I think people love working with you. You are relaxed and you keep things under control. Nice work Austin.

77 year welder with 56 years welder/fabricator just enjoy watching you work ! Keep it up .

Never thought I’d look at fencing as art. Beautiful.

I got my start welding in the Navy, doing plate and pipe welding on SSBN submarines. I gave it up for firefighting after I got out, but I’m still a welder/fitter at heart. Love your videos bro.

I made a corral many years ago from oil field pipe. (Bartlesville, OK) The posts were 2-7/8 tubing and the rails were 2-3/8. Rather than create saddles on the rails, I cut a bunch of one foot 2-7/8 pieces (w/chop saw) in the shop then split them in half by creating saddles. The 2-3/8 rails were flush cut to the approximate length. The 2-3/8 fit inside the 2-7/8 saddle pieces and it made the fitting and welding a lot easier. Saved a lot of measuring and grinding.

I have been a welder for 25+ years even taught at the community college here and I enjoy watching your videos. Keep up the great work and it's nice to see someone who loves what they do and is happy to share their tricks with others!!

When building pens, I use spring loaded latches installed on the gate in the same manner. You can get by without using the catch on the post side if the pipe is a good diameter say 3 1/2" or 4 1/2". I smash a small piece of pipe into an oval for clearance up and down, cap inside with 1/8" to keep hornets out, recess it in upright, weld around outer portion, and grind flat to the big pipe. Saves money by not buying catch side and leaves it looking super clean. Love your vids, I always learn something useful!

Awesome videos Ross. I’ve currently been working on building pipe fence at our ranch and definitely using this design for man gates throughout the property C’mon!✍🏼

Great finish on the fencing Austin, you both did a good job and it turned out fantastic. Thanks for sharing with us, Fred.

That’s a good looking fence dude.

Let me tell u this , I am a structural welder ,have nothing to do with wut u do but I learn way too much watching u videos , thank u soo much and good bless you

That was pretty cool just needed a little more of a close up picture of the slam gate latch

Gotta say your videos & teaching style is a real pleasure to watch, Austin. And my wife got me your soapstone & brass holder for last Christmas--it's great. Thank you for all you do for all of us!

Like your jack set up, made one years ago for the department I worked In. I would have primed pipe before installing.

Nice jacks buddy. Yes I did learn something and I’m old school.

Good morning Austin. I am not sure if your read these comments but I just gota say I love to watch your work. You are very very talented. And you calmly explain what your doing. I am not a welder but always wanted too. My son did take up the craft and he is learning everyday. Anyways I will keep watching.

You have an awesome teaching style man. Glad you’re doing courses now.

I like the lil cap plates

Yeah, looks great.

I'm surprised you don't use the green laser tape measures. I use them anytime I need to fabricate fence panels, or anything that needs to sit in-between 2 objects. They are insanely efficient, reliable, and eliminate the need for a 2nd hand for measurements in most cases. They're especially nice on really long runs where a tape will bend/ bow and not give you a dead nuts measurement. Maybe one day you can try them out, the future is here :D

Nice work Austin. One option for bolting the tubing to the masonry would be to drill holes in the brick and epoxy all thread into the holes.

Thanks for the great content, been learning a lot these past couple of weeks from your channel

Te he descubierto hoy y amo tu canal, tu estilo, como enseñas es genial 👏

Great job Austin , clean job 👍🏼👍🏼👍🏼

Love your videos 👍 you inspired me to become a welder ❤

Great work! I’m an amateur and usually only work on my own stuff and love learning other techniques. On those long gates and single strap hinges, I’ve had several of them crack and break welds under the weight and working pressure. I like to add a second strap welded to the side of the tubing part of the hinge and the gate post. Helps add an lot more strength, especially on the longer gates.

Great skills good to see diligent attention to detail. Watching from Ross Tasmania

Awesome as always Austin

Nice looking fence and gates.

Always looking so spiffy with those work shirts👍🏽 I try to do the same. But yours are so crisp

Amazing work

Great video! Nice job! Keep up the good work! 👌👍

ONE HELL OF A NAME THERE DAKOTA!!

Great job as always

still looking clean as a heck brother.

Great job fellas!

We made self closing access point gates using angles cuts on pipe similar to what is in the slam gate latch. I’d rather use the epoxy in place bolts with concrete.

Nice work. Love your attention to detail. The slam latches are great for cattle corrals. If you throw the gate hard enough, it will skip past the latch - which can be helpful when working cattle. Curious why you hung the last gate lower than fence height, which essentially makes the entire fence that height.

Looks good Austin

clean job

One additional method, to put ing brackets on brick is to use the kit we’re you drill a hole and put a plastic socket in to the brick to-accept the screw . I find they don’t crack the brick or cement block because the plastic gives a little and wedges the screw in place.

Thanks for the tape measure quirk

Very good Video 👍👍👍

We are based in the UK & would have pre-fabricated all of these sections/panels & sent them away for galvanising (& possibly powder coating) in bolt together/portal format, rather than weld the whole installation on site! What coating is the client going to put on this metal work? those gate hinges seemed tight enough in the video, give them a couple of months of exposure to rain & oxygen & they are going to get even tighter. ive never seen panel work in a residential or commercial way done like this before. very interesting. Cheers, Louis

I’ve been doing some searching for ideas on getting my property fenced up, so glad I found this! My boy can’t reach over the fence to get to current latch. It won’t be as pretty when I hack one together, but that’s slick Then I see you’re an Okie! Even better. We have run some of the same roads no doubt. I used to work for Stillwater Fire ages ago. Looking forward to the rest of the channel!

Love your videos brother! Do you have a video about building the gate jacks?

Good Job bro Greetings,

Inspiration!

You never fasten a post to a house if it’s in the ground. The ground moves at different rate then the house/foundation. Here in Canada if you do that all the bricks will be destroyed when the frost/thaw happens.

Great video! I'm curious why you didn't just run the fencing around the outside of the corner post instead of dealing with the hassle of the stretch bar. Is it harder or less secure?

I’m going to steal that jack idea from you bud.

Austin, do you ever do anything special when hanging longer gates off a line post to prevent the weight of the gate from bending the post when open?

Did you build you clamp for the field fence? I like that design.

You’re welcome!! Thank your for a very VERY easy to use website. Never been able to use Apple Pay like that on a website and in my opinion well priced. I laughed so hard a few times at this video I woke my girlfriend up😂

Thank you! COM ON !!!

Hey I use 1×1 angle with a piece of 1×1 square stock. Sandwich and bolted with wing nuts. Then attach with a chainlink stretcher. one even pull that way. Pretty much samething you had just thinner to be able ro hook with chainlink stretcher.

Use fire blankets to help protect the customers concrete.

That’s a slick looking fence! I’d love to get into that more, but used pipe is hard to come by around me (for a decent price at least)

Nice latch is there anyway to hide it inside the pipe for a cleaner look?

Great video, What king of fence wire is that?

JOE EVEREST SENT ME!

You ever use a portaband to cut your pipe instead of the torch? We did 50 sticks, cut both ends off with one 6.0AH battery.

Nice looking fence project. Do any of your customers ever paint their fences?

I enjoy your videos, but with this one, I wish you would've had the camera closer either while welding up the fence and gates or showed the finished work a bit more. I'm a visual learner, and it would have been nice to see what you did a little better. Otherwise I got the jist of how you did tge slam gate latch. Great idea.

Just need some Austin abs kayla content...

Looks great Austin. Where’d you find the wire panels for it?

When will you have your Heather gray 3xxxl hoodies in.

Man how far are you from celeste tx I know your in Oklahoma I’ve been wanting some tips on combo welding didn’t know if you’d be willing to do in person teaching

Curious as to where you purchased the slam latches

Have you considered getting a portable plasma cutter

He said!!!!! Watch the bubble boi!!!!!!

Great video Austin. Something to consider; the slam latch was placed under the horizontal rail of the gate which should be fine; however, the welded wire panel was added to the gate later requiring the person operating the gate to have to reach over the rail/panel to grab the slam latch handle. Placement of the latch above the horizontal pipe member would result in use of the latch to be more user friendly since doesn't have the pipe or panel as an obstacle to reaching the latch handle. Just something to consider for future slam latch installs. Thanks Again, Austin!

Hello Austin how can I purchase one of those pre made gates?

How did you do the slam latch?

So have you always had your business? Or were you a pipe fitter or in the union previously?

Where do you find your pipe? I’m having trouble finding it

Have you got a diagram of that latch I need to fix one just like it.

I wouldn't tie into the brick like that because usually not a part of the house plus brick is too soft and screws and anchors usually don't hold. Whenever possible screw into the stud.

Austin building a sliding steal frame with wooden pickets don't want to screw my wooden picket on the steal frame do you think this could work if I use 2x4 across with weld bracket holding the 2x4 then but my picket fence with wooden screws

Where did you get your stands from

how much does a job this size cost to do(to the owner) approximately

Bon Boulo😀😀

Where do you find those spring loaded slam latches?

😮

I know drill stim is cheep, looks good on the outside rust out from the inside. That's why I would never use it for fence

Can I get Info on the gate latch please

Hi Austin, I had messaged you on Instagram but I don’t know if you saw it. I am trying to apply for the pipe fence scholarship but the page isn’t working. I was hoping I could figure out what is going wrong so I can apply before the enrollment period is over. Thanks, Bill

Hi are those gate stands you use bought or h made ? Any more information on those thanks

👍👍

👍👍👍

Have you got a link to the welding helmet/hood you use/recommend? I am going to start welding as an old man, you do use an auto darkening one? How fast must it auto darken?

Anyone know of a way to stop an auto darkening 2x4 lens to not darken when grinding? I’ve tried dots on the clear lens over the sensor but I still can’t get it to work.

I have to ask, how is gates and fence a thing

This fence is what I’m looking for!! Looks great. How much would this run me to fence in 1 Acre like this?

That’s a bada$$ fence.. what do you think the life expectancy is on it?

Dakota looks very familiar If yall are from around stillwater oklahoma area i think thats where i know him from

dont go past chemical anchors ,,, they are way way better than you would imagine , and they wont split bricks

I’m no Psychiatrist but I am damn sure Dakota doesn’t have ADHD