If you do all of this, you will ruin the top and warp the plastic pieces. Don't boil everything!
@HowToDoitright5 жыл бұрын
Zack Kolev yes you are right. I should have mentioned not to boil the cap with silver finish. Mine did dull after boiling.
@EBDeveloper4 жыл бұрын
rubbing alcohol eats oil
@lausse3 жыл бұрын
@@HowToDoitright not the small white cap eighter...
@chrisdab-2 жыл бұрын
@@HowToDoitright You should delete this video, it damages the Misto sprayer.
@HowToDoitright2 жыл бұрын
@@chrisdab- yeah you are right
@Lahud332 жыл бұрын
The way I clean mine I just take some hot water from the kitchen sink faucet put the insert part of the misto sprayer in a container for 3 to 5 minutes let some water run from the faucet again then I dry it with paper towels and it’s done.
@philipwebb9604 жыл бұрын
Why not just pump warm soapy water through it to clean it?
@iseezden1673 жыл бұрын
Hot soapy water fixed it for me.
@Zinkevm12 жыл бұрын
I did it with warm soapy water and sprayed until it was empty but it didn't fix it for me.
@emygarcia56032 жыл бұрын
Thank u. Never knew how to even use it
@marysgrace622 жыл бұрын
Okay, after maybe 3 or 4 minutes in the boiling water it is ruined. The plastic pump tube will not stay seated rendering my Misto useless. 😥 thankfully it is only a $10 item and not a $100 item. Hindsight tells me that washing in hot soapy Dawn dishwater would have been the "fix" for the Misto when it streams instead of spraying "misting". Thanks for making the video though!
@jeanneg93454 жыл бұрын
Going to try. I thought maybe I wasn’t pumping it properly
@Zinkevm12 жыл бұрын
I thought the same thing!
@thorgrootsweetrabbit22443 жыл бұрын
Thank You for trying to help people are so ungrateful
@lausse3 жыл бұрын
Darn. The heat from cooked water deformed my small white cap. Cant put it back on anymore. 😭
@n33oh2 жыл бұрын
This is a trick. Water is much less viscous than oil, so of course it will mist. You have to test it with actual oil.
@gerrimiller34912 жыл бұрын
Can I use blackseed or castor oil in this misto as they are really thick oils?
@dahuiflower6 ай бұрын
I washed thoroughly mine in every single part bringing it back like brand new, but still not working, like it doesn't keep the pressure inside. What can i do?
@HowToDoitright6 ай бұрын
It’s garbage I realized it later. Don’t waste your time. Throw it away
@browneyedgirlie3 жыл бұрын
Terrible video. Soak in hot soapy water, scrub with toothbrush, pump vinegar and warm water and soap through it will help clean it out.
@lady333573 жыл бұрын
whats the toothbrush for?
@fordprefect43457 ай бұрын
. I've stopped using mine they just put a fine mist of oil all over the place in the air as well as on your food
@HZ-fg9sf4 жыл бұрын
It totally ruins the stainless steel finish if you boil. Ugh should have edited that disclaimer in the beginning of the video 🤦🏻♀️
@HowToDoitright4 жыл бұрын
It’s plastic with silver paint. Not stainless steel
@HZ-fg9sf4 жыл бұрын
@@HowToDoitright Yeah I said stainless steel finish. Not that it's completely stainless 🙄
@HowToDoitright4 жыл бұрын
E L yeah mine has the plastic finish too. It goes bad if you boil it for too long. Time is critical.
@chrisdab-2 жыл бұрын
This video should have been deleted. Even HowtoDoit who posted the video said it damaged the Misto sprayer.
@HowToDoitright2 жыл бұрын
Yes agree. Sorry about that
@correzpond12 жыл бұрын
This totally useless video should be called 'HowToNOTDoit' and have been taken down when the poster received the first reports that their advice was destroying MISTOs. For reference you only need soak the internal pump/aerosol mechanism (NOT the entire unit) in very hot (certainly NOT boiling water!) for 5-10 minutes and then fill /pump/prime the unit with warm water and spray until the blockage has been removed and the unit sprays clear again.
@andreww78574 жыл бұрын
Makes no sense to boil EVERYTHING.... The problem is In the nozzle. Maybe cleaning that would work.....
@HowToDoitright4 жыл бұрын
Andrew W tried cleaning before but didn’t work
@davidandjanetgilliam61542 жыл бұрын
Your intentions were good; however, if a person were to follow along without watching through tol the end first, they would also harm their sprayer. Perhaps a disclaimer at the start would be good.
@HowToDoitright2 жыл бұрын
Yeah I agree. Wish I could add it now
@maryjanewoiszwillo51613 жыл бұрын
I followed this procedure, now the black label is peeling off around the screw top; had to throw it out.