Dibea D18 motorized brush fixing

Рет қаралды 15,840

5 жыл бұрын

This video shows how I was struggling with motorized brush of Dibea D18 and how I managed to fix it. I hope it will be useful.

Пікірлер: 19

@ummesa3661 4 жыл бұрын

Really helpful video as the brush on my Dibea stopped rotating and the lights kept going off. I fixed it after watching your video. Many thanks.

@lydiachai993 4 жыл бұрын

I really hope you can reply me as currently my Dibea is giving me issue somewhat similar like yours. After I switch on the vacuum for 3-5 seconds, then the battery light starts blinking, the motorized brush lights go off, and the brush is not rotating too. Please let me know if your situation is similar like mine and does the tutorial in the video help to solve your problem? I am worried as this problem happens when my Dibea is only less than 3 months old. Awaiting your reply.

@sarahy6098 2 жыл бұрын

Thanks! Mine was the second problem. We have long hair and it was wrapped around so much it couldn't spin. I thought it was electrical because it would spin a little then stop. So glad to have it working again.

@sandrazambellibais1645 2 жыл бұрын

To remove the cover you have to pull out the 2 little rolling wheels and unscrew the screws underneath. Remove the belt and unscrew the electric engine. Pull out the top of the rolling mechanism and clean hair and dust. Finally oil and reassemble.

@aleksdude Жыл бұрын

This brush head is also used on an onson brand d18e (part fs001). Thanks, I imagine one day I will have to do this fix.. my motor squeels like crazy.

@rachelkolenda8321 3 жыл бұрын

Thank you! Fix number 2 for my vacuum.

@mv5637 3 жыл бұрын

A very helpful video!

@shukrinordin2935 2 жыл бұрын

Tq..really helpful..almost throw away my vacuum

@MsHackthat 2 жыл бұрын

Salam. Solution mana yang jadi ye?

@lillukable 3 жыл бұрын

Thank you so much that you exsist 😄,help me alot 🎈

@genreyaguilar 3 жыл бұрын

thankyiu so much!!it helps i thought i cannot use may vacc.again thankyiu so much #2 fix 😊😍

@Mish891 4 жыл бұрын

If this solution does not work for you, unscrew the bottom cover of the vacuum head and pry it open. There is a belt not far from the motor that may be loose. I couldn't find a way to fully take off the cover and ended up bending it in the process but after adjusting the belt with a pencil and screwing it shut it is good as new, besides for some cosmetic wear as a result of the bending. I also left cardboard on the side of the belt so that it does not fly off again.

@samuelharle910 3 жыл бұрын

This was a very helpful tip - thank you. The belt had simply come off it's rung and with a pair of tweezers, easily sorted. Many thanks

@gitarahmatika6707 4 жыл бұрын

Thankyouu, a helpful solutions 👍

@aidanazri3186 2 жыл бұрын

Thank youuu for the solution or else i would waste my money to buy a new roller, thank you very muchh 🙏🏻

@3xorcist 4 жыл бұрын

very helpful.. tried cleaning the brush head and it all went back to normal. my brush and lights turns off exactly 7 seconds after turning it on. im guessing its a self protection circuit to prevent strain on the rollers.

@brawlnfun3435 4 жыл бұрын

I have the same problem what do you mean by cleaning the brush head?

@stribs311 3 жыл бұрын

Same problem here