Would’ve liked to see a screwdriver flip out like Milwaukee.

Milwaukee didn't invent the concept but their version elevated the design into the stratosphere. That is what almost everyone carries and what everyone now copies. Imitation is the greatest form of flattery. But competition is good for everyone both in design and price. Bring it.

As a pocket knife hoarder, for utility these look well made especially for the price point. Cheapest knives I buy are $60+ lol. The thicker handle for most on the blade storage model is a con for constant daily carry, but that's why the other model exists. The fatter one with storage is more a heavy use guy, and the fatter handle actually gives better, more reliable grip on a job site.

If it angers anyone just don’t purchase it. Knife and tools don’t anger me unless they break. Just saying

It is always the Milwauk-I-A fans complaining

Bought mine today. The basic utility model. I switched the pocket clip to the opposite side but even though I tightened it down the clip was loose. I used my Dremel with ball end burr took it down where the screw goes in so when tightened the screw pressed tight against the clip. Then , on the other side there is a slot that appears to be for a lanyard but there is a screw in serving no purpose. So I just put a little pressure on that screw and it popped out. Then I put in a nice short lanyard. Nice 👍

My wife said you cut yourself almost as fast as I would have, lol. Thanks for video!

I have one of those utility knives because sometimes I have to assemble boxes all day long and well it doesn't exactly lock in place and can swing back it's so easy to open and I find it very comfortable

Usually the paper test for the blade is done from slicing from the outside to the inside. stabing the paper and ripping through it does little to show the quality of the factory edge. Because your technically poking the paper and causing it to rip before the edge is cutting. Kind of bypassing the test all together

Nice knife, i would like to own one for work, but the tape notch holder on my milwaukee fast back takes the cake. It really makes ripping stuff comfortable. I can't believe dewalt missed out on it. I mean, it's really dumb not to put one on a cool looking knife

I have the old version of the Dewalt flip utility knife and it's worn out so just in time for a replacement. I like the button action as well as the thinness of the one without the blade storage. and pricing seems about the same so even better.

I am so Appreciative that they didn't put a "wire stripper" on the utility knives when open!

Thank you for continually making entertaining and informative videos

Is it sharp? Clint: "Ouch! Yes. I cot mah self. It is sharp" Always putting himself in the line of fire so we don't have to. Such a great guy.

next time you do a knife review start with no band aides then end with most of your fingers in band aids. and a first aid kit. it will be hilarious and nice like.

I’m missing a lanyard hole. I’m trying to figure out what the little screw in the slot on the opposite end of the blade mount. It looks like that would be a good slot for a lanyard

There is a slight amount of blade play on my fastback - is DeWalt any better?

I will be picking up one. Don’t care about copying. I use Dewalt. 👍👍 I appreciate the info.

The big question is, where are they made? An AMERICAN Brand name should be made in the good old USA...:)

We need more Milwaukee lawn tools

The button lock is a Benchmade design. When the patent was up, everyone stole the idea. Saying DeWalt is copying Milwaukee when Milwaukee is just a copy... just seems silly.

I love the knife that is not serrated it is super sharp, found that out by accident!!!!

Really like the blade change on the utility knives, shame there couldn't be more exposed egde, but whatever 👍🏾

I noticed we have the same exact kind of wedding band my friend we purchased mine almost 20 years ago

Somehow the Makita Gnome made that blade cut you Clint!!!!!!!!!!!!!!! He's got it in for you!!!!

The belt clip on the blade end was about to be a deal breaker for me. Since it is reversible, I like it. Makes no sense to me to have the clip on the blade end. You have to pull the knife, then turn it over to use it. With the clip on the haft end, it comes out ready to use.

Don't feel bad, If I even look at my tools, I start bleeding. Nice review, and Go Browns!

I am a nut for a good knife and have Milwaukee hardline knives. but of course-the best knife is the one you have on yourself.

Bought the blade storage version the same day I got the email from Dewalt . The blade release sold me , much easier than Milwaukee and you didn’t show that the blade insert is just insert in slot and push in no pushing a button or pulling on a lever . I had been using the fast back for 10 years .

Clint my brother, how did you get the spiffy gift box?? I like those. I have the fastback but I don’t have these one. And since you missed my birthday in March!! Hahaha

$14.97 for that first one? Cheap Gas-station knife that likely costs 1/3 as much without the Dewalt logo on it. Reminds me of the cheap DeWalt multi-tool you can buy. (No, not THAT multi-tool that is battery-powered. That one is great. The other one.) Will never understand why DeWalt does this. Yes, we all know that when it comes to the most common three among the Pros, you have Makita, Milwaukee, and the higher-end DeWalt tools. The lower-end ones?.... Okay, some of them are quite good. Still worth buying. But these knives are below the lower-end DeWalt models. Not worth it unless you want to include an "official" DeWalt knife in a Photo-shoot featuring your latest, quality, DeWalt power-tool purchase.

button lock has definitely been around for awhile before milwaukee. Protech, Boker, CRKT etc. Allot of gravity knives also use some variation.

They do seem like a decent work knife. One that you wouldn't get upset about if you lost it (as opposed to your $300 Benchmade)

LOL.. damn OhiO you got my respect for NOT editing out your Ginsu incident, im waiting for the sawstop nazis... SFMF

I've been trying for years to become a product tester for DeWalt & to get them as a sponsor. Just seems nearly impossible. But great box & review

Getchu dem reviews done boyyy! Ayyy

I've been using dewalt knives for many years in my EDC (every day carry). I find myself using it constantly for pretty much anything.... from opening boxes to cutting steak.... LOL. Have a newer version similar to the one you are showing in my car...

I have a Milwaukee knife and yes - it's basically the same except for handle shape. Didn't come in that elegant 'bespoke' packaging though.

I really like the slim profile on the first and the second one too 👌🏽. Makes for a great EDC

Thanks as always Clint!!!!!

Clint I’m getting a little off subject but I wanted to ask you if you heard that the Milwaukee fuel gen4 1/4’’ impact is breaking down. I saw a video stating they went through 3or4 of them and they broke the same way,are you or did you experience any problems with your Milwaukee gen 4 1/4’’ impact driver?

Thanks for another great video Clint!

I heard it opened in some else's pocket and cut the other person's leg off?!! 😁

Your yard is looking pretty good. BECAUSE YOU STOLE IT! I had grass in my yard first. Then when other people got grass I had to start mowing it. People stole that. Then i used fertilizer and guess what….

You mean you are correct handed…lol! Hey competition is good! Now go get mama to tend to your wounds…lol!

Talk about copying. What I would like DeWalt to make is the small right angle battery powered die grinder Milwaukee makes. I use 2” Rolox disks a lot. A right angle grinder works well. But they’re too slow and too big and heavy. I ended up buying the Harbor Freight Warrior $15 right angle grinder (on sale for $9.99). It’s smaller and lighter and the weaker motor is fine for those. I don’t like the thumb trigger with the strong spring. The Milwaukee grinder is perfect. But I really don’t want to spend over $400 for a tool, charger and batteries for that one purpose, because, really, I have no other use for it. If DeWalt came out with one I would buy it.

You gotta switch those clips to tip up, and I hate that they're all serrated. But this aren't for knife guys, they're for DeWalt guys. The utility blade one seems alright, I'm on the Red Team though.

Not angry. I collect tools in general. And have duplicate tools in diff places. Built a box truck/uhaul this past jan with my grandsons. Diesel swapped from a truck. Truck started life as a hertz. So its yellow! Have dewalts packouts in there for power tools, have yellow hf us general series 3 yellow boxes in there too. Have a e350 van, in red its hand tools and power tools are milwaukee haha. My son has a 392 rubicon jeep, too rich for my blood. Have a 2020 rubicon gladiator with a 5.3L from a newer sierra. Its red too. My tools are icon, milwaukee, snap on, and craftsman. Powertools are milwaukee again. Have a '22 daihatsu hijet truck I use around my property, in town. Built a toolbox for it. Quinn master impact tools mixed with kobalt. All metric stuff. Power tools are makita. Wife picked up a 2022 subaru ascent in feb, she just finished her 6.2L LTX crate swap from mast engineering with her car club. Its penzy yellow and black. Her tools are the dewalt toolsets and power tools haha. She will love these edged tools 🤘

Nice video! Like these. Have a good day!😊

As a DeWALT guy I’m disappointed! There’s a handful of Milwaukee tools I use because DeWALT doesn’t have equivalent ones. I can’t believe they didn’t include a driver bit. If Klein put a driver on there’s DeWALT should have too. I am happy I received my DeWALT construction jacks today

Dang razors always wanna cut ya when they're sharp

Dammit I just replaced my fast back with another fast back and this blade switch looks sooooo much better😭😭😭😭

Let's not kid ourselves. Anyone can tell this is DeWalt's response to the fastback. Honestly, I like it better. I just bought the one that holds extra blades. I'm going to buy the thinner version later because I collect ones I think are interesting. I didn't like how the fastback didn't quite fit my hand. I bought one and then never used it. Update: I'm going to have to return it because it exposes more than half the blade. I don't know what kind of psychopath made that decision but if i flip the blade around I should have a fresh cutting surface. I'm legitimately very upset. I thought I found the perfect knife.

I am a Milwauk-I-A guy but thos are REAL NAS LIKE!!

lol. Just another day for that knuckle!😂

No mention of the steel, really.

DeWalt makes knives..... Why should that make me angry? 🤔 I demand something infuriating, right now!

The advantage Dewalt has over almost everyone is yellow is the easiest color to spot.

I thought those two on the left were automatics at first with that button

I have a fastback with a screwdriver and i love it. These are ok but i need to have the screwdriver

ty!

The lack of blade storage is no bueno

I just carry a quality knife. I leave the razor cutter in the tool box but i can see where this would be handy

Dewalt has had golding utility knives for a long time. Like at least 10 years. I have o e that I bought ten years ago. Doesn't have the same handle as that one, though.

That blade its like one of my lidl blade i use for more than 15 years. Lidl Germany brand parkside So no Milwaukee or dewald had make first .

Not a very subtle colourway. That yellow makes the knives look like toys. I know they ain't. But that yellow......

Are these in HD yet

I do have the Mil-waka-I-A fastbacks, but them Dee-Walts are real nass like.

Are they really made by DeWalt or are they just licensed to use the brand name? There seems to be several 'sets' with other names and similar functions.

I like the reversable clip but these look cheap like a promotional display that was never intended to be used.

I like the tip up option on these more than the fastbacks, but I would still go milwaukee just because the they look better imo the black and yellow looks horrible.

Awesome blades and cutting tools.

Any idea what kind of blade steel they using on the folding knife?

What's the product number for the four pack?

This whole copy this and copy that argument has to stop. If anything even it's true in this example it might make Milwaukee's next step better or at least keep them honest if Milwaukee was a monopoly in knives they'd eventually make one that doesn't even cut paper. Cheers to all and hope the projects across N.A. are going well.

Without mention of the blade steel. Gonna take a wild guess they are junk.

Where can I buy the kit as shown????

Milwaukee actually flips open.

Where can you buy them

Oooh....Ahhh. It's fancy, box time.

Oh! Is it April 1 already?

I'm not mad about the knives, in fact I think they're neat. I'm mad DeWalt is getting its teeth kicked in by Milwaukee and Milwaukee Jr. (Ryobi) in the innovation department

Not a dewalt fan but those are clean

Cool vid thanks for sharing!

Pocket clip looks like it's for right-handers only, tip up or down.

My state limit is 3 inches. The commonwealth of Virginia is 2 inches.

I don’t give a fuck I may buy the Klein one too I like them all I want them all.

do you have to buy the whole set?

Personally I like a Kershaw.

I like my Ryobi utility knife fastback.

Flip flip flip flip flip flip flip Yeah boi

He says it cuts well but he does a plunge cut into the paper instead of slicing into it from the edge as is standard. Says they open easy even though the flipper fails multiple times. He was either doesn't know much about knives or doesn't want to anger the company. I couldn't care less if fanboys are triggered by the last two. Utility knives flood the market now so it's irrelevant. Find what you like and stick with it. What matters for any knife is how it performs it's basic tasks and in this video the first two are questionable at best. Oh, and if you are going to review knives, including what specific materials they are made from helps. Especially for the blade.

hard to find decent replaceable blade ones always looking

That's a TANTO style blade cut

I do like Milwaukees screwdriver though.

Not as nice like as the Milwaukee

Edc is craftsman asst open,as fast as any auto that i have at 20bucks it wont tear ya up if ya loose it

Husky has the same in one knife for that price. With a lifetime warentee

The utility knives look good but for $15 the tanto and drop point have to be junk. I don't know why dewalt have changed to making junk now.

Love dewalt but these are not beating the Milwaukee 6 in 1