you are welcome. Thank you.

you are welcome.

I like disassembling, inspecting and improving products. if you like to do this too.it's not difficult. if you don't like. You can use Delonghi Ecodecalk

you are welcome.

Is the black part you mentioned a gasket? If so, you can find places where these parts are sold below. Which country do you live in? You can ask the spare parts services in your country using the pictures or part numbers on their websites. All Parts www.ereplacementparts.com/delonghi-ec155-cappuccino-maker-parts-c-122345_122351_122731.html #Gasket www.ereplacementparts.com/gasket-p-695409.html #1 www.buyspares.com/coffee-maker/espresso/ec155/gasket/product.pl?pid=1234201&shop=delonghi&path=54536,54539&model_ref=11638868 #2 www.buyspares.com/coffee-maker/espresso/ec155/gasket/product.pl?pid=957649&shop=delonghi&path=54536,54539&model_ref=11638868 UK Link1 www.4delonghi.co.uk/coffee-maker/ec155/gasket/product.pl?pid=957649&path=606454,640993&model_ref=11638868 Link2 www.4delonghi.co.uk/coffee-maker/ec155/gasket/product.pl?pid=1234201&path=606454,640993&model_ref=11638868 General Parts List www.4delonghi.co.uk/coffee-maker/ec155/catalogue.pl?path=606454,640993&model_ref=11638868&page=1

no, it is not the gasket. it is within the part number 55 and is called ‘support’. at the website you gave me, it is not sold seperately. if you move to 2:23, you hold the part. it is a pair of black thingy within the side wall of the support. i have found it on ali express but it is expensive here. 20$ just for that pair of small part. i live in Malaysia btw.

​@@kasturiGM aa ok. I'm sorry on your behalf.I hope my ideas help you. This is the part you said. drive.google.com/file/d/12GYhNAHE9icGTCgVuZmkS9dd3N9MRL6T/view?usp=drive_link drive.google.com/file/d/1y4xUAHXC191JBALlBrn9neJk2wnz106m/view?usp=drive_link It will be difficult to find this part. And as you say, when you find it, it's expensive. #1) If it is divided into 2 or 3 pieces, try to combine it using glue. There are 2 of these black pieces. If the other piece is not broken. #2) Try making something similar with any material. Wood, plastic, metal. #3) After filling that gap with silicone or hot silicone and drying cut off the excess. #4) Contact companies that provide 3D printing services in your country and have them produce a similar part. (Send the other part to the place that provides 3D printer service or create a 3D model according to the dimensions of the other existing part.)

@@gokselsimsek ya..thank you. if i have the slx file, it will be cheaper to 3d print it.

kzfaq.info/get/bejne/g75pbKuk07jGlXU.html lütfen açıklamayı okuyun. please read the description. sizin için ingilizce çeviri yapacağım. i will translate english for you. makinenizi görmeden sorunu tespit edemeyeceğim için size bir video çektim. Sorununuz çözülmez ise bir video çekerseniz yardımcı olmaya çalışırım. Since I cannot detect the problem without seeing your machine, I took a video for you. If your problem is not solved, if you shoot a video, I will try to help.

The part I kept at 4:00 is the steam valve. I don't fully understand what you want to do.I can help if you write a little more detail

4:03 Are you asking about the white residue here? yes when i remove the thermostat the residue is some kind of thermal paste. sorry for the late reply

@@gokselsimsek I thought those thermostats were installed onto the boiler, 囧.

@@checkwhatsleft4565 kzfaq.info/get/bejne/g75pbKuk07jGlXU.html 2 brown pieces 1:14 / 02:19 ucuz ev tipi bir makina olduğu için termostatlar kazan dışında. evet haklısınız kazan içinde kullanılabilecek bir termostat kullanılmış olsa idi daha iyi sonuç verebilirdi. Since it is a cheap home machine, the thermostats are out of the boiler. yes, you are right, if a thermostat that can be used in the boiler had been used, it would have given better results.

@@gokselsimsek So the different thermal conductivity of the paste could lead to different temperature reading back to the thermostat as well.

@@checkwhatsleft4565 yes because of this problem you will find that the temperature is usually lower when you take hot water without the portafilter installed. To overcome this problem, it is necessary to make a pid controller mod. e.g kzfaq.info/get/bejne/arVyfK9y07G7k4U.html ---- i didn't bother to make pid controller I thought about enlarging the hot water boiler but for economic reasons (expensiveness in the country) forced me to postpone my plans. I couldn't buy a higher quality and expensive machine for economic reasons anyway. It is normal to have such problems on a cheap machine.

yes it is hermetically sealed. to avoid unnecessary steam output.