Finally testing the Abandoned Ford Tractor!!

Рет қаралды 34,230

6 ай бұрын

Well, it drives out of the garage and it looks pretty nice. But does it work nice too? If you missed it, I bought this Ford 861 diesel sight unseen and it ended up needing a full engine rebuild. Over a year later it is finished and time to put it to work! We test it out today with a box grader and an old ripper that we have laying around. What should we do with it next?
Miss the previous videos in the series? Check them out here - kzfaq.info/sun/PLNVOrO-ySsu6Gh_o0g0uJSItxbLWI5VxQ
Have some equipment you think we would be interested in?? Send us an email or drop a comment! Contact email located in the about section of the channel. We are located in Michigan, USA.
FOLLOW US ON INSTAGRAM - diesejl
Check out our AMAZON Storefront - www.amazon.com/shop/diesejl
As always, thanks for watching! Be sure to like, subscribe and share! Leave any questions in the comments!
DieseJL is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn commission by linking to Amazon.com and affiliated sites.

Пікірлер: 120

@dieseJL 6 ай бұрын

What should we do with it now? 5 bottom plow?

@davechristel5408 6 ай бұрын

5 bottom might be a bit much 😊

@ronfrance4041 6 ай бұрын

5 bottom requires a lot of tractor. For the weight of that machine 3 bottom might right

@ClintsHobbiesDIY 6 ай бұрын

It's just a pleasure to look at.

@92nbush 6 ай бұрын

Ford videos back in the day had 3-4 bottoms on them I'd love to see a 5 bottom for comedy sake 🤣

@dieseJL 6 ай бұрын

It’s funny our backhoe has never had traction issues with all of the weight. If you could get traction it might work

@larrylane6512 6 ай бұрын

Nice to see a young man bringing older tractors back to Life Great Job

@bourbonbeertractorsandprep9335 6 ай бұрын

They will slober also known as wet stacking when they idle alot. Usually kicking it up to higher rpms will clear it out. It will do it more in cold weather than hot weather. Nice job on her!

@dieseJL 6 ай бұрын

Thanks!

@4321grp 5 ай бұрын

@bourbonbeertractorsandprep9335, correct, also It should have around a 180 degree thermostat.

@Military-Museum-LP 6 ай бұрын

I would find wheel weights before adding additives/calcium to the rear tires. The rot in the wheels these chemicals cause is not worth it. You did a fantastic job!

@dieseJL 6 ай бұрын

Thanks! What about beet juice

@3sparewashers-lg3gf 6 ай бұрын

I think beet juice is the way to go.

@Military-Museum-LP 6 ай бұрын

@@dieseJL. I don’t know about this. If the beet juice was fermented it would have alcohol contents to keep it from freezing?

@michaelhounsell3888 6 ай бұрын

My father in law always used calcium and never had any problems.

@jazzerbyte 6 ай бұрын

Great to see it working as well as it looks! Rear wheel weights might be hard to find, but they'd prevent the occasional leaks that rust out the rims.

@dieseJL 6 ай бұрын

Beet juice should be ok

@amos4457 6 ай бұрын

The reason you're seeing that black oily soot on exhaust is called wet stacking. Just keep putting a lot of loads on it an the wet stacki,g will stop try not to idle it a lot of needs a load on it

@LittleNokesvilleFarm 6 күн бұрын

Correct

@3cl1 6 ай бұрын

What a great looking 861, nice work.

@christopherweise438 6 ай бұрын

You did an awesome job on her Tyler. You should be very proud.

@ericwilkinson1771 6 ай бұрын

love to see you working with your dad lucky young man

@normpowell3566 2 ай бұрын

A piece of history. Thanks for restoring it to its glory days.

@jamesschenk1963 6 ай бұрын

Great job on restoring that tractor looks and runs fantastic

@Military-Museum-LP 6 ай бұрын

To rest your concerns take a compression test to monitor the ring/cylinder breaking in.

@j.w.3345 6 ай бұрын

What a great job! Beautiful Tractor! I really enjoyed the videos.

@DH1942 6 ай бұрын

Smoke cleared right up! She runs good. Nice job.

@frankwrogg2515 6 ай бұрын

Great job, would be very proud of that work you did.

@harrykeel8557 6 ай бұрын

Man, that's a sweet sounding and running little tractor. Congratulations on a remarkable job on getting it running.

@joerodrigues3816 6 ай бұрын

What an amazing job mate good on you and your Dad

@TKM1951 4 ай бұрын

I have binge watched this series . I enjoyed it and was disappointed when it ended . You have given me a lesson in patience and perseverance with this project

@user-dn6ij6lm2g 6 ай бұрын

Wow love it , Iwork with one in 70's and it ad power , the plow was just 2 bottom and it could andel A 3 B but rear wheel are not aline with the front , you got tund them closer to fender .

@staleyexplores Ай бұрын

Seems strong and fun to run

@SchnelleKat 6 ай бұрын

Dang man! real nice. it pulls that chiesel nice too... your obsession is now mine! I'm actively trying to find a Narrow front lol. LP would be sweet. If you load the tires. Run beet juice it's next too free in price and doesn't corrode the rims. Where are your lights at?! lol. P.s cherish the memories you have of your Grandpa's '801 with the Sherman backhoe. Thems be getting up there in collectability and price..That'd be one heckva restoration!

@dieseJL 6 ай бұрын

Maybe someday!

@gp7013 6 ай бұрын

Super cool, great job!💪🏼

@lawrencelipon8673 6 ай бұрын

👍👍👍👍👍👌Great job purrs like a kitten , no bogging lots of power, and looks so good!!

@tripler3724 6 ай бұрын

I use Kubotas now, but grew up farming with Fords of that size. We always had fluid in the tires; we use fluid and wheel weights now. To plow, swap rear tires for narrow tread, front is adjustable. To "layout" the beginning set your plow even then adjust to compensate once you have a good furrow. My brother drives 9000 John Deeres, but still uses a couple of old Fords because he loves them 600 and 601.

@dona6891 6 ай бұрын

Great job on that resto looks and sounds beautiful. I have a 61 4000 and i found a set of full pie weights and restord them to help with useing a seven foot box blade to level some of my land here in vermont. Worked great. Also have a new to me 58 861 with snow plow to take some of the of the pressure off of the 4000 for snow removal. The 861 has beet juice in the rears for traction. Both tractors have full sets of chains. You can get into trouble with pie weights on hilly terrain,. Loaded rear tires, if done right are better for center of gravity. Loved your vids, take mama out for dinner and celebrate! Warren in Vermont.

@larrybolhuis1049 4 ай бұрын

Agree on the loaded tires, and figger out what's up with that PTO. But fantastic job, looks like it runs fantastically and great power and torque there! Appears to be breaking in and the smoke is getting better. A semi-mounted style plow that pulls from the 3 pt and lifts the rear end with a hydraulic cylinder over a ingle tire seems like it would be a great option.

@jeffbangkok 6 ай бұрын

I started plowing and disking at 9 years old on a Select O Speed 800. Dad had 2. With front and rear weights the front would be in the air at times. Pulling a chopper and silage wagon it would spin out upslope due to no differential lock. The 5000 in 1967 cured that. The 800 worked everyday blading out the free stall barns till it was parked in the 90's. With your talents I wish you'd tried a Select O Speed.

@dieseJL 6 ай бұрын

Well I can have more than one tractor… maybe we will do one of those someday.

@4321grp 5 ай бұрын

The select O Speed is nice to use but they broke a lot, The standard transmission on the old Fords was a lot more dependable.

@DKTractors 6 ай бұрын

Beautiful job

@jamesmorrison1884 6 ай бұрын

Looks great have a good day.

@benjaminsmith5811 6 ай бұрын

Great job.

@jamescorless8283 3 ай бұрын

Nice tractor, looks brand new.

@Michael_CS615 6 ай бұрын

You worked hard to get to here so enjoy!

@danielfoley6345 6 ай бұрын

Put wheel weights on your tractor for tillage work. These 861's had plenty of engine power but were known by customers and dealers to be light in weight. All the vintage training films from the old Ford Tractor company displayed these tractors with rear wheel weights. Also, the additional weights would help the tractor not to jackknife on hillsides while attached to implements such as pull type combines or hay balers. I speak from experience as we had both an 860 and an 861 on our hillside farm in southwestern Wisconsin. I enjoyed your presentation immensely as it brought back the many memories of operating our Ford tractors while growing up as a youth! Looking forward to your additional videos on vintage Ford tractors.

@dieseJL 6 ай бұрын

I’m going to load the tires first I think

@ufoguys1264 3 ай бұрын

Nice go get some more 😮

@dakotavogel6907 6 ай бұрын

I liked seeing the diesel next to the 800. Should get pie weights for it. 3pt over trailer I just got my first tractor about a year ago, ford 640 with a wagner loader. Now I have a huge addiction to the ford tractors. Rebuild its motor and took it on a 70 mile drive 3 different times

@danielerickson446 5 ай бұрын

I like how the fuel tank sits above the motor and muffler. Keeping that fuel warm! Look for a 3-16 John Deere wheel plow with coulters. That Diesel will walk away with one of those.

@larogersii1 6 ай бұрын

You did an amazing job on this restore. Thank you for the videos

@DOUGLASLASH-xy4ct 6 ай бұрын

LOVE IT!

@user-pu9ek8je7z 6 ай бұрын

My 861-D is also kinda slobbery out the exhaust, seems like it's more pronounced in cold weather. It runs really good so I haven't messed with it (yet)

@duanebolen543 6 ай бұрын

If you're not using the PT o, you can take the linkedige on a clutch pedal and move it into the other hole on clutch ride. And then you won't have that clutch pedal up so high. But then when you wanna use the p d o, you'll have to take and reset it in the other hole on the cluch rod

@hh-qc7rp 6 ай бұрын

Absolutely gorgeous

@johnmcmaster8995 6 ай бұрын

NICE!!!!!

@karenstipp4305 Ай бұрын

your 861ford turned out beauiful , put some headlights on it, also I have a new holland t-1530 and its diesel and 45 hp it pulls 3-16s fine ,as I remember the 861 is rated @ 45 hp,the plow is a ford 101 with a level arm on it. I restored it in ford red tiger paint good luck

@karenstipp4305 Ай бұрын

p.s. the plow is 3 point hitch

@garyfeltus9801 6 ай бұрын

You will need to put a plow or disc behind it and really work it hard to seat the rings in good . Then it should quite slobbing. CK out squatch 253 can't tell what episode it was. That rebuilt cat engine did the same thing. Them old motors had a different metal in them .

@dieseJL 6 ай бұрын

Huh that’s good to know. Work it, I can handle that

@donbaker9715 6 ай бұрын

Mounted plow for sure. That three point hitch was designed for a mounted plow. It has draft control which would would not work with a pull type plow.

@royholt6980 6 ай бұрын

good to the right color pant

@enriquegutierrez4068 5 ай бұрын

Most beautiful. I'm going to need some help from all of you guys to help me with my 59 861D.😅

@dieseJL 5 ай бұрын

I need a few years before I do another one haha

@92nbush 6 ай бұрын

Beautiful tractor, definitely need a 3 bottom 3 point. Trailer plows won't help you any with the draft issue you may run into with the track width being set so wide. It'll still pull, it'll just pull a little harder. If it was me personally I'd just flip the centers of the rims around so the dish is in. Not sure if your going to put a loader back on it but it wouldn't interfere with the loader anyway. To me it looks a little goofy with tires so far out from the fenders but it's your tractor do what you want

@dieseJL 6 ай бұрын

Oh yeah wow maybe I could just flip sides in the tires eh?

@russb257 6 ай бұрын

Back in the early 1970s my dad bought a derelict NAA Golden Jubilee from a junkyard in the suburbs of Chicago and we spent a year tearing it down in our garage in inner city Chicago and found that it had a HI/STD/LO ranging transmission inside the bellhousing but no selector handle so we had to source one of those but parts were easier to get then. We rebuilt the engine, transmission, fuel system, hydraulics and even the electrical system. Anyway it's on my parents' farm in north central KY but both parents passed in 99 and 01 and myself and my 3 sisters sold our fifth to my brother and he still runs it regularly. Other than normal maintenance issues the only problem we had since the 70s is the exhaust replacement and brakes. On the PTO there is an extender you can get that attaches to the standard PTO and brings the attachment point out about 4 inches which will alleviate the problem with the hookup with the quick release button hitting the hitch mount. Your diesel 861 is almost an identical twin overall to the NAA we rebuilt.

@dieseJL 6 ай бұрын

Yeah the jubilee is a cool tractor. We have one that needs restoring actually.

@dickdavidson3616 6 ай бұрын

Thanks for the update. Must feel pretty good after all that effort. Well done son!

@gilsongallego2328 2 ай бұрын

Put a little transmission fluid in the fuel filter. It will lubricate the pump.

@user-kk9vl6yy6n 6 ай бұрын

Шикарные трактора

@kevwelsh7209 6 ай бұрын

Get the back wheels moved in and go ploughing! It'll also fit in your trailer better ☺️

@austink3919 5 ай бұрын

Big fan of this project and your content as a Dad of tiny kids. I have a 4-cylinder 4000D in progress and a 961D waiting for someday. Did you use any sealant on the manifolds to block?

@dieseJL 5 ай бұрын

The only place I used sealant was on the rear main seal and any t joints

@davidgerber9907 6 ай бұрын

On a restored tractor like that don't put calcium chloride in the wheels. Real bad idea. I bit the bullet and put wheel weights on to add weight. Mounted plows on those tractors work better over trailer plows.

@3sparewashers-lg3gf 6 ай бұрын

Rim guard/beet juice is as heavy and is non corrosive.

@DH1942 6 ай бұрын

Pie weights!!

@MrHowieZ1973 6 ай бұрын

56 horsepower was a ton of horse back in the day

@316jd140 4 ай бұрын

Nice old Ford tractor.

@Routelock1 2 ай бұрын

Looks like you exhaust cap was open when trailering. Is there a way to turn it to the side?

@user-bg5tf5tq6n 5 ай бұрын

素晴らしい、綺麗なトラクターだフォードトラクター

@MokesEnd 6 ай бұрын

Still need to swap the rear wheels over!

@jameskelley8839 6 ай бұрын

Saw the TD 20 backed up where you parked it

@dieseJL 6 ай бұрын

Just waiting for more trees

@brianhayes7618 6 ай бұрын

3 point 2 bottom 14s shoud work fine so much better than trailer

@donbaker9715 6 ай бұрын

That tractor will handle a 3 bottom for sure. I'd look for a 3 bottom 16 inch plow.

@dieseJL 6 ай бұрын

Yikes how about 3 12’s

@jameskelley8839 6 ай бұрын

just now figured out you're the same guys who bought the TD20!..

@dieseJL 6 ай бұрын

What gave it away?

@michaelastone7758 6 ай бұрын

You have the centers on the back wheels backwards

@russwabuda1556 6 ай бұрын

mounted

@normanglussier6473 6 ай бұрын

3 bottom plow

@michaelastone7758 6 ай бұрын

Do you have headlights for the tractor

@dieseJL 6 ай бұрын

I do not actually

@user-ze5lq9vv4c 6 ай бұрын

I think ya got too much air in your rear tires air them down a little they bite better plus some wieght

@bobgrauer 5 ай бұрын

Tractor data says the 861 is a 3 plow probably a 3/14

@franmolisanz 17 күн бұрын

Que motor trae??? Gracias!!

@dieseJL 17 күн бұрын

It’s a ford 172 diesel

@Military-Museum-LP 6 ай бұрын

Is that an exhaust manifold leak on your Kubota?

@dieseJL 6 ай бұрын

It is. Bummer for a tractor with a thousand hours.

@karenstipp4305 2 ай бұрын

5 bottoms to much 3/16s would be plenty enough if that helps

@sergueiothonucci1638 6 ай бұрын

😃😃😃

@jacksonfolwarski952 6 ай бұрын

Get a 3 point plow

@scottwooldridge8946 6 күн бұрын

Is that a Jubilee?

@dieseJL 6 күн бұрын

it is like the successor to the jubilee

@ClintsHobbiesDIY 6 ай бұрын

Hooray Tyler. She's sweet.

@Truklodyte 6 ай бұрын

Well if you want something bigger I have a running 340 with a dozer blade I will trade you. She isn't a standard 340. She is 8ft wide

@duanebolen543 6 ай бұрын

Well you have 40 plus hp your pump is putting to much fuel you need to work it harder an run it at a higher rpm an not lug it so it burns the fuel

@Appl406 6 ай бұрын

Old tractor fans (and new tractors and farming) 👇

@thomasr.miller5553 6 ай бұрын

Hey Fantastic ! 😁My neighbor bought one NEW 1960 . It did not sound like yours .... Red tigers purrrrr. Your ford has an injector problem . One or more injectors are not spraying fuel correctly . that's why you have a sooty discharge with blue smoke . some of the fuel is not being burnt THIS COULD DAMAGE THE MOTOR !! I will guess that you CHEAPED out on the rebuild. Great video thanks