Thankyou. Yes important note and please all be sure to configure correctly my tweeter compleatly fried from ultra high frequency distortion using this exact setup above
@VinshineAudio2 жыл бұрын
I am so sorry to hear that. Do remember to turn down the volume prior to i2s configuration!
@10ozGold2 жыл бұрын
Excellent video Alvin. Thank-you. This is very helpful.
@VinshineAudio2 жыл бұрын
Glad the video is helpful!
@xyzDonaldxyz2 жыл бұрын
thank you very much for the closed captions.
@VinshineAudio2 жыл бұрын
It's auto CC.. .:)
@TheRealAudioDidact2 жыл бұрын
The first thing I thought was "quiet." the second thing I thought was "deep", and the third thing I thought was "danceable."
@VinshineAudio2 жыл бұрын
Lets dance :)
@TheRealAudioDidact2 жыл бұрын
Finally got the clock out working to the D300Ref!
@VinshineAudio2 жыл бұрын
Enjoy!
@Speccy48k2 жыл бұрын
I intend to connect a CD player (CDT2-MK3) on I2S-A HDMI and a streamer on I2S-B RJ45 (from Iris DDC) on the Terminator II. Are both IS2-A and I2S-C outputting at the same time on the DDC (mode 0) or do you need special configuration to e.g. enable I2S-C (RJ45) instead of I2S-A? Why I2S-C on the DDC and not I2S-B? Do you have to connect I2S-C from the DDC to I2S-C of the Terminator II / Plus? Also, is there a difference in sound quality between I2S RJ45 and I2S HDMI? Thanks
@VinshineAudio2 жыл бұрын
Hi Nicolas, please reach out to us at support@vinshineaudio.com, we will be able to assist you in details!
@laiguilleetlefeu32402 жыл бұрын
I use I2s from the Iris to my Pontus II without the Clock synch and it works well. What the differences with the clock synch ?
@pnddesign2 жыл бұрын
You should have a table with the different recommended setups
@VinshineAudio2 жыл бұрын
Clock sync only for the TII/Tplus :)
@wa23682 жыл бұрын
@@VinshineAudio Can a Denafrips IRIS be used a non-Denafrips DAC (DAC from another brand)? Or a pre-pro in a multichannel music application?
@TheRealAudioDidact2 жыл бұрын
yess
@VinshineAudio2 жыл бұрын
Cheers!
@joshuaschneck Жыл бұрын
Hi Alvin. My understanding is that when you use I2S output into I2S input on a DAC, the internal clock of the DAC is bypassed since the information is already clocked in I2S format. Is this correct? If so, would seem like the Iris is a poor match for the Terminator II/Plus since these two DACs have better internal clocks than what is in the Iris. Correct?
@VinshineAudio Жыл бұрын
Hi Joshua, it depends. For DENAFRIPS, all digital inputs are reclocked by the built-in crystals of the DAC. TII/TPlus may serve as as MCLK to output the clocks to sync with the DDC. The result would be interesting.
@backrack012 жыл бұрын
So do I need to figure out the pin configuration of the hdmi i2s cable I use and see if it will match the pin configuration of the DDC & Terminator?
@VinshineAudio2 жыл бұрын
It's highly recommended to go through the i2s pinout: www.denafrips.com/config-tplus
@ericc.handoko79622 жыл бұрын
I have follow the instructions, but mine is with gaia instead of iris. But the result was reverse left and right channel. How can I fix that?
@VinshineAudio2 жыл бұрын
Hi, please reach out to us at support@vinshineaudio.com We will sort it out :)
@backrack012 жыл бұрын
What specific test tracks did u use for this... the first 3? 160hz in phase, 160hz out phase?
@VinshineAudio2 жыл бұрын
You may download the test tone on the following link: www.denafrips.com/config-i2s
@k9trainingservices Жыл бұрын
What does the Iris actually do ?
@VinshineAudio Жыл бұрын
Iris is a DDC, Digital to Digital converter :)
@nathanbell69622 жыл бұрын
So is the iris or Gaia the best choice with only usb (using the clock from the t2)
@mikegoddard73542 жыл бұрын
The clock inside the terminator is far better than the Iris, you only buy the Gaia if the clock in your unit is inferior. Basically, the Gaia is great with mostly any other dac that is not denafrips, or you can use the iris if your dac can also accept the same clock signals that the Iris outputs. Not all dacs have equivalent clock inputs, like Gustard X26 pro only has a 10mhz clock input
@georgelin64722 жыл бұрын
@@mikegoddard7354 I thought the iris only have clock input not output And ya it’s not 10mhz
@VinshineAudio2 жыл бұрын
Iris is a smart choice if you use the USB input only :)
@mikegoddard73542 жыл бұрын
@@VinshineAudio I chatted with you over email during the black friday/thanksgiving weekend holiday. I must say my friend, this Pi2AES is an astounding unit. Jitter at -142 db is insane with i2s output, and has honestly been the only thing I have heard so far in all my equipment that has brought a major and vast change to my system. At only 200 dollars this unit is an insane bargain and also to my knowledge they are about to release a new HAT that's even better than the one I have. Not sure if you have had a chance to hear it, but highly suggested here.