Рет қаралды 30,012
Drilling to depth on the Taig Lathe with the tailstock, center drills, twist drills, and a trick for quickly setting the drilling depth by registering off of the carriage. In this demo, a 3/8" hole is drilled on center to a depth of 1/2". There is a nice jam that shows what can go wrong and a trick for a quick way to locate the tailstock for drilling to specific depths with the lever action tailstock.
Using these links helps support this channel!
HSS Twist Drills: amzn.to/2xfaTTc
Center drills: amzn.to/2xftLlb
6 inch rule: amzn.to/2ymAfDB
Main Camera: amzn.to/2wXAXqU
Lapel Mic: amzn.to/2xRyH1x
Lathe: desktoplathes.com/product-cat...