Did The New Jescar Performance Cut Compound Outperform? Should You Add It To Your Arsenal?

Рет қаралды 2,637

Күн бұрын

Did The New Jescar Performance Cut Compound Outperform? Should You Add It To Your Arsenal? In todays video, I share my experience with the new Jescar Performance Cut Compound. PCC was engineered to bridge the gap between heavy compounding and single-stage polishing. Meticulously crafted to deliver incredible cutting ability, the PCC formula effortlessly eliminates imperfections while preserving surface integrity. This groundbreaking abrasive technology not only raises the bar for performance, it also redefines the possibilities of efficiency, empowering enthusiasts and professionals alike to achieve flawless results with unmatched efficiency and ease.
jescarfinishing.com/products/...
Cut to Finish Dynamic: Performance Cut Compound has a unique cut to finish dynamic, where aggressive cutting power seamlessly transitions into refinement. From heavy defects to simply refining a finish, Performance Cut Compound provides the benefits of two separate products in one bottle.
We will set up a test panel and see how it performs with a rotary polisher as well as a dual action polisher with a Urofiber 50/50 pad. Does it perform as advertised.....Let's find out!
#jescar #paintcorrection #cardetailing #autodetailing #jescarpolish
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
www.apexautosurfaceprotection...
Apex Detail Support Group (FaceBook) / 9462450

Пікірлер: 55

@apexdetail85 13 күн бұрын

What is your favorite polish or compound?

@skipgumphrey9579 13 күн бұрын

I’ve always relied on Meguiars M105. Still have a good supply on hand, but I’m not afraid to try something different next go around ;)

@knightautopcd 13 күн бұрын

Angelwax for us ... the new Resurrection Extreme is 💴 for those hard stubborn clears ... plus the OG resurrection regenerate and redemption plus of course Enigma AIO when it's needed

@user-ks5tm5hg4x 13 күн бұрын

Menzerna Heavy Cut 400 "improved formulation" then step-down w/P&S Rehab

@PeteyMcSavage 13 күн бұрын

schols s2 black griots fcc

@barrydehart5630 13 күн бұрын

What do you like better this new Jess car for the 3D 510

@Chris-wb7ni 10 күн бұрын

I like the 3D and the Oberks with a euro fiber pad. Always does the trick for me

@neilwalker5041 13 күн бұрын

Excellent video on a nice looking product which gets you in and out quickly. Thank you for the video!

@TopShineDetails 13 күн бұрын

Second! Another great informative video, Brian.

@williampinchbeck4321 13 күн бұрын

Thanks Brian good info!!

@kevkav5680 13 күн бұрын

Another really good demonstration, my favourites are Angelwax regenerate , and 3D one !

@timbrown9731 9 күн бұрын

Brian, I’ve been screwing around with their ultra lock. I gott say I’m pretty impressed with their product. It looks awesome on my 13 ISF in ultrasonic blue, I tried to send you a couple pictures of it on your Instagram page under messages.

@mireffafhassan1245 12 күн бұрын

Is it similar to menzerna cut force pro

@kimnewling5728 13 күн бұрын

3D One. My favorite with a 50/50 microfiber pad on medium clearcoat. I adjust up and down from there. Brian, do you have a nice smooth "ride" on the polisher with wool pad on a rotary, and a 50/50 on a d.a. ? Thank you for the review Brian.

@shooterjohn7163 13 күн бұрын

I use 3D One but I’m using it on my heavy equipment and trucks. It works very well for me and keeps the machines looking nice. Brian good video it did look a bit short on working time. I use 50/50 microfiber pads on a Rupes d a.

@denniscolyn5435 13 күн бұрын

3D one and a rotary are my go to.

@norcalspitshine6406 13 күн бұрын

Nice

@bigd9848 13 күн бұрын

3D1 is one and Koch Chemie p6o1.3D ACA 520.A few of my favorites

@glennturner6672 13 күн бұрын

Love your demonstration of all kinds of products. Question is what would you recommend using on a large rv with oxidation and vinyl graphics..

@apexdetail85 12 күн бұрын

A one step such as 3D One. 3D One is oily which is fine on that dry, thirsty gel coat.

@thatdude3832 11 күн бұрын

Nice Work once again! I've been using a lot of the 3D products, but I haven't found the best compound yet! So whats your go to compound for hard BMW paint? (750LI - Alpina)

@petreticu6008 10 күн бұрын

Try ACA 500 with a wool pad on a rotary. I use the purple wool from Lake Country, amazing correction speed and finish, use 500 rpm only, speed 1 on my machine. Flawless results no need for step 2.

@orthodox1717 13 күн бұрын

I have it. Not bad. I think I like Koch H902 a bit better, but too early to tell. Have Optimum Hyper Compund v5 on the way.

@btbd2785 13 күн бұрын

i am curios Bryan The Rotary with a wool pad. In this case a Hybrid Wool Purple pad, typicall cuts better and faster than a DA with a URO 50/50. Why do you think the DA with the URO 50/50 did a better job overall??? I also wanted to ask you what is the brand/model ir Rotary tool is it that you are using? Thanks Bryan!!

@apexdetail85 12 күн бұрын

In this video, a DrillMaster. Some abrasives team up better with microfiber than wool which was evident in this case.

@nicholasthomas3635 13 күн бұрын

Is there a comparative video of several of these recent releases in the works? Both in performance & cost.

@apexdetail85 12 күн бұрын

I will do a side by side comparison

@Redsdetailco 13 күн бұрын

Great video. I am a bit confused though so maybe you’ll respond in assistance. The product seemingly outperforms in its category and only got a “6.5-7?” I’d love to know why you felt that way. It also seemingly has a fantastic cut to finish, especially going through 4 grits like a hot knife through butter. Looking forward to your response

@apexdetail85 12 күн бұрын

A 7 is a fantastic rating....on my channel anyway. 9 is the highest given as there is no perfect product out there (10). A longer cycle time would boost it and it quickly clogs my pads.

@Redsdetailco 12 күн бұрын

@@apexdetail85 ahhhh I see. I apologize if you stated that your highest mark is a 9 and I didn’t hear it. It clogs your pads? May I ask what your pad cleaning preference/frequency is?