Designing A Celtic Knot In Lightburn
Рет қаралды 3,113
Күн бұрын👉👉👉Click on Show More for video mentions and special links!👈👈👈
👉👉👉
This video shows me in detail designing a Celtic Knot in Lightburn. Not one design. But three different versions. I also show how to use that design to then make an earring using that design. There are going to be a lot of people that watch the first 8 minutes or so and struggle to replicate this design. To keep from struggling and banging your head, watch this straight through. The go and duplicate the process. Once you know why I do the things I do, this is extremely easy to replicate.
================================
Video Mentions:
patreon.com/hobowithwood
hobowithwood.com
===================================
Use the link below to get your Monport CO2 and save an additional 6%.
Monport Lasers:
hobowithwood.com/monport
Use Coupon code:
👉 Hobo6 👈
For a 6% discount on all lasers!
===================================
COOL LINKS:
Any level of support would be greatly appreciated.
Monthly Options
/ hobowithwood
One Time Donations
www.paypal.me/youtubehobo
Super Cool Workbench:
hobowithwood.com/VevorWorkbench
Stainless Steel Shelving Unit:
hobowithwood.com/VevorStainle...
This is a link to the Atomstack website:
hobowithwood.com/Atomstack
ATOMSTACK P9 M40 - A Great Small Laser!
hobowithwood.com/AtomstackP9
Comgrow Comgo Z1 The Ultimate Package
hobowithwood.com/ComgrowZ1Ult...
Comgrow Desktop Laser Engraver Enclosure
hobowithwood.com/ComgrowDeskt...
Perfect paper for cutting with your laser.
Hammermill Cardstock, Premium Color Copy, 32 lb, 11" x 17"-1 Pack (250 Sheets) - 100 Bright, Made in the USA Card Stock, 120024R
hobowithwood.com/80lbCardstock
Clock Mechanism link
hobowithwood.com/ClockMech
2.5" Dice Blanks
hobowithwood.com/diceblanks
Baltic Birch Plywood, 3 mm 12" x 12"
hobowithwood.com/3mmBalticBirch
1/16" Basswood 12" x 12"
hobowithwood.com/ThinBasswood
===================================
Some of these links are affiliate links, but will not cost you a penny more!
Using them helps to support the channel!
#lightburn #lightburn software #hobo with wood #laser engraver
@DavidDunster 6 ай бұрын
I was able to do these today, a work of all places, not the hobby room. Thank you for showing how it is done. Now to figure out what to do with them :) 😆
@HoboWithWood 6 ай бұрын
Have fun!
@TheLouisianaHobbyGuy Жыл бұрын
Finally getting caught up and got a chance to watch... long, but worth watching!
@terrydriskel9731 Жыл бұрын
Hi Steve. Who cares about the length of the video. You have an awesome way of getting the ideas across. Keep it up
@jodidonovan3191 11 ай бұрын
WOW!! Fantastic !! I love how you walk us thru everything step by step. I am new at this and would not have even begun to know where to start without your videos !!! Thank you
@HoboWithWood 11 ай бұрын
Glad it was helpful!
@merrillalbury8214 Жыл бұрын
Who cares how long it is. It was great. Thanks.
@HoboWithWood Жыл бұрын
Believe me Carl, they care. I appreciate your kind words. But in today's world, if they don't get it in 10-12 minutes, they check out. So far, the analytics for this video show that to be true. Very frustrating. Thanks for watching, hope you took something from it.
@merrillalbury8214 Жыл бұрын
I always learn new stuff from your videos. Even from the mistakes.
@TheMakersMarkTSF Жыл бұрын
I was so in to this video that I thought it was only about ten minutes. I love learning new things and do not mind the longer videos.
@minnesotamaker1846 Жыл бұрын
Fun video. Thanks!
@TimNudd0525 Жыл бұрын
Very well done, I really enjoyed it and learned a lot.....and I watched it all the way through lol Oh and I wouldn't have minded the California "hi sign" as an outro, I would have waved back grinning from ear to ear! 😂😂😂
@TheMakersMarkTSF Жыл бұрын
I did watch this video all the way through, (Twice), and still had to come back a couple of times. Thanks Steve, it was fun creating that design. I do not usually copy your designs but I really liked this one. I am going to send you some biscuit money!
@HoboWithWood Жыл бұрын
You are always welcome to copy my designs. Any design I have on hobowithwood.com that you don't feel like copying and decide to buy instead, you are welcome to make and sell those as much and as often as you like. I hope to find someone that is able to make a million dollars off one or more of my designs and they simply keep me in biscuits.
@TheMakersMarkTSF Жыл бұрын
@@HoboWithWood Making a Million dollars sounds like too much work, I do this for fun! Enjoy the biscuit.
@jfonly Жыл бұрын
I really enjoyed it and learned a lot. Thank you!
@stevespringer8385 Жыл бұрын
Nice job Steve! Thanks much.
@suncentaur 3 ай бұрын
This worked really well the first time. Now everytime I get so far, the nodes go away, usually around the time I group each pair of circles. At that point I can't get them back. What am I doing wrong? Yeah, they are going away as soon as I group them. Not sure why I got away with it the first time but now I can't do it again. I keep watching the video step by step to see if I'm missing something.
@craigviera2343 Жыл бұрын
I’ve watched your video on creating Celtic Knots (as usual very informative). When creating nodes around an ellipse, I understand setting the offset distance to zero (0) to duplicate an ellipse so the nodes encircle the object. My question, is there a way to create rectangles with nodes that encompass the entire rectangle?
@HoboWithWood Жыл бұрын
Not that I am aware of. A node is inserted when the design requires a curve. Since the square/rectangular shapes have no curves, you get four nodes.
@Revsut 7 ай бұрын
I can't get edit nodes to work. I've been trying for the last half hour. Using Lightburn 1.4.04. Has the method changed? I duplicate each circle, do the circular array just fine, node edit doesn't show all the nodes and won't let me delete the outer portions of the rings. Recently found your channel and apologize for reviving an old discussion. Thank you!
@HoboWithWood 7 ай бұрын
You have to convert the circles to paths. You won't see the nodes of circles. Select the image. Go into the edit menu. Choose convert to path. Your nodes will appear. I also just did a video on how to use the undo feature while in node editing that is worth the watch if you use node editing a lot.
@russellgates254 Жыл бұрын
I have tried 5 times following you step by step to do this and every time somewhere in the duplication and pairing process my nodes go away and i can't get them back what the hell am i doing wrong?
@HoboWithWood Жыл бұрын
make sure everything is ungrouped. when you create offsets of a pair or more, the resulting offsets are grouped. immediately after creating the offset, while it is still selected, ungroup everything. you will not see nodes of a selected group. you can see the nodes of multiple shapes, but not if they are in a group. try that.
@grantscouten4267 Жыл бұрын
Hey Steve, is there a reason you don’t simplify your offsets?
@TheMakersMarkTSF Жыл бұрын
A simple offset for a circle would be four nodes, that is what you are trying to avoid.
@HoboWithWood Жыл бұрын
Yeah, I'm not sure what you mean when you say "simplify your offsets", but try it your way and let me know if it works. But like @MySpotintheWoods says, avoiding a simple circle is the goal. It's been my experience that the trim feature in node editing doesn't work that well with primitive shapes. I demonstrated that in the video. But I hardly ever have a problem with trimming offsets.
@teresa6775 Жыл бұрын
I completely appreciate the detailed instruction and trust me, I need it. BUT...is there a reason you can't just import the picture you're wanting instead of re-creating it piece by piece ? FYI...If people don't like the length/time of a video, they can speed it up, but I like the choice and enjoy learning.
@HoboWithWood Жыл бұрын
A couple of reasons for doing this are, 1.) It's as much about learning the techniques used in the video. And 2.) If someone traces the The Starry Night, would they be considered Vincent van Gough's equal? Mainly, since I'm selling a lot of my designs, I don't feel right about selling others' work. Plus, I really love looking at designs and figuring out how to use the tools in Lightburn to recreate them. Many will not find recreating the knot a useless ability. But the trim function is a new arrow in their quiver they will use often. Thanks for watching.
@thomassimpson1663 Жыл бұрын
hey Steve, are you in Gastonia, NC? Sent you an email.
@teresa6775 Жыл бұрын
"They've" stolen many symbols and turned them into something ugly and negative. Intention is everything. Let the mind controlled do their thing and you keep making great designs. I do have one request though, could you maybe change your curser to something alittle more easier to follow? When you move it to click on something, it blends in with the rest of the black/white screen and by the time I've backed the video up and slowed it down to see what you clicked on....you've moved on and are about 4 steps ahead 😂. Just a request, but I'll survive if you don't
Cool Items Official
Рет қаралды 50 МЛН
Simply Woodworking
Рет қаралды 9 М.