Density Based 4 Way Automatic Traffic Signal Control System Using Arduino and IR Sensor

Рет қаралды 55,796

5 жыл бұрын

In this video tutorial, we will learn how to make a density based 4 way automatic traffic signal control system using Arduino and IR Sensor. This is a very easy and common project among college and school students.
If you want to build your own customized Arduino Project or PCB Design. I can help you via Fiverr. You can visit my Fiverr account following the link below
-----------------------------------------------
Arduino Programming Fiverr link: www.fiverr.com/share/2AVdW8
PCB Design Fiverr link: www.fiverr.com/s2/266cae110b
----------------------------------------------
Components list:
---------------------------------------------
• Arduino Nano: amzn.to/30hz6d2
• IR Sensor: amzn.to/3kW9OsB
• 10k Resistor: amzn.to/2FVJ2SE
• 330ohm Resistor: amzn.to/3mTwyeF
• 100ohm resistor: amzn.to/372gQIM
• Red Led: amzn.to/3ibq5bu
• Green Led: amzn.to/2ScCEZA
• Yellow Led: amzn.to/3mZ4SVX
• Veroboard: amzn.to/339PQ7X
• Some Jumper wire: amzn.to/30eRoeP
---------------------------------------------------------
Circuit Schematic: photos.app.goo.gl/vg43mG6M4Ck...
---------------------------------------------------------
Source Code: drive.google.com/open?id=1VUx...
---------------------------------------------------------
Related Project:
---------------------------------------------------------
Automatic Railway Gate Control System: • Automatic Railway Gate...
---------------------------------------------------------
IoT Projects:
---------------------------------------------------------
* Facebook control Home Automation:
* Esp8266(Nodemcu) Weather Station : kzfaq.info/get/bejne/rsh2f6mi1bO0k2yb.htmlttps://y...
* ESP8266(Nodemcu) with blynk: • IOT Based Home Automat...
* ESP8266(Nodemcu) with Thinkspeak: • ESP8266 (NodeMcu) with...
* ESP8266(Nodemcu) Web server control : • ESP8266 (NodeMcu) with...
* ESP8266(Nodemcu) with Gmail: • IOT Based Gas Leakage ...
-----------------------------------------------------
Arduino Projects:
-----------------------------------------------------
* Bluetooth control Home Automation: • How to make Home Autom...
* Home Automation: • Arduino Home Automatio...
* RFID based security system: • RFID-RC522 Based Secur...
* Gas detection project: • How to Connect MQ2 Gas...
* DHT11 Humidity and Temperature: • DHT11 Humidity and Tem...
* Ac voltage control using Arduino: • Arduino AC voltage Con...
* Password based door lock: • Password Based Door Lo...
* Arduino based radar system: • Arduino Based Radar Sy...
* Led matrix scrolling display: • Arduino Led Scrolling ...
* Arduino audio player: • Arduino Audio Player w...
* Arduino clock: • Real Time clock using ...
----------------------------------------------------
Audio Source:
----------------------------------------------------
Living by PANASONIC / pika5onic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Living - PIKASONIC (No...
#Density_Based_4_Way_Automatic_Traffic_Control_System_Using_Arduino
#density_based_traffic_signal_system_using_arduino
#traffic_control_system_using_Arduino
#4_way_traffic_control_system_project
#density_based_traffic_signal_system
#density_based_traffic_control_system_using_IR_sensors_and_arduino

Пікірлер: 139

@CELINELAWYIKWENMoe Ай бұрын

God bless you sir, you are excellent!!!❤

@surajpatil3247 5 жыл бұрын

Please sir make video on explaining how you made this project from beginning

@leen-lh6ji Ай бұрын

excellent!

@prashantkgyan8703 Жыл бұрын

Nice work

@gregoryakau5683 5 жыл бұрын

God bless u sir....

@prasadchavan6875 3 жыл бұрын

Thank you very much sir🤩🙏

@ouissaljbilou3416 3 жыл бұрын

Thanks a lot💜

@emrengineer 5 ай бұрын

hello, what kind of system can I install if I want to measure the traffic density on a winding road. i want something low cost and functional. it should be a system that can transmit this density to another device and show the density. i would be very grateful if you could help me. is lidar sensor used? which one do you think is advantageous?

@edwardmackez6497 5 жыл бұрын

how do you combine IR receiver and transmitter into one module. coz i happen to have them separately

@user-yh9fn1xy4m 9 ай бұрын

Hello, can anybody help me with the changes that have to be made in the code, if we are using readymade IR sensor module instead of separate emitter and receiver? Also according to the circuit diagram, the sensors at A6 and A7 are not grounded? Is that correct?

@kridakaha 4 жыл бұрын

Can i use ir transmitter and reciever midule

@e-teslaacademy1031 5 жыл бұрын

Thanks for given code and circuit diagram

@jayeshsarang562 4 жыл бұрын

bro i have to make a project using 3 different sensors so please tell me which will be the best topic;such that project should be based on real life example.

@jeremywanguche2095 5 жыл бұрын

can you help me with how you analyzed your data for the final documentation

@farazsarwar6217 4 жыл бұрын

hey.. i work on this acc to ur diagram and copy same code but there is a problem tht traffic light is working properly but sensors are nt working... plz help day after tomorrow is last date of submiision nd i hve to complete it by tomorrow

@aravindkrishna5374 5 жыл бұрын

what is the algorithm you have used sir?

@farahinsallehin2841 4 жыл бұрын

hi sir..can i use IR obstacle with digital output?

@dhwanittadvi4269 Жыл бұрын

Sir is circuit diagram and code correct bcz i m facing one problem with sensors they are detecting object but not giving signal to arduino to turn on the led of that side pls help urgent three sides are working a,b,c but d not working

@ruchisingh4309 4 жыл бұрын

Is there no alternative than vero board

@dynamictech15 Жыл бұрын

3rd condition is not working so what to do in this case.

@RahulThakur-cv7ti 5 жыл бұрын

sir can u make the video on the explanation of the source code

@abcme6962 5 жыл бұрын

can a highschool student handle doing this for a project?

@teryimasolomon1225 4 жыл бұрын

Good morning sir, I use arduino mega 2560 to run the code but its not displaying as you showed in the video, pls how I get the details of the work

@FliteRC 5 жыл бұрын

thanks a lot

@RazibShahadat 5 жыл бұрын

You are welcome.

@samyektiwari 5 жыл бұрын

sir would u do not mind to say where we can get this combine ir sensor and its name sir

@vikasprajapati4239 5 жыл бұрын

Sir please make a video for a emergency vehicles traffic light

@redarrowsgaming815 4 жыл бұрын

hello,= bro, I want to make same project but instead of ir sensor i want sound sensor can you make code for that

@omsuryawanshi6093 3 жыл бұрын

Can I use bread board

@aroubasheikh8631 4 жыл бұрын

Sir, I tried this project but when I put equal density on all ir sensors the project did not run on priority based but with no density it runs on priority based. Why the priority is not following with equal density on all ir sensors? Kindly help.

@nabeelmurtaza6981 Жыл бұрын

because of once sensor detect someting then signal of that road open

@edwardmackez6497 5 жыл бұрын

Hello, i would like to design the same project as my school project but i don't have a lot of hardware knowledge, like putting those components together and more though i have the programming skill. So can you help illustrate how you put the components together and how many IR Transmitter Sensors and IR Receiver Sensors do i need for this?

@syafiqshukor5942 5 жыл бұрын

i use IR obstacle sensor which is it include transmitter and receiver

@nareshkumartiwari1977 4 жыл бұрын

Ldr doesn't work with black colour

@sahanaakter806 2 жыл бұрын

why ir sensors not working??

@premkumar-hm5ro 4 жыл бұрын

Can u explain me about supply.......pins to which the out put of transformer should be give

@premkumar-hm5ro 4 жыл бұрын

Plzzz help me to do this project... Plzzz

@harshal_ajetrao 4 жыл бұрын

Hello sir I want to purchase this project with circuit diagram, program code, and with some changes.What it will cost ?

@pallavirana9107 5 жыл бұрын

I need help

@kalyanitangade8302 Жыл бұрын

BTW what is a1,a2,b1,b2,c1,c2,d1,d2 in the proteus diagram???

@deepae1714 4 жыл бұрын

sir can you send link for this software plzz..

@RupeshKumar-tn7wt 4 жыл бұрын

U have used capacitor in the model but mentioned in circuit diagram

@leninsurendranm6423 5 жыл бұрын

Pls provide the complete details of materials,their model and rate..

@darshang1357 2 жыл бұрын

Sir my Arduino nano board is not detecting

@dhwanittadvi4269 Жыл бұрын

Can i use arduino mega instead of nano

@RazibShahadat Жыл бұрын

Yes you can

@adhrinathk8525 5 жыл бұрын

the image given along with this video does not help us to recognize the A, B, C and D IR sensors. So kindly request you to update the circuit diagram by marking this.

@johnsonkennedy684 4 жыл бұрын

Thanks, it works fine with little corrections with sensor pins.

@aroubasheikh8631 4 жыл бұрын

I tried too but mine is not working well. Can you please tell me the modifications you make in this code ?

@Rahul26094 2 жыл бұрын

Bro can you tell the corrections you have done please bro I want to my project tomorrow please

@sahanaakter806 2 жыл бұрын

Tell me what corrections plz tell me 😭

@dhwanittadvi4269 Жыл бұрын

What changes have u made pls tell urgent

@anushkagaikwad7739 10 ай бұрын

Plz tell the corrections

@storyteller5678 9 ай бұрын

Sir can you please tell how much components required in detail

@royacademy97 3 жыл бұрын

If you don't mind I would like to buy your project

@mdKitchenyoutube 4 жыл бұрын

full circuit send karo please circuit diagram me risitor nahi he 10k resisitor circuit is not working ...

@meghanaprasad3548 5 жыл бұрын

The code is not opening

@Gentertainment717 2 жыл бұрын

Sir, full details project please

@leminakory5960 5 жыл бұрын

How you activated pins A6 and A7 plz I had a problem in this

@RazibShahadat 5 жыл бұрын

You can only read the analog value using A6 and A7 pins.

@stevejebu9134 2 жыл бұрын

Can we use arduino uno instead of arduino nano?

@RazibShahadat 2 жыл бұрын

Arduino uno hasn't enough pin for that.

@shivkushwaha5356 5 жыл бұрын

thanx brother I was waiting this project 😊😊 but where is code and systematic

@RazibShahadat 5 жыл бұрын

Please check the video description.

@shivkushwaha5356 5 жыл бұрын

Razib Shahadat thanx

@naveenmadala9463 5 жыл бұрын

Bro can u send the code for this project

@syafiqshukor5942 5 жыл бұрын

Hello sir, If i change the Ir transmitter and receiver to IR obstacle it is okay?

@RazibShahadat 5 жыл бұрын

What does the sensor output? digital or analog, if the answer is analog the code will be work. if the output is digital you need to change the code.

@syafiqshukor5942 5 жыл бұрын

Analog.. thanks sir 👍🏻

@syafiqshukor5942 5 жыл бұрын

@@RazibShahadat sir, it is not compatible to arduino uno? or just nano ?

@rpian1999 2 жыл бұрын

@@RazibShahadat How will I change the code when I am using digital output?

@abhilashakumari5846 5 жыл бұрын

can i use uno instead of nano??

@RazibShahadat 5 жыл бұрын

No, you can't use Arduino Uno. This project needs 8 analog pin but Arduino Uno has 6 analog pin.

@bangargaurav1636 5 жыл бұрын

I used UNO but I had to then work with three IR sensor instead of 8

@deepae1714 4 жыл бұрын

sir how to select port in the tool ..i can't do it plzz tell me sir

@RazibShahadat 4 жыл бұрын

First, open the Arduino IDE(soft) and go to Tools option and select your board like (Arduino UNO/ Arduino Nano) then select the port like (COM3/COM5 etc).

@badigineniyogesh9032 2 жыл бұрын

Bro can u paste it again in your drive ( source code)

@stevejebu9134 2 жыл бұрын

Did you use IR sensor module in this project

@RazibShahadat 2 жыл бұрын

No. IR TX Rx.

@sahalms3023 5 жыл бұрын

sir,kindly send the code and circuit diagram

@namskar6933 3 жыл бұрын

Can u please give me its proteus file or tinkercad please

@shailendrasinghjhala9579 5 жыл бұрын

plz tell me full detail of the circuit I want to do this project what use of 10k & 100ohm resistor

@kaviarasan2760 5 жыл бұрын

Sir I need this circuit diagram and how to connect sensor wires

@RazibShahadat 5 жыл бұрын

kzfaq.info/get/bejne/eax9raWlmNrFZKM.html

@smitrathod6983 5 жыл бұрын

Sir lf i connect only 4 ir then I should do changes in source code

@RazibShahadat 5 жыл бұрын

If you use the 4 IR sensor then you need to change the code.

@smitrathod6983 5 жыл бұрын

@@RazibShahadat what will be the changes

@smitrathod6983 5 жыл бұрын

@@RazibShahadat sir please tell me what will be the changes in the source code

@dibyakanungo7548 4 жыл бұрын

Hey smit...i need.your help for this project...please can you help??

@harikapachipulusu9243 5 жыл бұрын

Sir, do we need arduino nano usb cable?

@RazibShahadat 5 жыл бұрын

Yes, you need an arduino nano cable for uploading the code.

@harikapachipulusu9243 5 жыл бұрын

@@RazibShahadat thank you sir

@amalaitmouddar7983 5 жыл бұрын

why we need 2 sensor IR in each road and what the distance can be between them in the reality?

@RazibShahadat 5 жыл бұрын

We need two IR sensor to measure the traffic density on each road.

@amalaitmouddar7983 5 жыл бұрын

@@RazibShahadat a1 means the IR sensor beside the traffic signal in the road A and a2 means the IR sensor far from the traffic signal in the same road????

@RazibShahadat 5 жыл бұрын

@@amalaitmouddar7983Yes you are right.

@amalaitmouddar7983 5 жыл бұрын

@@RazibShahadat Tnx, can you give your facebook or email.... to contact you?

@amalaitmouddar7983 5 жыл бұрын

@@RazibShahadat what you mean by the traffic status is normal??

@snehad.4803 4 жыл бұрын

Hello sir i want this project details, means how to set up all this, plz help me its urgent

@RazibShahadat 4 жыл бұрын

Circuit diagram, component list, and source code of the project are given in the video description.

@dikshawaghmare7679 5 жыл бұрын

Can we use Arduino Uno instead of Arduino Nano??

@RazibShahadat 5 жыл бұрын

No, you can't use Arduino Uno. This project needs 8 analog pin but Arduino Uno has 6 analog pin.

@harikapachipulusu9243 5 жыл бұрын

Sir, do we need ir module or individual ir receiver and ir transmitter?

@RazibShahadat 5 жыл бұрын

Its your choice, if you use IR module then you need to change the code. In this project i am using individual IR transmitter and receiver.

@rpian1999 2 жыл бұрын

@@RazibShahadat Sir, did you simply use IR sensor or did you use PIR sensor in the project? Because in TinkerCad, IR sensor doesn't work upon simulation while PIR works on simulation

@badigineniyogesh9032 2 жыл бұрын

Bro the source code is not downloading bro ,it was deleted in ur drive

@chirodipsantra2082 5 жыл бұрын

Code link is not open

@RazibShahadat 5 жыл бұрын

Just download the code and unzip the file.

@RupeshKumar-tn7wt 4 жыл бұрын

Sir where is the external power supply in circuit diagram?

@KuRgY-fm7ww 3 жыл бұрын

I believe it is powered from Arduino's own power supply

@madhamanideep5453 5 жыл бұрын

Code is not opening... Please help...

@madhamanideep5453 5 жыл бұрын

Can we add 7 segment display and show how much time the vehicles should wait.?..

@ASHISHKUMAR-pj6me 5 жыл бұрын

Sir please give me code and circuit diagram

@RazibShahadat 5 жыл бұрын

Please see the video description.

@paragrathod4886 3 жыл бұрын

Sir code is not available this link Piz send the code

@RazibShahadat 3 жыл бұрын

The code is available in the video description.

@paragrathod4886 3 жыл бұрын

@@RazibShahadat But me link open ki par code Nahi open hi ho raha

@sanaullahkayani6481 5 жыл бұрын

Sir, Can i make this project by using Arduino Uno?

@RazibShahadat 5 жыл бұрын

No, you can't make it using Arduino Uno.

@sanaullahkayani6481 5 жыл бұрын

@@RazibShahadat but why sir, kindly tell reason

@sanaullahkayani6481 5 жыл бұрын

i want to make same project with 3 ir sensor on each road (4 way traffic signal). Kindly tell that, can we build by using arduino uno with reason please

@sanaullahkayani6481 5 жыл бұрын

@@RazibShahadat sir plz tell me.

@RazibShahadat 5 жыл бұрын

@@sanaullahkayani6481 because arduino uno have not enough pins.

@anuradhapotdar7929 2 жыл бұрын

Sir code is not available

@RazibShahadat 2 жыл бұрын

Please check the video description.

@IsratJahan-sw4bn Жыл бұрын

I need the source code

@RazibShahadat Жыл бұрын

Check the video description.

@rajatmishra410 4 жыл бұрын

There is compiling error showing in the program......compile error:stray '\302' in the program......so kindly help........ Also I want to know abt the serial.print('\t'); What is "t" in this case....u have not assign this

@prashantsinha6781 4 жыл бұрын

I am ready to pay 10k rupees. will u give me?

@RazibShahadat 4 жыл бұрын

I am from Bangladesh.

@prashantsinha6781 3 жыл бұрын

@@RazibShahadat can u please show the circuit that you have joined with a little clarity. i want to make but I don't know how you have joined the wires. i am very new

@prashantsinha6781 3 жыл бұрын

@@RazibShahadat plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz