Are you looking for a rubber extruded part? Minor Rubber has been making them since 1914! Our extruding capabilities include profiles and tubing, cut washers, gaskets, vulcanized spliced gaskets, molded or injection molded corners, strips, and cord and seals in long lengths on reels, coils or cut lengths.
Minor Rubber manufactures custom profiles, tubing, washers, and gaskets using our state-of-the-art extruding facility. We have the capabilities to produce extruded parts in simple or complex shapes, long lengths on reels or in coils, and fabricated with holes, notches, or special cut-outs. Gaskets can be manufactured with molded or injection molded corners
For more information visit:
www.thepartgurus.com/
www.minorrubber.com/
www.rubberengineeringguide.com
------------------------------------------- Contents of Video -------------------------------------------
0:09 4 methods for extruding rubber
0:24 Uncured Rubber
1:12 Steam cure
1:26 Molded Corners
3:11 Extruded gasket assembly
4:05 Data marked parts
4:19 Tooling cost is minimal
Minor rubber offers rubber extruding include profiles and tubing, cut washers, and gaskets located in the U.S.A. Our rubber extrusions include:
Vulcanized spliced gaskets
Gaskets with molded or injection molded corners
Simple and complex shaped seals, washers and gaskets
Strips, cord and seals in long lengths on reels or coils, or as cut lengths
Tubing and profiles in long lengths on reels or coils, or as cut lengths
Holes, notches, and special cut-outs can be fabricated into our extruded product
Minor is able to extrude a variety of materials, including SBR, Neoprene, and EPDM. Tubing and Cord sizes range from 1/32” I.D. up to 7” O.D., and wall thicknesses as thin as .040”. Profile shapes can range from .125” square up to and including 8” square. Wall thicknesses on extruded profiles, like tubing, can be as thin as .040”, but will depend on the shape of the cross section.
We offer compression, transfer, and injection molding, allowing us to manufacture your part using the most effective method. We also offer latex dip molding for boots and bellows. Molded products can be produced using a variety of materials, durometer hardness, and colors to meet your application’s requirements. In addition to commercial grade materials, we manufacture parts using specification grade materials that meet or exceed Mil-Spec, ASTM, SAE, ANSI, and FDA standards, and can develop special compounds for your part if required.
Go to www.thepartgurus.com/ to find a video showcase of America's best suppliers of custom parts and services
Find out more about Minor Rubber at: www.minorrubber.com/
🟢 Watch next: • MINOR RUBBER
#AmericanManufacturing #ContractManufacturing #ManufacturingIndustry #PartGurus #design2part #Rubber #RubberExtruders #RubberMolders
Have any questions or need a contract manufacturing supplier for your next or current projects. Contact us at: www.thepartgurus.com/contact