
02:27 remove the spindle
03:36 washing the parts
04:08 replace the spindle nut
04:31 reassembling
05:25 greasing the parts
05:43 installing the transmission
05:58 final testing
#DeLonghiMagnifica #Repair #Restoration
@paul914 7 ай бұрын
From an engineer that has to be up there with an informative doc. No irritating look at me presenters voice just the straight facts Thanks!
@BarryElwyn123 3 жыл бұрын
Neat idea with the spanner. Excellent tutorial. Clear videoing. Professional.
@eugenuku 2 жыл бұрын
Great videos man. Thanks for sharing. It really did save time and troubles for me. Keep up the good work! Be blessed!!!
@sousouye Жыл бұрын
Thank you so much for the videos and all the advices !!
@atnstn 4 жыл бұрын
Magnificent! Thanks man!
@aljung 4 жыл бұрын
What a brilliant video! :)
@magdylast9408 3 жыл бұрын
Great video
@aminammar4260 3 жыл бұрын
Many thanks 🥰🙏
@ilnurmustafin1015 2 жыл бұрын
Good job!
@falkens08 Жыл бұрын
Thanks for this excellent, very informative and funny presented video. Very well done, I like enjoyed it.
@marcel2101 3 жыл бұрын
Vielen Dank! Sehr hilfreich. / TYVM! Very helpful.
@manubut3012 2 жыл бұрын
Muchas gracias
@silver152 3 жыл бұрын
very nice 👍
@vwcrosspolo 4 жыл бұрын
Great videos! Thank you so much for helping. I have a problem with my ECAM 22 110, the infuser gets stuck in the high position, someone told me it could be the microswitch but i cannot locate it.
@yt.myworks 4 жыл бұрын
I'm glad I could help
@yt.myworks 3 жыл бұрын
@@sampople Sorry, I don't know if it helps but you have to make sure that all components like microswitches and Reed PBC are checked.
@pohaa 6 ай бұрын
Nice little "subscribe" plug. Ha! Another great video. Thanks you.
@alpine161 4 жыл бұрын
Pure Poesie dein Video
@yt.myworks 4 жыл бұрын
Freut mich sehr, habe viel Arbeit reingesteck.
@tespanton3886 8 ай бұрын
Probably the most detailed video ever regarding this topic, hats off!!! Regarding the grease, since I could not find OKS locally, I sourced these three food grade types instead: Nevastane HD2T (Kinetic viscosity at 40C=130mm2/s), Lubcon Turmosynthgrease ALN 1002 (Kinetic viscosity at 40C=100mm2/s) and a thicker one from Kluber - Klubersynth UH1 14-222 (Kinetic viscosity at 40C=260mm2/s). Now my question might sound stupid but please hear me out: since the first two greases contain aluminium oxide thickeners, would they chemically react with the spindle nut and ultimately damage it over time? (can't tell if it is made from copper or brass). If this is the case, would the thicker Kluber UH1 do the job while having twice the kinetic viscosity compared to OKS 470 (110 vs 260 mm2/s)? Thanks
@yt.myworks 8 ай бұрын
I didn't look into the chemical composition of the lubricants, but according to the description, the Nevastane HD2T and the OKS 470 are suitable for spindles and guides on machines.
@tespanton3886 8 ай бұрын
@@yt.myworks Thank you for the reply! I'll give it a try since they both have similar properties.
@untitledduck9675 4 жыл бұрын
was there a part number on the motor
@elektromayster220v 3 жыл бұрын
👍👍👍
@tamasp1697 3 жыл бұрын
Very detailed vid. I got issue with esam 4200 srort grinding only 2sec in strong coffe settings could you help me what cause this problem thank you
@yt.myworks 3 жыл бұрын
Take out beans, make 5 coffees, ignore the error message. Then enter the beans again, the meal should readjust over the next 5-10 cups.
@stevierobinson4055 2 жыл бұрын
Thanks for the video. Do you have any information on getting hold of the brass nut please? I don’t really want to buy the whole system. Thanks
@yt.myworks 2 жыл бұрын
@stevie robinson search on ebay or amazon: amzn.to/2KxFrsq
@xXETouXx 3 жыл бұрын
Brilliant video! My ESAM3200 keeps getting stuck at the top right position. I usually screw the infuser back into home position (manually) and reset the error. It's happening more and more and I'm not sure why it's getting stuck. This morning, I got it unstuck, cleaned and greased the brew unit and the static post, and it got stuck right on the opening procedure (so there wasn't even coffee beans in the way). I know that the nut is worn out, do you think that could cause the machine to get stuck or get an error?
@yt.myworks 3 жыл бұрын
I think it's an electronic problem. I recommend performing a function test. Instructions are available on various forums. Lg
@xXETouXx 3 жыл бұрын
@@yt.myworks That was a quick reply! I will check it out! Nice video btw
@Momofan67 2 ай бұрын
Hello, what is the right Transmission Regalage for the position to synchronize the assencer once you turn on the machine? Thank you! Because at home it blocks the process that there is at the end of the video.
@yt.myworks 2 ай бұрын
Hi, did you take the transmission apart like I did in the video? Or did the error come by itself?
@FirstLast-hu5ln 3 жыл бұрын
Hi, very nicely made in depth video, though I have one question. Does the transmission lubricant need to be food-grade as well? I have seen another video saying it doesn't need to be, but I am not sure. Also should use silicone or lithium lubricant? Thanks
@yt.myworks 3 жыл бұрын
I recommend white grease, but grease for the food industry is not required. I wouldn't use silicone grease.
@sm7091bs 2 жыл бұрын
I used for the spindel a extreem pressure lubricant from Polytron. Penetration lubricant. This lubricant lowers the friction and the wear. It runs very smooth
@user-zu9dj2fd4z 2 жыл бұрын
Zer gut
@diegobrenna7641 5 ай бұрын
top
@katchogo 3 жыл бұрын
My Delonghi Magnifica's triangle light always turns on (even though the inside of the machine is clean). I already bought a new infuser but the triangle light still lights. I am still able to use my machine. I just have to turn it on/off until the infuser gets to the right position & the triangle light doesn't turn on. Do you think I need to change the transmission motor? Thanks
@yt.myworks 3 жыл бұрын
Unfortunately, I don't know if changing the transmission will help. The warning triangle can mean many different errors. First check all microswitches for correct function.
@vishnusadhana7426 2 жыл бұрын
Thank you for the video. After I replaced the nut and reassembled, I get the error "insert brewing unit". Any ideas on how to fix this?
@yt.myworks 2 жыл бұрын
You need to make sure all the cables are connected at the top.
@vishnusadhana7426 2 жыл бұрын
@@yt.myworks I checked all the connections and they are good. What's happening is the brew unit goes into a hollow position inside and when it goes up, it's not pressing the generator piston far enough to trigger the upper switch. I tried the test mode and motor up triggers the upper switch. So something seems to be wrong with either the electronics or the brew unit. Any ideas? Thanks.
@paul914 6 ай бұрын
Can you help. I like you have 2 sets of shim bearings. I know one set goes next to the thread but the second set just appeared. Do they go on the nut side of the body? thanks
@yt.myworks 6 ай бұрын
Hello, yes, one bearing is on the inside and the other on the outside where the safety nut is located.
@piotrz39 Жыл бұрын
Can I ask for help? When decalc working, there is no liquid from coffee nozle only from hot water nozle
@yt.myworks Жыл бұрын
With older models it is normal that the decalcification only runs through the water nozzle.
@fabriziobianchi9080 3 жыл бұрын
Hello I congratulate you, but I have to ask you how do you make the car work if you have forgotten the limit switch in the transmission?
@yt.myworks 3 жыл бұрын
@fabrizio bianchi: Not everything can be seen in the film. I haven't forgotten anything. ;-)
@spandauer67 Жыл бұрын
Erstmal vielen Dank für das Tutorial, wirklich klasse. Dann meine Frage, nach dem Zusammenbau und fetten der Spindel nebst Mutter, wo muss sie auf der Spindel positioniert werden, damit sie sich in der richtigen Position befindet? Gibt es eine Markierung?
@yt.myworks Жыл бұрын
Hallo, eine Markierung gibt es leider nicht. Du kannst die Spindelmutter erstmal in der unteren Hälfte positionieren und danach ohne Brühgruppe einschalten. Die Maschine findet ihre Grundstellung von alleine.
@spandauer67 Жыл бұрын
@@yt.myworks ahh cool danke für die Info
@landonkey3402 8 ай бұрын
I seem to have lost the various washers and bearings visible at 4:01 Are these available anywhere for purchase or will I have to replace the entire transmission?
@yt.myworks 8 ай бұрын
You have to look for thrust ball bearings. Unfortunately, I don't know the exact measurement.
@manubut3012 2 жыл бұрын
Hola me gustaría saber como se hace un test en La máquina delonghi ecam sin bote de agua
@yt.myworks 2 жыл бұрын
Hola, el tanque de agua tiene una parte de plástico en la parte superior que entra en la carcasa. Hay un agujero allí con un interruptor en el que necesitas insertar algo plano.
@patafterhours6172 3 жыл бұрын
Wszystko pieknie, moj ekspres po wylaczeniu bokuje sie w dolnej pozycji. Po wylaczeniu przyciskiem z tylu i wlaczeniu ponownie ekspres ustawia sie prawidlowo moge zrobic kawe ale po wylaczeniu znowu wyrzuc wykrzyknik. Obstawiam ze ktorys z sensorow padl, moze ktos sie spotkal z czyms takim?
@yt.myworks 3 жыл бұрын
Jest możliwe ale myślę że błąd jest gdzie indziej. Częstą przyczyną są za wielkie luzy na wałku z gwintem. Wtedy tzw. "reed sensor" nie może znaleźć pozycji. Nadmiar luzów możesz sprawdzić ruszając siedliskiem zaparzacza góra/dół.
@patafterhours6172 3 жыл бұрын
@@yt.myworks jest z 5mm luzu rzeczywiście, jak go zredukować? Wyciągnąć windę i dokręcić? Czy może jakieś podkładki dosztukować?
@yt.myworks 3 жыл бұрын
@@patafterhours6172 Zaznaczam że luzy są też w nowej przekładni. Wystarczą jednak jeden lub dwa milimetry za dużo i już nie działa prawidłowo. Przy demontażu należy wymienić mosiężną nakrętkę i tą mocującą u góry. Podkladki lub inne kombinacji nie polecam.
@patafterhours6172 3 жыл бұрын
@@yt.myworks dzięki pomogło, wszystko działa :)
@wekker090 2 жыл бұрын
How do you know were to set the spindle nut? great vid tho thx.
@yt.myworks 2 жыл бұрын
I always replace the spindle nut after five to six years of use. However, it also happens that the spindle nut is too loose, which results in an error message.
@davidbarton9397 Жыл бұрын
@@yt.myworks What error message do you get? My ESAM 3300 shows a flashing orange light (Preground coffee button) that I cannot figure out what sensor is causing this. Brew group well cleaned, greased, and orings replaced and moves smoothly, but each time it goes to tamp grounds (preground or grounds from grinder) the orange flashing light comes on and brew group returns to home position pushing out the unused, dry grounds.
@olifko 2 жыл бұрын
Hi mate, can I somehow adjust the end stop? Because on my machine the infusor pushes down on the tray so he push it away and I get error (insert tray) . Thanks for answer.
@yt.myworks 2 жыл бұрын
@Ondrej Filo you can only do that by repairing the transmission. The transmission becomes loose over time and in this case the coffee machine cannot find the home position.
@olifko 2 жыл бұрын
@@yt.myworks Hi again, today I repaired the transmission (cleaned, replaced the nut) and the problem with pushing the tray out is fixed. 👍 You are my hero 🦸🏻♂️Grüße aus der Slowakei 🇸🇰
@BarryElwyn123 3 жыл бұрын
Can anyone tell me how you extract the water tubes that fit into the steam boiler after you’ve loosened the brass nuts? (Delonghi 3500). Thanks.
@yt.myworks 3 жыл бұрын
@B J: Hello, I don't turn on the brass connections. You have to disconnect the Teflon hoses at the other end. Next week you can see in my new video how I do it. LG
@BarryElwyn123 3 жыл бұрын
@@yt.myworks ah but ... I have steam leaks coming out of the steam boiler joints where the water tubes join the boiler. I assume I have to pull out the tubes to do something- not sure what’s on the end of the tubes if anything. Your advice would be gratefully appreciated. Barry
@yt.myworks 3 жыл бұрын
They are connections made of brass. You can carefully try to pull it tight. The boiler is made of aluminum and breaks quickly. It is possible that the thread is already broken. I think you need to buy a new one with new tubes.
@BarryElwyn123 3 жыл бұрын
@@yt.myworks Thanks. Is there are sort of sealant I could use to smear over the join where the water tubes enter the steam boiler to stop the steam escaping? Barry
@yt.myworks 3 жыл бұрын
@@BarryElwyn123 I haven't used a sealant yet. Are there no spare parts in your country? I think replacing the parts is the best option.
@joaonobre5705 Жыл бұрын
hello in a corsi caffe delongui when I turn on the power of the machine does the tests of LEDs does not make the movement of the body of the coffee and the emergency light is always flashing. I load on/off and nothing ever seen the micro of the door is good. that may be....
@yt.myworks Жыл бұрын
Which model is it ECAM 2X.XXX? Which lights are flashing?
@joaonobre5705 Жыл бұрын
@@yt.myworks Esam 2600...
@joaonobre5705 Жыл бұрын
@@yt.myworks no
@MrNgo504 Жыл бұрын
Hi. I have a problem. The infuser comes down, but it doesn’t stop. It forces until enters in error. Do you have any idears about
@yt.myworks Жыл бұрын
Where does the infuser stop, in the basic position?
@MrNgo504 Жыл бұрын
@@yt.myworks after the error, a little above the down position.
@yt.myworks Жыл бұрын
In most cases the spindle nut is worn out. This means that the transmission cannot find the basic position. In this case, it must be repaired or replaced.
@MrNgo504 Жыл бұрын
@@yt.myworks you are right. Just bought
@MrNgo504 3 жыл бұрын
Need some help. Mine, doesn’t stop in the end, it forces on the end os the line, and then ask for infuser. What mi be the problem?
@yt.myworks 3 жыл бұрын
MrNgo504: The transmission may be worn out. This should be renewed or repaired. Read this post here (translate with google). LG www.berlin-repariert.de/delonghi-primadonna-s-ecam-familie-fehlermeldung-bruehgruppe-einsetzen/
@francksterlin4748 2 жыл бұрын
Hi, I found two small metal balls (2 mm diameter) that fall from the Delonghi Ecam 25 of a friend of mine when opening / removing plastic case for 3 years cleaning (was recurrent error code). Balls fall out just after removing case, not yet starting any internal disassembly. After cleaning, the machine seems working fine but still the two metal balls in my hand. Looks like bearing balls, but I do not have any idea where they come from. Do you have any idea ?
@yt.myworks 2 жыл бұрын
The balls can come from the transmission.
@francksterlin4748 2 жыл бұрын
@@yt.myworks Thanks ! Do you means there is a bearing on transmission ? At opposite side of motor ? (Because I don't see it on your video) How is it possible that still works...
@yt.myworks 2 жыл бұрын
@@francksterlin4748 Up in the transmission there are small ball bearings 3:36
@francksterlin4748 2 жыл бұрын
@@yt.myworks Looks like balls you pointed. Now I should find new parts but don't know if sold separately (will have a look on ebay or parts sellers website) Don't know how it is possible that ball gone out Only two seems missing (or I found only two of them) and machine seems working normally but certainly it could change
@yt.myworks 2 жыл бұрын
I have not yet seen that these parts can be bought separately. The transmission is usually available as a kit: amzn.to/3B5Q2TF
@magdylast9408 3 жыл бұрын
What was the error message you got? Was it " insert infuser assembly" or what? thank you
@yt.myworks 3 жыл бұрын
I haven't had an error message yet, but there were loud noises from the transmission. If this is also the case with your machine then you have to grease the spindle or replace the spindle nut.
@magdylast9408 3 жыл бұрын
@@yt.myworks Thank you , what was the size of the nut at the top of the spindle please ( spanner you grinded)
@yt.myworks 3 жыл бұрын
@@magdylast9408 Self-locking nut dimension M5
@adolfodominguez2631 Жыл бұрын
I have watched your videos and I’ve learned a lot from them,thank you for that! Like I said to you before I have a perfecta cappuccino and I’ve managed to clean and grease the brewing assembly and the transmission assembly but yesterday heard a strange noise and opened the door and I couldn’t get the brewing unit out..after I managed to take it off the rod was going normal up and down all greased but when put it back was blocked again down not up.. Took the brewing unit off again and now the transmission assembly it’s not working properly anymore and stays half way up and freezes there and won’t do his normal movement.. I think I need to change the whole assembly is in it ? Any advice will be very helpful and appreciated 😅
@yt.myworks Жыл бұрын
I would remove the transmission and check that everything is put together correctly. Apparently something is wrong ;-/
@adolfodominguez2631 Жыл бұрын
Thank you very much! It’s very hard to tell without seeing it.. that’s going to be a challenge as I never done it before and transmission is behind everything on this model..
@adolfodominguez2631 Жыл бұрын
Seems like it is something wrong with the transmission as doesn’t have that movement anymore I’ve removed the infuser and by himself goes up and when goes back down it won’t go on that channel .. if that make sense..
@yt.myworks Жыл бұрын
You can record me a short video and send me the link to yt.myworks@hotmail.com
@michael_by_PAWZONE 2 жыл бұрын
Bei mir war das Gewinde der Spindelmutter durch. Alles gereinigt, die Antriebsstange glänzt aber wenn ich die neue Mutter auf die Stange drehen will, stockt sie sobald die Mutter komplett mit ihrem Gewinde auf der Stange sitzt. Ohne Zange kein Weiterdrehen mehr möglich. Die ersten 2cm drehen sich also wunderbar auf die Stange, dann geht nix mehr :/ Auch mit einer zweiten neuen Spindelmutter genau das selbe. Hat jemand eine Idee?
@yt.myworks 2 жыл бұрын
@Hallo Michael in seltensten Fällen gibt es wohl unterschiedliche Gewindestangen. Habe schon viele repariert aber noch nie solche gehabt. Die Spindelmuttern sind gewöhnlich passend für Gewindestangen mit einem Außendurchmesser von Ø 8,80 mm. LG
@Steinthor-Tomtorrad 5 күн бұрын
Cześć. Czy smar do tej śruby w przekładni OKS470 można zastąpić jakimś innym. Możesz coś ewentualnie polecić jakiś zamiennik.
@yt.myworks 4 күн бұрын
Witam, CFG 1808 też powinien być wystarczająco dobry. Ogólnie zalecam produkty bez toksyn dedykowane do urządzeń kuchennych.
@DrMary32 Жыл бұрын
Hi! I have same machine but the issue might be different, it doesn’t respond to commands, if is plugged in, is playing alone: switching on and off, water comes out and in the end I cannot make any coffee as buttons are not responding to orders. What that might be? Thank you!
@yt.myworks Жыл бұрын
Unfortunately I can't say that, but it could be that the electronics or the control panel are broken. Does the machine show an error message? Red symbols or similar?
@DrMary32 Жыл бұрын
No errors shown on screen, only messing around doing everything, but no coffee.
@handblenderfoodfactoryrepa4313 8 ай бұрын
Hello
@kosinskipiotrek 2 жыл бұрын
Witam, nowy ekspres Primadonna Soul po tygodniu zaczął piszczeć - ćwierkać podczas pracy przekładni. Dźwięk wydobywa się od strony silnika a nie od strony zaparzacza. Co może być przyczyną? łożyska ślizgowe na silniczku?. Śrubę przekładni smarowałem smarem silikonowym ale to nic nie pomogło. Czytając opinie o tym ekspresie na Amazon parę osób też stwierdziło ćwierkanie po pewnym czasie.
@yt.myworks 2 жыл бұрын
Witam, trudno stwierdzić na odległość, czy dasz radę nagrać krótki filmik z tym problemem? Może wtedy coś będę mógł wywnioskować. Możesz posłać link na mój adres yt.myworks@hotmail.com albo wstawić tutaj do komentarza. Pozdrawiam
@kosinskipiotrek 2 жыл бұрын
@@yt.myworks kzfaq.info/get/bejne/asx_lMpyl7_DpGQ.html Taki sam dźwięk , pojawił się po tygodniu odkąd kupiłem ekspres
@yt.myworks 2 жыл бұрын
@@kosinskipiotrek Hm.. bardzo dziwne, przekładnia słychać ze chodzi prawidłowo. Mam akurat dynamikę w domu i przy chwili czasu zobaczę co by to mogło być. A co z gwarancją?
@kosinskipiotrek 2 жыл бұрын
@@yt.myworks Jest gwarancja ale wolałbym nie oddawać do serwisu bo podobno ekspresy wracają ponisczone. Czy w ekspresie jest jakaś plomba gwarancyjna, chciałbym sam rozkręcić i w razie czego nasmarować.
@kosinskipiotrek 2 жыл бұрын
@@yt.myworks Taki sam ekspres jak mój i taki sam dźwięk. Podobno silnik napędu, z serwisu wraca z takim samym problemem. kzfaq.infoUIn_43EVpR4?feature=share
@StanisawSwierczynski 3 жыл бұрын
Czym jest czujnik ten zielony z tego momentu filmu kzfaq.info/get/bejne/fsBoorSGrNq0mpc.html Posiadam model 2600 identyczny wewnętrza jak ten z filmu, problem: karetka zjeżdża na sam dół i blokuje expres , gdy ręcznie ustawie karetke wysoko expres sie uruchamia. Czy chodzi o jakiś czujnik ? czy trzeba zrobić serwis tej przekładni i zmiana na nową mosiężną nakrętkę?
@yt.myworks 3 жыл бұрын
Czujnik psuje sie raczej bardzo rzadko, najczęstszymi przyczynami są wyrobina nakretka i luzy na górnej śrubie przekładni.
@PiotrK2022 2 жыл бұрын
@ myworks Hej, mam do Ciebie pytanie... Posiadam Delonghi Esam 3100.SB EX1. Motyw jest z nim taki, że ekspres zaprzył dwie kawy i w momencie włączenia spieniacza zaparzacz dojechał do infuzora, zapalił się błąd ogólny i wraca do spoczynku. Próbowałem wył./wł. ekspres, zrobić reset wnętrze czyste i nadal jest to samo, przy czym teraz po wyłączeniu go zapala się alarm przy włączeniu, czyli sekwencja startowa następuje do momentu kiedy przesunie się blok do góry, zapala się alarm i wraca do poz. spoczynkowej. Sprawdziłem go pod menu serwisowym i napęd normalnie śmiga, kontrolki na krańcach się zapalają, więc nie jest krańcówka. Masz pomysł co może być w tym momencie?
@yt.myworks 2 жыл бұрын
Witam! Hm..., a co z Pompą wody? Daje jakieś oznaki życia? Czy bojler się nagrzewa? Sorry że tyle pytań ale nie znam maszyny.
@PiotrK2022 2 жыл бұрын
@@yt.myworksNie musisz przepraszać - rozumiem, że dopytanie o szczegóły jest kluczowe, bo znalazłem już informacje, że jak nazwa wskazuje błąd jest b. ogólny i powód jest zależny od dokładnego momentu w którym się uaktywnia. Nie odzywa się, ale odzywa się w menu serwisowym. Dokładnie to wygląda tak, ze włączam do prądu, pozycjonuje się zaparzacz i przechodzi w standby. Naciskam przecisk power, lekko podnosi się zaparzacz. Potem zaparzacz rusza znowu dojeżdżając do inzufzora, zapala się błąd ogólny, zaparzacz wraca do stanu spoczynkowego i migają LED-Y jedna oraz dwie filiżanki, i ekspres przestaje reagować na przyciski funkcyjne, jsk się domyślam procek blokuje z uwagi na wykrycie awarii... Kwestia grzałki to chyba nie będzie, bo sprawdziłem termiki oraz rezystancję i niby jest ok. Grzałki z tego co czytałem są spięte w szereg i razem powinny pokazać 42ohmy po przyłożeniu sond do styków górnej i tyle pokazują... Temat ciekawy, ponieważ generalnie w menu serwisowym działa wszystko, a jak włączę go normalnie to jest kicha...
@PiotrK2022 2 жыл бұрын
@@yt.myworks O - mam film z otwartymi drzwiami. kzfaq.info/get/bejne/a96XiMSSts3Wn2Q.html Start następuje do 18 sekundy i jak wspomniałem wywala błąd ogólny, zaparzacz zjeżdża do pozycji spoczynkowej i migają diody jedna oraz dwie filiżanki...
@yt.myworks 2 жыл бұрын
@@PiotrK2022 Nie chcę wprowadzić w błąd ale jednak obstawiał bym na przekładnię. Może być że dobija do końca góra czy dół ale jest jeszcze elektronika tzw. "reedplatine" która liczy obroty. Jeżeli jest za dużo luzów to wtedy nie może znaleźć prawidlowej pozycji. Oczywiście jeżeli objawy są identyczne jak na filmiku.
@PiotrK2022 2 жыл бұрын
@@yt.myworks Czyli co, na dzień dobry zacząłbyś od podmiany nakrętki, a jak nie pomoże to czujnika zliczającego obroty? Powiem Ci, że możesz mieć rację, ponieważ mój błąd - zaniedbałem ten ekspres i od jakichś 2-3 lat nie miał smarowanego napędu, tak więc moze być, że się wypracował, bo słychać było, że pracuje już na sucho. Miałem go przesmarować dzisiaj, no ale widzisz - nie zdążyłem...
@heima1299 3 жыл бұрын
Leider steht neuerdings beim OKS 470 auf der Tube nichts mehr von Lebensmitteltechnik. Das Symbol für Lebensmittelecht ist auch weg.
@yt.myworks 3 жыл бұрын
Auf der Tube steht jetzt ein "NSF" Zeichen drauf welches für die Zulassung/Registrierung in der Lebensmittelindustrie steht. Außerdem gibt es noch Restbestende im Handel mit der alten Kennzeichnung. www.oks-germany.com/de/produkte/oks-470-weisses-allround-hochleistungsfett/?productGroup=Fette
@chantalt.1547 2 жыл бұрын
Where can we buy the brass nut?
@yt.myworks 2 жыл бұрын
@Chantal Tetreault I buy mine on ebay or amazon: amzn.to/2KxFrsq
@chantalt.1547 2 жыл бұрын
@@yt.myworks thank you so much!
@jozsefmihaly9381 Жыл бұрын
Üdvözöllek! A segítségedet kérném. Kicseréltem az orsóanyát de nem pociciálja be magát a gép!! Mindig lefelé mozog és megszorul de nem áll le?! Minden vezetéket visszatettem és mégsem?Köszönöm.
@yt.myworks Жыл бұрын
Helló, ellenőriznie kell, hogy a végálláskapcsolók megfelelően vannak-e elhelyezve és csatlakoztatva. Az egyik lent található.
@jozsefmihaly9381 Жыл бұрын
@@yt.myworks Üdvözöllek! Amikor a szán az aljára ér a kicrokapcsoló kikapcsol..de a motor nem áll meg és ezért beszorul az egész!!!!!! Mindíg lefelé indul, bárhová tekerem az orsót!!! A felső micrókapcsoló is működik!!!!!Az orsó anya új!! Kicseréltem a nagykerék alatt lévő electronikát is.. semmi nem változott!!A mikrokapcsolónak meg kéne, hogy állítsa a motort nem?
@jozsefmihaly9381 Жыл бұрын
@@yt.myworks Esetleg nem jut el a microkapcsolóktól a jel a panelhez?
@yt.myworks Жыл бұрын
Ellenőrizze, hogy megfelelően szerelte-e fel a fekete műanyagot 5:33 arányban. Működtetnie kell az alábbi mikrokapcsolót.
@jozsefmihaly9381 Жыл бұрын
@@yt.myworks azt csak egy féleképpen lehet.?!
@SaitamaZ Ай бұрын
Can i help me to teu a fiz erro exame 23.210? When turn on the red alert is on. Any sugestion to test ?
@yt.myworks 27 күн бұрын
Hi, can you describe the error in more detail?
@SaitamaZ 24 күн бұрын
@@yt.myworks when turn on the display show only red alert (triangule). i disassembled and checked all switch are ok. if you have any contact say me.
@yt.myworks 24 күн бұрын
@@SaitamaZ yt.myworks@gmail.com
@shageevideo 3 жыл бұрын
No one will sell me that brass nut, Anyone have any luck.
@yt.myworks 3 жыл бұрын
Hello Richard, to which country would the shipment have to be sent?
@shageevideo 3 жыл бұрын
@@yt.myworks United States. My order from Germany got cancelled. I have one more order from Germany on ebay today I hope does not get cancelled.
@shageevideo 3 жыл бұрын
@@yt.myworks In the US no one will sell it to you unless you are a repair business.
@yt.myworks 3 жыл бұрын
@@shageevideo Current information from DHL on the corona virus: The shipping of small parcels to the USA will no longer be offered until further notice. For private customers, parcel delivery is only possible in conjunction with the "Premium" service (€ 16.00) until further notice.
@shageevideo 3 жыл бұрын
@@yt.myworks Thanks for the information. Hopefully I can get this part sooner but I may have to wait.
@kkellett80 8 ай бұрын
Hi, I just replace the brass nut ony ESAm 4400 because it was slipping. Excited for my first cup it cycles on by moving brew unit down and up. However once it goes up it stays and give a generic alarm warning. Cycling on and of does nothing. Cleaned brew unit and generator. Tested motor up/down and shows both limits are being engaged. Wondering if there is anything i am missing. In summary brew unit hits up limit and stays giving generic message. Thanks for your help and great videos!
@yt.myworks 8 ай бұрын
Hello, in this case I recommend checking the reed sensor for damage or correct installation. This sensor is responsible for counting the spindle revolutions; any deviation can lead to error messages. However, this sensor rarely breaks unless it has been damaged.
@LuisC202 7 ай бұрын
Didyou fix it? I have the same issues on my Delonghi.
@formbi 7 ай бұрын
generic alarm can also mean a damaged NTC
Savage Coffee
Рет қаралды 78 М.