No video
Dethroned, but still in the top! Bosch GSB 18V-110C Brushless Cordless Combi Drill Driver
Рет қаралды 23,839
Күн бұрынSee more information and technical specifications about Bosch GSB 18V-110C Brushless Cordless Combi Drill Driver:
The most important data:
Torque (max)*
110 Nm
Torque (soft/hard/max.)*
47/85/110 Nm
No-load speed (1st gear / 2nd gear)*
0 - 480 / 0 - 2,100 rpm
Battery type
Lithium-ion
Max. impact rate*
31,500 bpm
Chuck capacity, min./max.
1.5 / 13 mm
Battery voltage
18.0 V
Weight excl. battery*
1.9 kg
Torque settings
25+2
Drilling diameter
Max. drilling diameter in wood
82 mm
Max. drilling diameter in steel
13 mm
Max. drilling diameter in masonry
16 mm
Screw diameter
Max. screw diameter
12 mm
Total vibration values (Drilling in metal)
Vibration emission value ah
2.5 m/s²
Uncertainty K
1.5 m/s²
Total vibration values (Impact drilling in masonry)
Vibration emission value ah
15.5 m/s²
Uncertainty K
1.5 m/s²
Noise/vibration information
Sound pressure level
87 dB(A)
Sound power level
98 dB(A)
Uncertainty K
3 dB
Hello there, on this channel we share with you various tests and demonstrations with power tools, accessories for power tools and other types of construction tools. We hope that these video materials will help you get an idea of how a certain tool you are interested in, looks in reality and behaves at work. So if you like this topic, we already consider you a subscriber!
Contact ➜ See the "About" section of the channel
#ToolTest #BoschProfessional
@JB-ot9hi 11 ай бұрын
Still one damn good drill
@leswhite3465 11 ай бұрын
I’d use an impact for this type of screw. Saves the wrenching of the arm. Great for drilling through joists though.
@dragogranic8171 Жыл бұрын
I have the same model. It is a different tool with procore batteries. But for the most of my jobs i don't use the procore batteries on this drill, it doesn't need it. I just tried it to see how does it handle.
@CJ_191 Жыл бұрын
How is the SDS setting on this drill ? I'm thinking of getting this drill and won't have to carry a Combi & a SDS
@dragogranic8171 Жыл бұрын
@@CJ_191 This drill does not have sds head atachment. If you are doing light jobs in brick and marter, then it is ok on smaller size drill bit, it is even ok for drilling ceramic tiles. Anything bigger, you need to have sds drilling machine, especially if you are drilling multiple holes in hard concrete.
@CJ_191 Жыл бұрын
@Drago Granić thanks 👍
@dragogranic8171 Жыл бұрын
@@CJ_191 👍
@luisinhoens90 2 жыл бұрын
just wondering how does it stack up against the newest 150Nm version. That thing is a beast
@GabrielKozsar Жыл бұрын
I miss drilling into concrete :( with 5-6-8-10mm
@ToolTest Жыл бұрын
Not a fan of drilling in concrete with this type of tool.
@GabrielKozsar Жыл бұрын
@@ToolTest i drill a lot 5-6-8 mm holes for Fischer DuoPower. Cameras,conduits,etc from ladder. Can the 18V-110 handle it? I am tired of the corded bigboy hammer drill , i need something cordless and compact. I know it doesnt have the Joules but how does it handle it.
@QuockhanhPham20 Жыл бұрын
with 5 and 6 that still can drill but up to 8 and 10 drill into concrete that not a good things vibration from drill very large and the drill job won't comfortable cause you have to push so hard so it can drill into concrete If you need drill on concrete you can think about some cordless compact Rotary hammer drill There are some option from Bosch GBH 180 Li Brushed/Brusless Makita DHR171 And 182 Dewalt Dch172 Hilti Nuron Also Have but i don't know much
@GabrielKozsar Жыл бұрын
@@QuockhanhPham20 I think I am going to choose the 18V-60 FC with the SDS attachment (1Joule hammer). Compact and versatile lighter/smaller than then 18V-110
@QuockhanhPham20 Жыл бұрын
@@GabrielKozsar That also a nice option not as much powerfull as the other model but still ok
@dusanmilojevic3017 Жыл бұрын
Use pro-core batteries (not slim one’s) for maximum power.
@ToolTest Жыл бұрын
When I filmed this video, the ProCore batteries had not even appeared
@engineer_alv Жыл бұрын
@@ToolTest I have owned 4Ah CORE batteries for a couple years, they are not new. The 8Ah CORE batteries have also been available for a while. It's just the 12Ah batteries the ones that are only 1-2 years old at this point.
@ToolTest Жыл бұрын
@@engineer_alv It probably depends on the country, I repeat, when I filmed this video (not when I posted it, but when I filmed it), I don't even think that ProCore batteries had appeared, at least not in my country. Beyond that, I don't understand why people make such a fuss about the batteries I used, it's not like GBA batteries disappeared from the market.
@tomasnovacek1533 22 сағат бұрын
but you wear green hobby gloves - its like driving BMW in opel gloves :D :D Blue gloves professional next time! (just kidding)
@gianlucacapretti4630 Жыл бұрын
Il top...
@HnrPram 11 ай бұрын
How long the batery could provide the power?
@ToolTest 11 ай бұрын
Until it consumes all the power in it.
@HnrPram 11 ай бұрын
@@ToolTest absolutely 😂🤣😂
@ToolTest 11 ай бұрын
@@HnrPram It depends on many factors. What type of battery is it, GBA or ProCore, what is its capacity, how is the battery maintained and charged, with what type of charger, in what load is it used, etc., etc. It can last a whole day when screwed with 2mm screws, or it can be discharged after two holes in wood with a 30x400mm drill. So I have no way to answer exactly to such a question.
@HnrPram 11 ай бұрын
@@ToolTest thank you for giving the explaination 👌🏼😁
@attilabereczki5681 Жыл бұрын
the 85c and the 110c same model?
@ToolTest Жыл бұрын
No, 85C has 85Nm, 110C, 110Nm
@attilabereczki5681 Жыл бұрын
@@ToolTest thank you!
@gay25gay25 Жыл бұрын
Auschus 🤣🤣🤣
@gianlucacapretti4630 Жыл бұрын
Ci stai tirando il collo....quando si lavora,si fora avanti o sitinge la punta nel grasso...
@ToolTest Жыл бұрын
Probabilmente stai affrontando un'illusione ottica.
@gianlucacapretti4630 Жыл бұрын
@@ToolTest in che senso?......
@ToolTest Жыл бұрын
Forse non ho capito bene. Cosa intendi con: "Ci stai tirando il collo"? La preforatura o l'ingrassaggio delle viti viene eseguita nel legno duro, in modo da non rompere le viti o le punte e non forzare l'utensile. Nel caso in questione è una prova di forza, vogliamo vedere come si comporta la macchina, non siamo in una vera situazione lavorativa.
@gianlucacapretti4630 5 ай бұрын
@@ToolTestanche nell'abete ci si fora avanti....sforzi meno il trapano e la vite che va giù....😊
奧特羅羅 Ultraman
Рет қаралды 6 МЛН
The Honest Carpenter
Рет қаралды 2,5 МЛН
Tool Test
Рет қаралды 4,2 МЛН
Project Farm
Рет қаралды 4,1 МЛН
Torque Test Channel
Рет қаралды 275 М.