Game Changing UTE setup BUILD

Рет қаралды 144,569

29 күн бұрын

Second episode for my Ultimate moto setup build. I've always wanted to build a moto setup for the back of a tray with 2 bikes and useable space underneath, it also happens to resemble a cybertruck. In this episode we design and build the canopy, slide mechanism, locks, winch mounts as well as testing everything out. I do this using CAD, FEA, a CNC plasma cutter, a CNC laser cut, a CNC press-brake, MIG and TIG as well as a mix of powertools and handtools!
WIN 1043 piece Kincrome Toolbox: designedandbuilt.com.au/kincr...
First episode: • Dedicated moto Ute (Slide Mechanism)
Canopy Series: • Canopy Build
Designed and Built
Workshirt: designedandbuilt.com.au/produ...
Merchandise: designedandbuilt.com.au/shop/
Website: designedandbuilt.com.au/
Instagram: @designedandbuiltofficial
Channel Sponsors:
- Kincrome
- Goodyear
- barratheworld.com
- Raceworks
- www.lcs4x4.com.au
0:29 Dirt Bike Canopy Design
1:01 Material selection
1:29 Frame Construction
4:52 Sheet Metal Construction
5:10 CNC Plasma Cutting Aluminium
6:15 CNC Press Brake Folding
9:25 Sheet Metal Construction
11:21 Structural Supports
15:17 Sheet Metal Construction
18:39 Looks like a DIY Cybertruck
18:45 Last 2 panels
19:41 Slide Mechanism
20:00 Sled Construction
22:02 Extension Construction
22:31 Bearing Carriers
24:13 Front Wheel Carriage
26:00 Winch Mount
27:55 Assembling Everything
28:47 Foot Peg Holders
29:59 Lock Design
31:21 Doors
32:29 1st Test
35:45 Conclusion

Пікірлер: 285

@dylantaylor8931 26 күн бұрын

“I completed a stress analysis on the frame” is a very rare sentance in the 4b backyard fab world 😂. Very impressed mate.

@scuffedthings530 20 күн бұрын

Those 35 min would have been a 15 episode series on any other youtube channel 😅😂 Btw you might want to look into the bottom plate of the front wheel carriage again, currently the bottom of the wheel is just held in place by friction. Adding some horizontal slots into the plate or making a larger cutout for part of the tire to fit in might prevent it from slipping out of it, especially if its wet and the tire muddy :)

@DesignedandBuilt 10 күн бұрын

Thanks mate, good idea - I like it.

@haphazard1342 25 күн бұрын

I'll tag on another bit of advice for your latches, since they are to be the primary retaining mechanism. You should add a small tab/edge on the sliding carriage's striker plate, so that it captures the flap on the latch. This way, you pull the carriage past the lock, and then back it off. The flap rests against the current back edge of the striker and is retained by the tab/lip so that it cannot come undone unless you lift the entire carriage again. This mechanism will be very simple to add to the existing, and it will provide a level of security against bumps, jostling, damage to the retaining spring, and accidental misuse. Of course you may find that, if you have made the lock and striker out of mild steel, that they self-form this feature! Very cool build, super excited to see the next episode.

@DesignedandBuilt 22 күн бұрын

Thanks mate! Appreciate it.

@andrewhead997 27 күн бұрын

Love to constant use on the hammer for comedic relief

@robertgeddes511 27 күн бұрын

Have you thought of using some over center clamps on the foot pegs . To clamp down on to a location fixture. When I have made triangle shap door I laser cut a slot on the bend line 30mm in from the edge to the point the brake press tooling can't reach. And weld up after it bent.

@DesignedandBuilt 22 күн бұрын

Cheers Robert, good idea!

@bannablitz247 27 күн бұрын

Hey Richard! Not sure if this is of concern to you, but your bearing nylon lock nuts for the roller bearings seem to barely engage. I believe I was told it's a standard in aerospace to have 1 thread exposed on all nylon lock nuts. Just food for thought! Build looks great! Also, most industrial mechanisms that hold any weight rely on the lock and NEVER on the cable or winch rope. Take commercial portable spot light stands they crank up and then are lowered onto the locks.

@DesignedandBuilt 27 күн бұрын

Hey mate, yep agree 100%. These were off shelf one and I just wanted to test if they work! I can order some custom length threaded ones for some more cost $$$! Agree re winch rope, I will drive around resting on the locks! Cheers ☺

@treverpowell4319 26 күн бұрын

My work requires 2 threads exposed minimum on all hardware and nylon nuts are a one time use real pain when you have to torque a castle nut and it doesn’t line up for the pin

@RWB1111 26 күн бұрын

@@treverpowell4319yeh most places this is the rule I have found

@MM..FixinBuildinFarmin 27 күн бұрын

Mate, you have created something I’ve been dreaming up for years! This will surely inspire more of the moto community to have practical and more usable tray set ups. Love what you do Richard 🤙

@DesignedandBuilt 25 күн бұрын

Thanks mate!!!

@bubscat2984 Күн бұрын

Apparently great minds think alike! I designed a very similar slide lift earlier this year. What are your plans to bring to market? I'm in the states, we should talk.

@DesignedandBuilt Күн бұрын

@@bubscat2984 No plans to take it to market! Just something for me haha.

@Unclepooly 27 күн бұрын

A master at work! 💪

@DesignedandBuilt 26 күн бұрын

Thanks Uncle Pooly! Legend.

@chrismoore4406 22 күн бұрын

So good mate - awesome seeing more incredible fab stuff again and the editing is unreal.

@DesignedandBuilt 22 күн бұрын

Thank you Chris!! Appreciate the kind words, glad you enjoyed it 👌🏽

@FVT-tn8ji 23 күн бұрын

Such a sick project, can't wait for the next episode!

@DesignedandBuilt 10 күн бұрын

Thank you!!

@carter240 17 күн бұрын

Man, the skills involved with this are amazing alone. Then add the production quality and walk through. I’ll be levelling up my CAD skills this year now. Thanks for the inspiration!

@DesignedandBuilt 17 күн бұрын

Thanks mate! Glad you have inspired you, get after it 👊

@Crackdown77 24 күн бұрын

That's one of the best fab projects I've ever seen! Cheers from Italy!

@DesignedandBuilt 22 күн бұрын

Thank you!

@antoniolawack3952 24 күн бұрын

I am a Music teacher from South Africa and I'm just blown away by your engineering, designing and manufacturing talents. I would never have dreamt up designing something like this. WOW!!!! Many congratulations. Thank you for the quality videography and your likeable presentation style. I am most impressed. Regards from a cold Port Elizabeth.

@DesignedandBuilt 22 күн бұрын

Thanks mate, super kind words!! Glad you enjoy it.

@jdenmark1287 26 күн бұрын

Good on you for your transparency and integrity! Wish more engineers were like you.

@DesignedandBuilt 25 күн бұрын

Haha there are plenty!

@mrpmackon 16 күн бұрын

Love it! Great work!

@DesignedandBuilt 10 күн бұрын

Thank you!!

@youfritter 13 күн бұрын

Great comment about just making do with what you have. Brings all of us back yarders into the conversation.

@DesignedandBuilt 10 күн бұрын

For sure!

@aaronrudd3687 27 күн бұрын

Great video mate , loving the fabrication process and trial and error etc. great to see keep it coming :)

@DesignedandBuilt 25 күн бұрын

Cheers Aaron!!!!

@paulducrot7673 16 күн бұрын

Awesome work quality, design and build. The truck is epic as well 👌

@DesignedandBuilt 10 күн бұрын

Cheers Paul!

@Mavo1989 26 күн бұрын

its a damn hefty amount of work and engineering along with the CAD work certainly a killer bit of gear

@DesignedandBuilt 25 күн бұрын

Thanks mate!

@swbpajlife 27 күн бұрын

Looks awesome!!! Now you just have to remember that they're there when your driving around

@darrenmackenzie1645 27 күн бұрын

Yup. Don’t forget their on the back before pulling into the shed 😆😆

@tritonjackmam5.681 26 күн бұрын

easy just hav a sand flag on the bar

@archerrussell3022 27 күн бұрын

This thing is so bloody mint😍

@stephmo371 21 күн бұрын

i love builds like this. some design and full build process. this is the stuff that peacefully puts me to sleep.

@DesignedandBuilt 20 күн бұрын

Haha hopefully in a good way, and doesn't bore you too much!

@geofftuck7347 26 күн бұрын

Love the “percussive persuasion” to get the bike rack to match the tray. Are you sure your engineering background isn’t civil and not an automotive? 😂😂 Love your work Richard!

@DesignedandBuilt 25 күн бұрын

Haha cheers Geoff!

@kenanschoon8585 27 күн бұрын

Such a sick design, love watching it come more and more together in each episode 🤟🏽

@DesignedandBuilt 25 күн бұрын

Thanks Kenan!

@Glen000 19 күн бұрын

Very cool!

@tonycook2347 27 күн бұрын

Mate, that is mint. I can't wait to see the finished product.

@DesignedandBuilt 25 күн бұрын

Thanks Tony, neither can I!

@RyanJamesDougherty 22 күн бұрын

Hey Mate I Just want to say that I love the content and enjoy the indepth expanations. Cheers

@DesignedandBuilt 22 күн бұрын

Thanks Ryan! Glad you enjoy it :)

@kar428 23 күн бұрын

Wow. Well done

@DesignedandBuilt 22 күн бұрын

Thank you!

@MHP47 27 күн бұрын

Very cool. Come a long way from the previous video. Looks great though, thanks for the effort you put in to making the content for us, and can't wait to see what's in store next

@DesignedandBuilt 25 күн бұрын

Thanks for the support! Really appreciate it!

@jamesfischer5389 13 күн бұрын

OUTSTANDING!!! USA KTM Rider! ☮️

@DesignedandBuilt 10 күн бұрын

Thank you!!!!

@itsfromlawrence 27 күн бұрын

that is a fairly involved process that. Looks great, well done. Like your creativity and problem solving.

@DesignedandBuilt 25 күн бұрын

Cheers Lawrence :)

@tomcencic6260 25 күн бұрын

Amazing work mate, love this detailed content!!

@DesignedandBuilt 16 күн бұрын

Thanks Tom, glad you enjoy it!

@Doedoye 27 күн бұрын

Looks great mate!!

@DesignedandBuilt 25 күн бұрын

Thank you!

@peartreeranch 27 күн бұрын

Yea boy! Great work.

@DesignedandBuilt 25 күн бұрын

Thank you!

@ryanstewart8836 27 күн бұрын

Dude thats awesome!!

@DesignedandBuilt 25 күн бұрын

Cheers Ryan :)

@bodhisykes 25 күн бұрын

Love the video mate!

@cyclemoto8744 27 күн бұрын

Brilliant master Rich!

@DesignedandBuilt 25 күн бұрын

Thanks mate!

@erolmunur5879 26 күн бұрын

Looks great good job.

@DesignedandBuilt 25 күн бұрын

Cheers Erol!

@tayloradams1787 21 күн бұрын

Great work

@DesignedandBuilt 10 күн бұрын

Cheers Taylor!

@CarlMarx 27 күн бұрын

Looks sick!

@DesignedandBuilt 25 күн бұрын

Cheers Carl :)

@6226superhurricane 27 күн бұрын

have a look at bike binderz. i still think there's a major concern with low hanging branches etc.

@DesignedandBuilt 25 күн бұрын

People run mtbs on 4x4 roofs all the time and it would be a similar height.... Maybe a tall aerial at the front to remind you of the height. I'll have a look at the bike Binderz. Cheers!

@thomasfillery1919 27 күн бұрын

Great design content, especially when it doesn’t go to plan every time 👌🏼 keep it up Richard !

@DesignedandBuilt 25 күн бұрын

Cheers Thomas!

@mitchellholroyd2837 27 күн бұрын

Looks really good.

@DesignedandBuilt 25 күн бұрын

Cheers Mitchell :)

@nickunw 27 күн бұрын

Welding ASMR vibes 🔥🔥

@motionfactoryracing5914 25 күн бұрын

Epic build!

@DesignedandBuilt 25 күн бұрын

Thank you!

@donaldoyler2092 17 күн бұрын

That's cool

@stephenwalker8742 26 күн бұрын

Love watching you builds. I wish i had the talent and know-how

@DesignedandBuilt 25 күн бұрын

Cheers Stephen! You can always learn - gotta start someonewhere :)

@mbahmannz 25 күн бұрын

Awesome built ❤

@DesignedandBuilt 25 күн бұрын

Thank you!

@herve160181 26 күн бұрын

Bloody impressive.

@DesignedandBuilt 25 күн бұрын

Cheers mate!

@lukejenkins268 27 күн бұрын

Love it mate build so well looks amazing love your videos

@DesignedandBuilt 25 күн бұрын

Thanks Luke! glad you enjoy them!

@stuz32 10 күн бұрын

Great video mate, subscribed :-)

@BrotherLead 27 күн бұрын

Wow mate, just wow. You’re an absolute genius. Great work 👍

@DesignedandBuilt 25 күн бұрын

Thanks mate, kind words!!!

@andrewlangford88 27 күн бұрын

Boy can weld!

@DesignedandBuilt 25 күн бұрын

Cheers Andrew, I couldn't a few years ago! Plenty of practice haha

@699hazard 23 күн бұрын

Bloody Awesome build mate! Love 45s! Would have been cool to be able to have the back lift up on struts when no bikes are on it to be able to sleep in the back.

@DesignedandBuilt 10 күн бұрын

Haha love it, easy addition 🤣

@Fallat200 19 күн бұрын

Great 👌🌷 You are truly an engineer👍✌️🌹

@DesignedandBuilt 10 күн бұрын

Haha why thank you!

@RTPerry88 26 күн бұрын

When you're laser cutting anyway hex nutserts are a nice option for improved torque out resistance, might save you welding on some nuts. In Aus check out Huck Aerobolt, they do low quantity orders in zinc and stainless.

@DesignedandBuilt 25 күн бұрын

Cheers mate, haven't seen them before! They look very useful!

@dan79seriestoyota43 27 күн бұрын

Well done sir!

@DesignedandBuilt 25 күн бұрын

Thanks Dan :)

@terrymcneilly2222 23 күн бұрын

Looks like a “Cyber Trunk”!

@cnc75adventures49 27 күн бұрын

Awesome 👍👍

@DesignedandBuilt 25 күн бұрын

Thank you!

@West4ea 27 күн бұрын

Your work as always is outstanding! Good to see you included the fails so us mere mortals know it doesn't go right every time. Cant wait for the next stage

@DesignedandBuilt 25 күн бұрын

Hahahaha thanks mate!

@enduro-parts-aus 26 күн бұрын

Thats awesome

@DesignedandBuilt 25 күн бұрын

Thank you!

@87xfute 27 күн бұрын

Nice job Richard, well done mate. Seeya Rob

@DesignedandBuilt 25 күн бұрын

Cheers Rob

@wingyfilms6830 27 күн бұрын

Uncle richo stackin dimes once again 😉

@DesignedandBuilt 26 күн бұрын

Nothing better hahahaha

@memertmemes2586 21 күн бұрын

As someone who's driven jeeps of all kinds a lot, this thing definitely sways from all the weight up there. I really like the look but driving long distances would drive me mad.

@Team6Loves 11 күн бұрын

You could take this further and make it into a Flip out Camper. Basically a triangle inside a triangle, meshing together to be equal in size. Cantilevering over making a space to sleep.

@DesignedandBuilt 10 күн бұрын

Hahah love it!!! Now there’s a project

@johanessambuaga 23 күн бұрын

blown my mind

@DesignedandBuilt 10 күн бұрын

Haha thanks!

@AnselmWiercioch 25 күн бұрын

It's a low bar to look better than a cybertruck, but this thing turned out an absolute beaut. Nicely done.

@DesignedandBuilt 25 күн бұрын

🤣🤣🤣🤣

@mj.moreno 24 күн бұрын

Mad max

@posko76 23 күн бұрын

Hi Richard, have a look at "pitbull trs system" it might be a mounting bracket you could redesign for a dirt bike. Back wheel axle instead of foot pegs. Easier to reach, load and lock for one person.

@DesignedandBuilt 22 күн бұрын

Thanks mate, looks really good!

@elrud5964 13 күн бұрын

As soon as he started fully welding the headboard without going through and tacking it up I knew it was going to be out of square.

@DesignedandBuilt 10 күн бұрын

Live and learn eh 😂

@anthonymayes1340 27 күн бұрын

Love the new design it looks great. Looks to work awesome. I just want to see you test in on a Rough gravel road or something

@DesignedandBuilt 25 күн бұрын

Cheers Anthony, so do I 😆

@jessesimonyi-gindele7089 24 күн бұрын

Does aluminum not warp when welding? Nvm, I just had to keep watching.

@BordertotheShore 15 күн бұрын

Awesome 💯🇦🇺

@DesignedandBuilt 10 күн бұрын

Thank you!

@martijnjonkers2179 23 күн бұрын

My first reaction was, i dont care if it works cause it looks sick!

@DesignedandBuilt 10 күн бұрын

😂

@samcook2775 23 күн бұрын

You should explore using a through bolt to go into the foot pegs, look up Ultimate MX Hauler as an example. Rather than clamping, it would essentially bolt it to your canopy and make it more universal

@DesignedandBuilt 22 күн бұрын

Cheers Sam, looks like a good product!

@Leigh666XF 27 күн бұрын

Who knew a tig was a musical instrument?

@tritonjackmam5.681 26 күн бұрын

COOL BUILD 👍 ONE QUESTION DOES IT HAVE TO PASS ADR ?? AND HOW WILL IT GO IF 🤷‍♂️ YOU GET PULLED OVER AND THEY SAY THEY HAVE TO BE STRAPPED DOWN?? BECAUSE IT LAW THAT VEHICLES ON A FLAT BED HAVE TO BE STRAPPED DOWN ON ALL 4 WHEELS ?? 👍👍🇦🇺🇦🇺🇦🇺

@DesignedandBuilt 25 күн бұрын

No ADRs as far as I'm aware. As long as they aren't overhanging the car and they are below 4.3 metres which it is safely.

@jakemaughan3818 25 күн бұрын

For mounting the bikes you could always use or fab something up like bike binderz in the US

@DesignedandBuilt 25 күн бұрын

Cheers Jake, will have a look into them :)

@spencerbird6597 27 күн бұрын

Great video! There's a lot of design for manufacture aspects here that I think you did really well with. Very different build to other canopies. Is the Kincrome toolbox draw open to entries from new Zealand? Cheers

@DesignedandBuilt 25 күн бұрын

Hey Spencer, cheers for the kind words! Unfortunately not :( Maybe next time.

@aaron6050 25 күн бұрын

Great content! New sub!

@DesignedandBuilt 25 күн бұрын

Thanks Aaron!

@VaughanMunro-js4nr 26 күн бұрын

My main worry would be wiping the bikes out on a low clearance car park, drive through, or even a tree branch. Otherwise, it's a great idea.

@DesignedandBuilt 25 күн бұрын

Yeah agreed, In saying that though people run mtbs on 4x4 roofs all the time and it would be a similar height.... Maybe a tall aerial at the front to remind you of the height.

@adventurepaul 22 күн бұрын

Great build mate, care to share your Tig Welder setup and settings?? Please

@DesignedandBuilt 21 күн бұрын

Hey mate, generally 135-145 A and 100 HZ on the outside corners, insides 160+ A and 80 HZ

@RealHooksy 25 күн бұрын

That’s a pretty impressive build mate. Just a reminder to take the bikes off before you park your Toyota in the garage 😂👍🍻

@DesignedandBuilt 22 күн бұрын

🤣 For sure

@TimShup 21 күн бұрын

Bada$$❤

@motas313131 26 күн бұрын

Use the winch cable to clamp the pegs down once it hits the end of its travel

@DesignedandBuilt 25 күн бұрын

Yeah I like that suggestion, or even just making the foot peg holders pull the bike down on a wedged angle!

@raddeal1 27 күн бұрын

Subscribed

@DesignedandBuilt 25 күн бұрын

Thank you! Appreciate it.

@jimm3379 25 күн бұрын

Awesome build mate, you’re a talented bloke. Your vid makes me think of simple things we take for granted, like quick clamps and zip ties for that matter. BTW, have you ever tried T-REX adhesive? I rate it over Sikaflex.

@DesignedandBuilt 22 күн бұрын

Cheers Jim, no I haven't! I'll have to give it a go.

@BerkleyBuilds 17 күн бұрын

Great effort and nice idea. Think you over engineered it a bit, there are certainty simpler ways of doing it but this way is certainly very cool!

@DesignedandBuilt 16 күн бұрын

Thanks Berkly! How would you do it simpler?

@BerkleyBuilds 16 күн бұрын

@@DesignedandBuiltyou’ve clearly thought about it more than I have so my opinion really doesn’t matter. I’ll stick to building houses haha

@DesignedandBuilt 16 күн бұрын

@@BerkleyBuilds Haha I value good constructive critiscism, it makes it a better product overall!

@scottno3344 25 күн бұрын

Looks amazing. It seems really tall with the bikes mounted. Is height not an issue when you are galling the bikes?

@DesignedandBuilt 10 күн бұрын

My argument is people run bikes on a roof rack all the time!

@markpalmer3071 26 күн бұрын

Looks really good! Does that front mount only hold the wheel on a couple of tyres lugs?

@DesignedandBuilt 25 күн бұрын

Hey Mark, yes correct it does. But it also compresses the tyre and it seems to work really well.

@markpalmer3071 25 күн бұрын

@@DesignedandBuilt that’s great thanks!!

@lukechandler7447 22 күн бұрын

do you have a limit swich on the winch so it doesnt cause undue damage???

@DesignedandBuilt 10 күн бұрын

Not quite yet haha, good idea though.

@scottaubrey8392 27 күн бұрын

The foot peg holders could be a far simpler design. Just have metal rods with an angle on the them. As the foot pegs slide in and the bike gets pulled up, the metal will hit the pegs and clamp them down…if that makes sense?!

@DesignedandBuilt 25 күн бұрын

Yep I get you! They would need a lock of some sort but I like it!

@tigerscott9788 27 күн бұрын

Looks like a crazy expensive motorbike trailer to me😳

@DesignedandBuilt 25 күн бұрын

Raw materials are pretty cheap! Although a moto trailer would have been easier 🤣 Unfortunately I don't have the space.

@samgilkison5481 22 күн бұрын

Seen this driving down the bruce the other day im sure of it

@DesignedandBuilt 10 күн бұрын

I was up there last year!

@stevebonczyk3795 27 күн бұрын

great fabrication. I dont even own a motorcycle and I want this build.

@DesignedandBuilt 25 күн бұрын

Hahaha, cheers Steve!

@rangabanga32 19 күн бұрын

youre neighbours must have loved you that weekend.lol

@DesignedandBuilt 19 күн бұрын

@@rangabanga32 in regards to all the banging and welding? 🤣

@10mwtp 26 күн бұрын

Hahaha I suggested the Ballards tyre holder!! Fucking awesome to see!

@DesignedandBuilt 25 күн бұрын

Cheers for the suggestion mate, was a ripper!

@stuartlockhart-lt6iv 22 күн бұрын

since the front wheel is locked in place why don't you replace the footpeg latches with a simpler ratchet around the bottom of the rear wheel holding it forward and down? It means you don't need to climb up to engage the lock too.

@DesignedandBuilt 22 күн бұрын

Cheers Stuart, good idea!