Dialling in your Putzmeister/HBC boom functions:

No video

Dialling in your Putzmeister/HBC boom functions:

Рет қаралды 4,647

Күн бұрын

Using a “teach battery” to set boom function parameters on a Putzmeister concrete pump with an HBC 727 wireless radio control.

Пікірлер: 27

@benjaminfooter6564 2 жыл бұрын

I had to fight that fight when they were way out of tune. Always a good help to be able to watch a video of it Scottie. 💪🏼

@canadianconcretepumper1979 2 жыл бұрын

Makes you wanna jump back on the sticks, doesn’t it??? 😂

@jigglychunkdavid 2 жыл бұрын

Sup Benny

@chadjones4819 2 жыл бұрын

i learn so much from your videos. i have a 2020 38-5 putz and look up your videos before i call anyone else.

@canadianconcretepumper1979 2 жыл бұрын

I appreciate you watching brother. That 38-5 Putz is the greatest piece of concrete pumping equipment which I have ever laid my hands upon. Enjoy it every day my man!

@randyanderson1983 2 жыл бұрын

Great video sir always good to have someone show the ropes

@canadianconcretepumper1979 2 жыл бұрын

Thank you Randy. I appreciate you watching the channel.

@johnsibley5878 2 жыл бұрын

Informative as always Mr Canadian Pumper

@EM0601-x4h 2 жыл бұрын

Big help thanks!

@canadianconcretepumper1979 2 жыл бұрын

Thank you for watching the channel 🙏

@mcdjay 2 жыл бұрын

Great video Scott!

@canadianconcretepumper1979 2 жыл бұрын

Thanks brother 🙏

@williambjorklund1586 2 жыл бұрын

Awesome!

@canadianconcretepumper1979 2 жыл бұрын

Thank you for watching.

@HighTQCummins 2 жыл бұрын

ive been trying my best to get out 47-5 dialed, its the ergo 2 system (with the color screen) so I know thats a totally different beast. I'm not the best boom operator in the world, hope to be some day, but boy that thing makes it look like its my first time with the remote strapped to my waist

@canadianconcretepumper1979 2 жыл бұрын

I believe those ones can only be tuned in the “user defined” mode. From what I recall, rabbit/turtle booms speeds can only be adjusted via plugging in a laptop and using the factory software. (my experience with ergo 2.0 is admittedly minimal however).

@canadianconcretepumper1979 2 жыл бұрын

Definitely the bigger the boom the more labour intensive it can be to get done tuned. They have a tendency to amplify our errors as operators 😂

@jigglychunkdavid 2 жыл бұрын

The ergo 2 was definitely a setback for the user.

@canadianconcretepumper1979 2 жыл бұрын

@@jigglychunkdavid They appear to have more than made up for it with the new Ergo 3.0 (at least from what I've seen of it so far).

@hippiespirit9386 11 ай бұрын

How much volt need to this battery ?

@bevanbraun8433 Жыл бұрын

Where can I get one of those batteries cheers

@canadianconcretepumper1979 Жыл бұрын

Most Putzmeister parts retailers should have them. I’m sure it could also be ordered directly from the Putzmeister as well.

@williamking9494 2 жыл бұрын

Scott can you explain the functions of the remotes on a bigger pump

@canadianconcretepumper1979 2 жыл бұрын

Aside from having a 5th boom section (typically operated via a twist function on the left hand joystick), they’re essentially identical to the remotes which are used for smaller booms. That being said, the remote shown in this photo is an older generation HBC unit, we do have various levels of revised versions of this remote on some of our newer rigs. Next time I’m out on one of them I’ll do a quick walk through.

@Bsfkoff 2 жыл бұрын

I tuned mine so I can full toggle extending and retracting the boom in z keeping the hose level (4 stage putz) how come you hit the e stop on your remote remote much I try not to use e stops unecessarily incase they wear out

@canadianconcretepumper1979 2 жыл бұрын

To my knowledge the e-stop must be used in order to save the settings (as mentioned in the video, perhaps just powering the remote off using the toggle switch would achieve the same thing). Agreed however, for normal powering on/off of the remote control, we just use the toggle switch.