Thanks to all that voted on today's post relating to what tool brand they wanted to see today

Keeping us updated on the yellow tools, and putting your life on the line again. Clint you are a trooper 😁

Been waiting for these for years! Can’t wait to pick them up!!

These tools aren't "real niace likeee." These tools are "extraordinarily niace likeee!" Great video man, glad to see these tools in action, drywaller by trade, can't wait to get my hands on these beauties.

Alright Dewalt comes through again. Thank you for the information!

Stellar job Flint! These tools look amazing!

These were some much needed upgrades. I love these

I have been looking forward for the new screw gun. Now I need it great video!!

My brother thanks for the drywall screw tool video. Was actually looking at them . And the Dewalto-zip looks schweet!!! And after my wife saw the big green vac video, she added to the list.. keep up the good work .

I love the cruise control option

The tool-less bit change seems very handy. I hate that I always have to worry that I’ll lose the wrench for my Ryobi cut out tool. The auto mode on the screw gun is pretty sweet too.

I have the old screw gun and and really glad the next is here. Love the button style modes..withbuilt in clip. You can fly pretty good with that..slide into a tape holder..use the auto feed attachment and maybe extender

Them Modes are Real Nasss Like Love the Press Actuation like a Nailer Clint @Tool Review Zone

I would love to get these. They would help out a lot with the room I am renovating. Thanks for the content!

will be getting that screwer tool thank you for info stay safe buddy

Great up grades really will help at the job getting it done efficiently and fast 💨

Your comedy is top notch and appreciated much . 😄👍

Some fine tool review right theya

I recently picked up the Hercules drywall cutout tool, and apart from the placement of the on-off switch, it's identical.

PEOPLE KNOCK DEWALT... however, dewalt 20v brushless are the only tools that I buy. I've got both you're reviewing as well as about 25 more. Love my DeWalt!!! You got a new subscriber.

Very nice for the next gen. I retired - may have to go back to work with those!!

Sooooo glad I chose team yellow .

That drywall screwer tool is shaped exactly like the first cordless drill I ever owned. A 1993 craftsman 9.6. I thought it was the sexiest looking tool ever made. I used it to drill holes in my truck bed to make a ladder rack. Stripped all of the clutch settings within a week. It still looked great in my mom’s basement for years afterwards though.

Time for some high octane Coffee my friend we doing good down in the South.

I dont do drywall but that drill seems nice! Great video!

love the puns and dad jokes mate, cheers for the great videos

My house actually has the old 2’ wide sheets of plasterboard and nice thick layer of plaster. Maybe one dah I’ll switch it over to drywall. Probably not though

About damn time DeWalt …. Thanks brother Clint 🇺🇸👊🏼🔨🪚👊🏼🇺🇸

When the tool makes you want to do the work😅. Doing drywall by yourself can get boring real fast but with that ScrewGUM it just got fun💪

Toolless bit change cutout tool is awesome. The screw gun is pretty sweet too. Love how you dont have to press the trigger to zip in the screws. But thr other mode where it judt dtays running is kinda pointless. Its doing the same thing as the triggerless mode but using way more bat tray juices.

Handy tool gonna get one

Yeah bit the paper is ripping out on every screw. What about hanging ceilings? Best practices are to not have the paper rip out, that is part of the strength so you need to get the torque corrected so that the screw heads sink in far anough to be flat, (slight indent) but NOT ripping out the paper.

I ordered a Milwaukee drywall screw gun on Sunday, I wish I had known about that DeWalt drywall screw gun before I ordered the Milwaukee. Smeeesh that like button. 👀👉🏼 👍🏽

That's probably one of two tools that I still use that's corded and haven't went to battery powered.

Hey Clint that windage was 😨 scary but that dewalt is Real Nas Like!!

They need to do something to keep the screw from getting tipped to the side when starting them.

Man, that screw....er tool looks amazing

Does the cut-out tool only work on drywall or can be used on other material too?

What’s the purpose of the free-run, 4th mode?

Hey thanks for the review question can you do a review with the cutout tool with OSB around an electrical box of course you'll need to use a multi-bit thank you if you can

Hello! Wondering if the cut out tool can be used with a carving burr? TY

That video was real nice like.😀

Cool Clint 😎

Awesome video, you are hilarious!

Yo Clint! It's about high time Dewalt came out with this edition. Push drive, top mounted belt clip, and variable speed settings. Real nass like! Hopefully, they provide a rapid charger for the bat-rays within the kit. 🤷‍♂️ P.S. just call it a "drywall screwdriver." Done.

Maaan I wish I had that 6 months ago when I was doing a bunch of drywall 😑

First thing i hated about the 2nd gen was the switch change i was so used to the flicking motion it took me a awhile to get used to it.should've stayed with the old one for me besides that love the compact size i got excited about the auto mode but i find that the screw depth isnt the same even if its set to where u want it.the depth is fine if u switch back to mode 2.i had to replace the nose cone and the bit holder on mine after 5 months it was making a terrible screeching noise thought it was the bush bearings on the motor at first replaced the cone and bit holder everything's fine.i also really appreciate that u can still use the gen 1 nose cones on the 2nd gen. The new cut out tool is Definitely my new favorite tool dewalt finally answered my prayers and made them brushless. (WHY WEREN'T THEY BRUSHLESS!! For so long and also why didnt they make a pre-threaded hole for the first gen like the new 1 has for the belt clip?........idk but they did it now and i appreciate it good job dewalt👍

Am only hee because of his accent of being hee 😂 I couldn't stop laughing man

Sick.

5:59 The screw was tearing the paper each time.... "woohoo" ???

Digital just seems like something delicate that will break. I prefer mechanical over digital controls.

So you like this model better than the last model?

Let me know when there is a belt fed option

Drywall cut out Tool Link is broken in description Clint @Tool Review Zone

Real Nice like!

the only thing that sucks if u screw without backing by accident its annoying to switch the modes fast to take out the screw other than that its lighter and the new mode is cool. (ive obviously tried it from a friend at work) but i dont think its really worth it unless my screw gun breaks or something

Is the drywall cut out Tool better then the previous model Clint? @Tool Review Zone

The case for my cutout tool is labeled "Steroid Dremel."

looks like overdrive to me

He said screw-er tool… reported 🤣🤣

Nice of Dewalt to finally bring that drywall drill up to par with the competition lmao. But seriously that no tool bit change on the cutout tool would be so nice to have, love my Milwaukee but would love that feature

Sheetrock work sucks. I'm more into charging $300 to replace a $10 capacitor on an AC condenser.

Bravo....👏👏👏

That scrap piece of pine-age is still about $64,000.00!!!

Stage 3 must be for a very small job unless you have 20 batteries on your belt

blast those screws right threw the board the inspector will defitnly fail you lol

I smeeshed the like button, because ima man!

Don’t like the gun to keep running similar to the old model. Loud and wastes battery. The auto feature is what was missing that Milwaukee and Makita has had for years.

Dewalt jacket Reveals the secret Paid commercial…. Just joking 😊😊😊

Great tools find myself using a oscillating tool on remodels cut off to dusty. You need to tether yourself don't want you laid up and evil twin taking over.

😎🛠️😎🛠️😎

Almost makes me wish I had a house full of drywall to install But how does Big Red compare??

Smeeesh that sub and for the good lords sake share this video!!

I can say it for you screw gun

Dumb question: could drywall cutout tool be used on wood?

those chordless guns have no finess sure there real easy to run but the depth control sucks that's wy I don't use them !!!

Give me your old one🤭🤭🤭

Are you sure you can say screwer 😂

Thanks for showing us this but you shouldn’t be risking your life like that for a tool vid, think of the children.

Noop. We build real houses here. Solid concrete and wood ceilings and doors. REAL wood too.Metal roof (third world stuff)

Gun! Gun! Gun! Gun! Gun! Gun! There ya go screwtube!

"boom" sound effects by celebrity impersonator "pushitin, pushitin) .... (thats why they so bad) .. hey Ohio, wtf dont you have winter? you just walkin around like its sept not feb. here in my country, ARIFKNZONA , up here in Prescott its in the damn teens.... TEENS!

no

Now everyone is going to cry and complain like little ass children that the button to change the speed is on the top 😢😢😢. Just like with Milwaukee. At least they left the reverse switch where it needs to be.

Your review is so Awesome, I’ve ordered these two already, back ordered😂 so what!