Demonstration on how to operate a Hydraulic Press Brake

Рет қаралды 74,860

Күн бұрын

Demonstrations on how to operate a Hydraulic Press Brake.
Doing settings on the machine to form a radius shape on the metal plate and to bend the metal plate to form a square shape.

Пікірлер: 48

@mikeevans6589 Жыл бұрын

Always give mad respect to those brakemen using machines that are outdated.

@1714elijah 11 ай бұрын

Very professional and informative. Thank you.

@PreciousBoxer 3 жыл бұрын

Good video. Very informative.

@MichaelSmith-sn8mr 4 жыл бұрын

Amazing brother. Thank you for demonstrating that machine. You gave a good lesson on operating that particular machine.

@LansingLine 2 ай бұрын

Cool video

@bigbubba6032 4 жыл бұрын

we always used the roll former for arcs

@kawshalyakarunaratne9172 Жыл бұрын

Thank you

@yesmachineryservice1732 Жыл бұрын

what is the use of the regulator in the control panel

@gesongeorge3262 Жыл бұрын

Machine model?

@PreciousBoxer 3 жыл бұрын

We use use galvanized templates where I work. Cardboard templates are brought in sometimes, by customers, for single-use projects.

@tworollersrollingmachine 2 ай бұрын

where are u

@MrDirk00 2 жыл бұрын

Don't forget wear safety glasses.

@deathwrenchcustom 4 жыл бұрын

"Alright Bob, we only have one more piece of material... so make this one count." 🤦🏽‍♂️🤣

@funone8716 2 жыл бұрын

Not sure that radius was even close to your template brotha

@rawvibes_821 Жыл бұрын

😊

@Onozitsthpopo 4 жыл бұрын

3:31 wait a minute

@kysarie9312 4 жыл бұрын

🤣🤣🤣🤣

@armed_but_blind2768 3 жыл бұрын

Nice radius check

@therklegacy229 4 ай бұрын

Look like he just learned

@jackfwoodward 2 жыл бұрын

You know, most companies and businesses involved with CNC machinery would at the very least train you up in terms of setting dies and punches, the variety of metals used, the fine detail involved in terms of angle allowance (1 degree under/over tolerance for most), the use of callipers for metal thickness, bend lengths, checking angles with a protractor. Screw it, just eyeball it with a pencil and call it a day!

@funone8716 2 жыл бұрын

Hey it's probably a part for one of those African helicopters that doesn't fly. Close enough.

@jakearrow8047 2 жыл бұрын

@@funone8716 racist much

@funone8716 2 жыл бұрын

@@jakearrow8047 seen the helicopters Karen?

@jakearrow8047 2 жыл бұрын

@@funone8716 u clearly never seen anything

@MrDarknightkiller 2 жыл бұрын

They had it scribed. Some one already did the measurements for it that why the piece came out as planned. This is an tutorial on the press break not the whole of machining

@glenncussick9781 4 жыл бұрын

🤦‍♂️

@chrystalblue7170 2 жыл бұрын

Wearing gloves while running machines are a great way to lose hands! Saw a few fingers and an arm come off from gloves getting stuck in machines and the people's hands got sucked in. Nope. I'll take the papercuts.

@petergay7629 2 жыл бұрын

Not wearing gloves is a rookie mistake. That's why you pay attention to what your doing and keep your hands away from moving objects 🤦‍♂️most that complain are why warehouses have saftey meetings

@aznation4592 2 жыл бұрын

I think wearing gloves is a must but those in this video are a bit big

@segov2860 6 ай бұрын

You must wear gloves, proceeds to show gloves that have never seen use and hugely oversized. Do we get much sharp edges in bending?

@deathwrenchcustom 4 жыл бұрын

Bends "square shape," pulls it out, looks at it, doesn't change anything, hits it again. 🤷🏽‍♂️🤣

@kysarie9312 4 жыл бұрын

Was thinking the same thing!!

@brandonsaeger2936 3 жыл бұрын

You just gotta keep hitting it man, more foot than the last time!

@duramax78 2 жыл бұрын

@@kysarie9312 if you’ve ever ran a brake if you hit the same bend same set up you will get a little more bend, tween 2-3 degrees.

@MrDarknightkiller 2 жыл бұрын

I'm a beginner at machining and I know that he hit the square bend twice cause it wasn't completely squared, you guys are hater because he perfectly bent the piece without an step back stop and he's black

@deathwrenchcustom 2 жыл бұрын

@@MrDarknightkiller 😆 Seems like you're a beginner at a lot of things... but conveniently you already know everything so I won't bother educating you. Also, you're a racist piece of crap.

@OsomaBinWeldin 4 жыл бұрын

You over bent it.... fix it

@pauldavis7334 10 ай бұрын

I’ve been running press break for 30 years and that guy looks like he doesn’t really know what he’s doing !

@jazmenriley8741 4 ай бұрын

I said the same thing my shop wouldn’t like him 🤣🤣

@engineering5911 Жыл бұрын

lol failed on the radius

@danmazur51 3 жыл бұрын

This is ridiculous! This guy doesn’t know anything about forming. First of all, you have to calculate what punch and die to use. Without going into all the steps that aren’t shown, at least he should be checking to make sure it fits the template ( not even close). Then he should at least check to be sure it’s 90 degrees!

@charleslangford6072 2 жыл бұрын

Looked 90(ish) to me. Maybe calm down and realise it's youtube? If you're so good why are you looking up beginners guides anyway?

@erdub84 2 жыл бұрын

Troll.