No video
Design Tips for Sheet Metal Bending
Рет қаралды 6,684
@DesignInsightofficial 8 ай бұрын
best video i've ever seen regarding sheet metal. Thanks a lot
@SmallPressBrake 5 ай бұрын
thank you very mcuh for sharing
@sagabundlehund5690 2 ай бұрын
The Animation and Explanation are very good, but why this annoying music?!
@xIsouLcruSHca 6 ай бұрын
At 1:37 you say that the length of the cut relief should be bigger than the radius of the bend. Lets say i was to bend 3mm thick steel at an angle of 90 degrees, should L be longer than 90mm? Or how do i calculate this since L is in mm and the bend is measured in radius?
@doksfrommars 3 ай бұрын
Radius is a value in mm not degrees. For a 3mm steel bend radius would mostly be between 3 and 5 mm unless you bend specifically with BIG RADIUS tools. Bend radius should be equal or bigger than the thickness of material. See 0:50
@phoenixeditingworld6688 5 ай бұрын
You guys are doing froad with us they don't give payment after the delivery of material please give my money
Ekeeda GATE & ESE
Рет қаралды 2,5 М.
Xometry
Рет қаралды 17 М.
1donagin
Рет қаралды 435 М.
Mohammad Alzghoul
Рет қаралды 62 М.
Pask Makes
Рет қаралды 1,6 МЛН