Deye Hybrid Inverter Max 16pcs in Paralleling Operation
Рет қаралды 7,563
10 ай бұрынDeye Hybrid Inverter Max 16pcs in Paralleling Operation
@mhpprofi 6 ай бұрын
Würde mich freuen wenn es solche Anleitungen auch in Deutsch geben könnte 👍 🇦🇹🇦🇹🇦🇹
@paweljandobruk1791 6 ай бұрын
Happy new year 2024 and thank You for diagram
@uw5eaf 5 ай бұрын
Hello! I have 2x Deye 5k inverters (and I want them to work in parallel), a single-phase grid and one single-phase generator with start-input (NO relay) for solar inverters. And I have a couple of questions: 1. How should I connect generator to inverters? Should I connect it to only one of them or to both (GEN-port)? How should I connect G-V out of each inverter (should I connect them in parallel) to start the generator? 2. What is powered from generator when grid is de-energized? Only battery charger or backup load directly also? (I mean: how critical is frequency stability of generator and what about it's power?) 3. Am I right that I should configure "rated power" of generator as 1/2 of actual generator's rated power on each of 2 inverters? Thank you!
@jermainwhyte6894 5 ай бұрын
Do you have a 12kw split phase 120/220 volt USA version that they are selling on alibaba? I want to get that size for Jamaica. I want to make sure it’s 120/220 volt split phase and not 220/230 volt. Thank you. Also do you have an official site I can buy from?
@obusobusson736 5 ай бұрын
Why is all the three , three-phase hybrid inverters, connected in parallel marked as master in the video? Shouldn't it be master --> slave--> slave?
@sanyapatm 5 ай бұрын
Can we do parallel 8kw deye hybrid with 5kw deye hybrid
@Black74c 9 ай бұрын
Need help on connecting 2x 8kw Deye Inverter in parallel, after programming the inverter do I merge the Load output cables ? Example: Master Live cable to Slave Live cable...am overthinking
@makunan 9 ай бұрын
Yes, the diagram are the same for home load/grid output wires (same connector) and backup load wires, you need merge in their specific busbar. One for homeload/grid Line, other for neutral and other for Ground and the same configuration for backup load.
@DeyeInverter_official 9 ай бұрын
Hi,the load cables also need to be connected in parallel
@Kiril_Bulgaria 10 ай бұрын
Hello, could in the three phases parallel diagram CT to be replaced with smart meter?
@makunan 9 ай бұрын
Yes, you can use Chint or Eastron 3 phase smart meter
@Kiril_Bulgaria 9 ай бұрын
Thank you @@makunan
@DeyeInverter_official 9 ай бұрын
Hi you can
@FMG-MicroGas 12 күн бұрын
Can I parallel 16KW and 10KW hybrid inverter?
@user-gv3nw3dg6g 9 ай бұрын
hello , can i connect only two single phase inverter in parallel for a three phase load? and if yes how to do that.
@houcineamaidi499 9 ай бұрын
no u can't becouse the load need three phase not two phase for example (motor electrical )
@user-gv3nw3dg6g 9 ай бұрын
@@houcineamaidi499 thank you so much for your help
@DeyeInverter_official 9 ай бұрын
Hi.No you can't, you must use three phase inverters
@munkhnasan5589 4 ай бұрын
Hello, How to connect the CAN wire to 5 inverters in parallel?
@DeyeInverter_official 3 ай бұрын
This can't be done, the battery only communicates with the master
GigiBelea aka JAX
Рет қаралды 21 М.
JF Legaspi
Рет қаралды 142 М.
BalcevMMA_BOXING
Рет қаралды 4,5 МЛН
Jason Derulo
Рет қаралды 68 МЛН
GigiBelea aka JAX
Рет қаралды 7 М.
SPNMenergy แชร์ความรู้โซล่าเซลล์
Рет қаралды 4,2 М.
Skycorp
Рет қаралды 10 М.
Aman Soni Official
Рет қаралды 5 МЛН