DeZURIK specializes in slurry handling valves for isolation in demanding applications. Depending on pressure, temperature and percent solids, the following valve styles provide maximum performance in abrasive slurries.
KUL Urethane Lined Knife Gate Valves feature a one-piece, cast-in-place bonded liner that provides bi-directional, drip-tight shutoff to either 150 or 250 psi (1030 or 1720 kPa) CWP. The KUL knife gate valve is an enclosed design which keeps all process media contained within the pipeline with no discharge to atmosphere.
KSL-LA Long Body Slurry Knife Gate Valves features sleeves of natural rubber or other elastomers that are compressed by sleeve retainers that allow the valve to provide drip-tight shutoff to the full pressure rating of 100 psi CWP (690kPa), with higher pressures on application.
KSL-SD Short Body Slurry Knife Gate Valves features a short body design with face-to-face per MSS SP-81. This valve provides bi-directional, drip tight shutoff to full pressure rating of 150 psi CWP on 2-16" valves 100 psi CWP on 18” and larger valves, with higher pressures on application.
DeZURIK KSV Severe Service Knife Gate Valves meet MSS SP-135. These Severe Service Knife Gate Valves are ASME Class 150 and 300 rated for pressures to 740 psi and temperatures to 450°F. KSV Valves are bi-directional and used in high pressure, high abrasive services.
More Info: www.dezurik.com/
Follow us on Social Media:
/ dezurikapcohilton
/ dezurik_valves
/ dezurik.apco.hilton
/ dezurik