Designing and 3D Printing Custom Parts for the FCX10 K5 Blazer! 🔥 Interior + Center Caps

Рет қаралды 2,027

3 ай бұрын

The FCX10 Blazer is back! As great of rig as it is right out of the box, a few 3D printed details really put the icing on the cake. In this video I showcase the parts that I've designed specifically for this truck, including a much needed interior. As always the creation of these parts was a lot of fun, and I'm loving how the truck looks since these new parts were added. If you're looking to add a bit more detail to your Blazer, certainly give these parts some consideration.
Full review of the FCX10 K5 Blazer: • FMS Built a Bigger Bla...
Mods for the FMS FJ40: • You Can Have a Killer ...
Make It RC Rear View Mirror (large, left hand drive used in video): shop.makeitrc.com/collections...
Make It RC Steering Wheel (40mm size used in video, print files available for RC Nerd Tier and above Patreon members): shop.makeitrc.com/collections...
Easier to 3D print interior and center caps STL files (available to Maker Tier and above members): / easier-to-3d-and-10312...
Higher detail interior and center caps STL files (available to RC Nerd Tier and above members): / 3d-printable-and-10312...
Check out ‪@TheShopMiniRC‬ for some more great RC content. 👍
Subscribe for more videos and follow us on social media for more frequent updates and extra content.
_________________________________________________________________
Website: www.makeitrc.com
Patreon: / makeitrc
Facebook: / make-it-rc
X: / make_it_rc
Instagram: / makeitrc
_________________________________________________________________
#rccrawler #fmsmodel #rc

Пікірлер: 21

@MakeItRC 3 ай бұрын

A very fun project that IMO really helps complete the look of this Blazer. Wonder how well that interior would scale down to fit in the FCX24 Blazer.🤔 As always thanks for watching and have a great weekend. 👍

@DarkDragonWing 3 ай бұрын

Very nice, very detailed! 🔥🔥🔥

@MakeItRC 2 ай бұрын

Thank you! 👍

@Robert-ni6ut 3 ай бұрын

Nice k5 intearer just love the make it rc decal on the glove box nice touch 👍

@andyrichey1192 Ай бұрын

Yeah, interior I need one for my K5. That’s awesome dude.

@TheShopMiniRC 3 ай бұрын

Huge thanks for the shout out!!!!!

@MakeItRC 3 ай бұрын

You do great work! Looking forward to seeing your K5 build. 👍

@alanq64 3 ай бұрын

This is great. Think I'm gonna use my resin printer for the better detail. Too bad it doesn't have a detailed engine bay. (hint,hint)😁

@andyrichey1192 Ай бұрын

If so, I’ll take two😁👍👍

@andyrichey1192 Ай бұрын

Are you going to be selling the interiors fully built?

@garybeckwith9045 2 ай бұрын

Sir. I am using Creality

@MikeMcclenithan 20 күн бұрын

I'd pay you good money for an assembled interior, am old and have arthritis issues which effect assembling and such. But I can still drive my Chevy FCX10 and would love to make it look better.

@derrickjohnson7309 9 күн бұрын

Hey I’m very interested in the 3d printed interior, please give me pricing and availability thank you ☺️

@garybeckwith9045 2 ай бұрын

Sir. I am using Creality Ender 3 V2 with Prusa slicer. I've done a couple of tub prints both supported and not. Could you please recommend proper support settings? Thank you.

@MakeItRC 2 ай бұрын

Certainly. I would suggest using supports for any overhangs. I tend to only add supports towards the outer edges on the dash and the front slot that the Velcro support fits into. This makes removing the supports much easier, especially under the dash. As far as the support settings, that will depend on your printer and material. I've found 25-30% support density to work just fine when printing on a Creality K1. A little work with a knife and sanding may be required but it came out looking pretty good. Hope that info is helpful, let me know if you have any more questions.

@shelbycobra1580 2 ай бұрын

Me venderias el archivo ?

@CenReaper. Ай бұрын

Where is that cheap blue RC pickup that you bought for like 240$?

@MakeItRC Ай бұрын

The 4Runner? I've still got it. I've done some work on it recently, last time it was in a video was this one I filmed at Beat The Creek 2024: kzfaq.info/get/bejne/q75knLZ4rc62j4U.html

@garybeckwith9045 3 ай бұрын

I can't make out the location of the STLs. Will you please spell it out here? Ty!

@MakeItRC 3 ай бұрын

I'm away from my computer right now but the links to Patreon should be in the description just below the video. Choose which version you would like. When you're on Patreon you'll see download links for the .zip files towards the bottom of the page. You do need to be a member if you are not already to access the files. The support from our members is what funds these videos and STL files. $3USD minimum gets you access to most of our files, including the easy print version of this interior. I hope this information is helpful. 👍

@robertharvey531 2 ай бұрын

How much would you sell this interior for already printed?