Anyone can Make Sneakers! - Patterns for ALL Sizes Available

Рет қаралды 114,666

Жыл бұрын

Making a pair of good leather sneakers is much easier than you think. Just follow this tutorial to get started
Get the patterns here:
www.leather-patterns.com/prod...
and here
www.etsy.com/listing/14315201...
You can find the exact soles that I used and that will work with my sneaker patterns here:
Men: www.etsy.com/listing/15282731...
Ladies and Kids: www.etsy.com/listing/15424578...
You want more patterns for less? Become a member and get two FREE patterns every month and get access to all our LIVE sessions
/ @dieselpunkro
More patterns available on
www.leather-patterns.com/
and
www.etsy.com/shop/DieselpunkRo
Recommended tools list:
Hole Puncher - www.etsy.com/listing/15282740...
Stitching Needles - www.etsy.com/listing/1528273652
Positioning Needles for stitching - www.etsy.com/listing/1528273156
Sinabrok Puncher - sinabroks.com/products/stitch...
Laser Cutter - xTool P2 laser machine: www.xtool.com/products/xtool-...
Cement Glue - amzn.to/3VpTd4z
Snap Fastener Tool - amzn.to/3VJtXaS
Utility Knife Blades - amzn.to/3VGifxE
Curve/Corner Cutter 1/4 - amzn.to/4cmcYR4
Curve/Corner Cutter 1/2 - amzn.to/45suUY3
Edge Dye Applicator - amzn.to/4b9pYsq
Waxed Thread - amzn.to/3RrrnUh
Paper Masking Tape - amzn.to/3VoGb7h
Hammer for leather working - amzn.to/4er7Kpo
Cutting Mat - amzn.to/3KJTomb
Leather Craft Tools Set for Beginners - amzn.to/3RtPIsJ

Пікірлер: 189

@bdlbug6 Жыл бұрын

Shoe repairer here. Please scuff up the sole before you glue it. It makes the bond much longer lasting because the glue has more surface area to stick to.

@keatman Жыл бұрын

I noticed that too. However, since he stitched at the edge, it doesn't matter that much as the stitching will secure the sole and upper. It'll also be helpful when the sole need replacement and the cobbler don't have to fight with strong glue to remove the worn off sole.

@aliciaaustin8373 Жыл бұрын

Umm he glued the flesh side to the rubber sole no need to rough it up. The inside needs roughing before the inner sole is attached which he didn't show but he did everything correctly.

@donlapham1265 Жыл бұрын

@@keatman A heat gun will take care of that!

@Paul-044 5 ай бұрын

That's a great idea and very true

@Ajith-ib3ul Ай бұрын

JfK, என அறிய விரும்புகிறேன் என்று நினைக்கிறேன் போன்ற விளையாட்டுகள் மற்றும் பலகை ஆன்லைன் விளையாட்டு பால் புதிர் போன்ற பல பகுதிகளில் இருந்தும் பல அம்சங்கள் பட்டியல் பதிலளிக்க அட்டவணை

@stephenrobb8759 Жыл бұрын

A tip on the non water based glue - For difficult things to get positioned... do the regular glue on each piece... let it dry completely . This becomes a primer coat. Then, add a fresh layer of glue and put the parts together while wet. This gives a slippery few moments to push tight curves into place. This method needs longer to dry, like overnight. You can test it on scraps, I learned this method from saddle makers. Some saddle parts are so curvy and tight... they even do a method of - prime the piece with glue, let it dry completely - then soak the leather to make it moldable . next dry off the primer layer, add new wet glue, and then put the parts together. . Makes difficult fitting much easier.

@DieselpunkRo Жыл бұрын

Thank you for your advice Stephen

@bossbluff3577 Жыл бұрын

First time I saw Tony sharpen a carpet knife blade I thought he was just being thrifty… and maybe so, then I tried it myself. WHOA! Give those blades a little love on a strop and you can make them RAZOR SHARP!! Much sharper than out of the box! Thanks again, Tony 👍🏼

@TylerSnyder305 Жыл бұрын

I just don't like having to deal with disposing them, so I sharpen my utility knife blades. It's just plain wasteful and potentially hazardous to throw them away.

@tjkoker Жыл бұрын

That was spectacular. I have always wanted to try making a shoe, but was terrified at the prospect. Can't thank you enough for sourcing the sole. I will get started right away. At 65 years old new challenges are greatly welcomed. Thank you again. Cheers!

@joebonomono5078 Жыл бұрын

I make my own belts, wallet, and shoes, its nice having a deeper personal connection to the things I use everyday

@Equus004 10 ай бұрын

Same!!!

@davids.watson7342 Жыл бұрын

Interesting! And now I know why I'm glad to invest a fair amount of cash in a good pair of shoes. 😉 Let's hope that people will start to have more respect for and value the craftsmanship behind the things they buy. 👍

@joseatienza6608 3 күн бұрын

Me encanta lo detallista que es usted para explicar cada paso. Muy agradecido pues soy un aprendiz y su canal me animan a hacer sus trabajos. Gracias de verdad.

@martinburzynski3098 Жыл бұрын

Fantastic. Can’t wait to make them. I would love to see a version with a good year welt so they can be resoled!

@RavensHammer00 Жыл бұрын

Beautiful work, again! Thanks for sharing your expertise with us, Tony!

@gustvansynghel8004 Жыл бұрын

Looks amazing, as always ! wanted this so much to come out, thank you for your designs Tony and the team ! Bought the soles / pattern even before your video came out, couldn't wait !

@lynettejacobs9909 6 ай бұрын

Omygosh thank you so much for this content! Beginner leathercrafter here and I find your video to be so detailed and well-explained. No need to watch hundreds of videos just to grasp the basics😊

@justinsickles4229 Жыл бұрын

I'm super stoked for this! My soles from The Leather Republic are already shipped, so I can't wait.

@adedamolaolajide2939 Жыл бұрын

Tony, you're great. I always love your patterns and I will keep buying your patterns. I would love if you can make simple and easy to follow patterns like this for casual shoes too. Thank you for the great works.

@xolanifaku7870 3 ай бұрын

You are the best teacher I've ever seen, thank you for making this very easy, it's been my dream to make my own pair of sneakers, because I'm designer by training and a musician from South Africa. Keep on inspiring us, I have so much respect and admiration for you. Much love!! ❤

@DieselpunkRo 3 ай бұрын

thank you for the very kind words. best of luck with your music career

@mosesnjorosh9717 Жыл бұрын

I always appreciate you Tony.. thanks for everything you share to us.. keep going

@ChrisLee-UK Жыл бұрын

You never cease to amaze me Tony, just amazing. Also thank you for the pattern. Much love to you and D from me and mine here in Cornwall, England

@davidrenn6897 Жыл бұрын

Fantastic Tony! Really gives me the confidence to make sneakers!

@mgd9151 Жыл бұрын

wonderful video. thank you for taking the time to make it.

@elrico1962 Жыл бұрын

Nice Job. As a former shoe repairman (18 years experience) I would recommend scuffing the sole material with sand paper for a stronger bond.

@frankcastle3827 Жыл бұрын

You did an awesome job!! I usually see people doing the lazy route by just stitching the upper to the bottom outsole...

@GeoffLord Жыл бұрын

Truly amazing- I will make this one of my projects. 😊

@markstuder Жыл бұрын

Cool! I liked how you used everyday tools.

@aliasaka4416 Жыл бұрын

Moooooooore TONY WE NEED MORE OF THAT !!!

@user-ec4jm8zr9o Жыл бұрын

Great style and excellent explanation, thank you

@rastaricky9584 9 ай бұрын

😮That was AMAZING!!! Thank you 🙏🏾

@ricardoquirinopolis Жыл бұрын

absolutelly fantastic

@jbree8456 Ай бұрын

Very amazing looking and definitely looks fun to made

@mirtaferrari4675 Жыл бұрын

GREAT GREAT JOB!!! TONYI LOVE THE WAY YOU MAKE THE SNEAKER😍👋🇦🇷

@dadedubbledee Жыл бұрын

Awesome Awesome pattern Tony

@lanena4397 11 ай бұрын

You are the best man, thanks for this video

@JuanZaldivarJpz 6 ай бұрын

Nice & Clean ........Great Job Sir 🙏🏿

@decanioandres 4 ай бұрын

AMAZING VIDEO BIG THANKS

@mikeciappetta300 Жыл бұрын

Now, this has got to be the most practical design/tutorial yet!!!! Thanks Tony!!!

@dennishillman6205 Жыл бұрын

great video, TOny!

@78jwd Жыл бұрын

Awesome thanks for your time.

@tinajones6313 Жыл бұрын

Thank you so much for this video, I make doll shoes for diffrent size dolls ranging from 9"-24", I sometimes feel like my shoe pattern shape is not correct, bt 4 the ones I am currently creating, they look almost identical to the ones u show here in this video.

@budzillasohoski9858 Жыл бұрын

You’re amazing! What a great video!😊

@Nikodim_K Жыл бұрын

Great work! Thanks for your job! From Russia!)

@wardogdauwdd3020 Жыл бұрын

I love to see you make some old fashioned looking boots I bet that be cool then do a part two video turning the base boot into a steampunk boot

@NagelHausForge Жыл бұрын

What a great video!!!!

@margaretbridgeman4152 24 күн бұрын

Thanks well done !

@jesusmanzanoroman7211 Жыл бұрын

Muy buen trabajo dieselpunk estaría bien que diseñara también unas zapatillas que cubrieran el talón estilo Converse muchas gracias un gran trabajo espero poder comprar tu patrón pronto gracias

@jules75 Жыл бұрын

Hi Tony - Great KZfaq chat today. I would love to go to Marseilles one day, too. Because I'm in California, it would be easier for me to go to Tahiti. My European shoe size is 41.

@piratexs1021 Жыл бұрын

Отличная работа мастер 🔥

@josephgill6322 Жыл бұрын

Tony, I love this! I can't wait to make some for my family. But is there a way for you to make a pattern for a size 13 US? My family has big feet.

@RodricWeiland Жыл бұрын

Awesome video. Can you please tell us more about the glue that you used to glue the uppers to the soles. Exactly what sort of glue do we need to look for? I take it that you can't use that first glue (Fiebings?) that you used to stick the fabric to the leather?

@dreamwarriors979 Жыл бұрын

It gives Pattens form Nike Af1 or Jordan & Ts BUT VERY EXPENSIVE for ONLY ONE SIZE 250€ 🥵 so I say BIG THX TONY for this AWESOME SNEAKERS PATTEN some of my next project 🥰

@hmoataz2011 8 ай бұрын

Thank you❤

@michaelfarias9987 Жыл бұрын

Excellent as always Tony!.. I've been watching you and buying your patterns for years but I keep forgetting to ask you what size and type needles do you use?? I've looked through the John James catalogue but the needles you use seem to be longer than any I have bought.

@suciumarioDIY Жыл бұрын

great stuff thanks a lot

@bigbeefr2959 Жыл бұрын

really love your pattern Tony thx . just a question , you think it is possible to make just one piece with the front and the top pieces ?

@Yezhidze Жыл бұрын

It's... Perfect...

@dantemartinez985 8 ай бұрын

you are a genius!

@robwustyle Жыл бұрын

Love the channel...do you offer patterns for wide feet with a wide toe box. Like barefoot shoes. Keep up the great work

@kbhulett22 Жыл бұрын

Is there a way to use the tall uppers from the loafers pack to make a high top sneaker?

@sergeisviridov5534 4 ай бұрын

Очень просто и интересно, спасибо за мастер-класс. Люблю твой Стиль Тони, иду шить себе снекерсы !

@abhilash8864 12 күн бұрын

Nicely explained good job

@DieselpunkRo 11 күн бұрын

thank you

@abhilash8864 10 күн бұрын

@@DieselpunkRo pattern templet please I would like to try my own

@chainzchainz7757 Жыл бұрын

fantastic.

@juliethompson1460 Жыл бұрын

Making my first pair of shoes, I'm waiting for the adhesive to dry, ( my grandson is almost four and he is helping with a little plastic hammer). I live in Australia and we have a leather processing factory which is open to the public not 15 minutes away, I have kangaroo leather..it's only 1mm thick but really strong and flexible. I'm hoping it works out.

@renumsplav 3 ай бұрын

thank you, bro!😄👍

@DieselpunkRo 3 ай бұрын

Welcome 👍

@zomanzi Жыл бұрын

I am impressed and wondering if you can do a tailor made sneaker for a price? Would love to have a similar one but in white. Tks.

@elptakusa4436 Жыл бұрын

Next do a pair of horse riding shoes, that would be utterly awesome! Tony branded shoes that is a beautiful vision.

@joebonomono5078 Жыл бұрын

Very cool

@AphroditeLee 8 ай бұрын

GREAT!

@eminsahin8301 Жыл бұрын

greetings from Turkey

@nsreentarek3715 Жыл бұрын

Wow love it 😍😍😍What are available sizes in the pattern please?

@thedadchronicles 2 ай бұрын

I love this style! Do you think this pattern would work for a wide toe box shoe?

@florenceodion500 3 ай бұрын

Hi, just saw ur video liked it, I am learning show repair, any tips? Thanks

@katiehughes3173 Жыл бұрын

This video is a godsend and now I'm dying to know when you'll have the size 43 insoles back in stock! Also, does anyone know of or have any leads on where I can get a US men's size 18 (yes, truly!) insole and pattern in this style? My partner could use some well made shoes and really struggles to find anything in his size. 💔

@umeko69 Жыл бұрын

This is cool, can't wait to make one. Can I use suede instead of fabric for the lining?

@DieselpunkRo Жыл бұрын

Yes of course!

@bellathedachshundyip6144 Жыл бұрын

any idea of diy k leather football cleats?

@lourias Жыл бұрын

Do you have any patters for 6-E widths?

@jpjapers Жыл бұрын

Please do a boot tutorial. Ive been wanting to make a pair of boots but there are so few actual tutorials out there.

@blacksouptv4916 Жыл бұрын

Hi Tony is there a 12US Size of this pattern?

@cinevidtv6463 Жыл бұрын

Great video. Surprise to see you resemble to Man City Pep 😂

@briansmith9734 Жыл бұрын

Will you be doing ankle boots too?

@michaelbrubaker4285 Жыл бұрын

I imagine reapplying heat to the sole if it isn't seated sufficiently should help loosen the bond so you can push it down further

@davidwagner6859 Жыл бұрын

Is there any chance you could do the pattern for size US 13? Or maybe a print it a bit larger? If youk now what the scale factor would be, or the measurements on 1 part and I could figure it out from there.

@nated186 Жыл бұрын

I need the same thing, have you figured it out yet?

@blairledger Жыл бұрын

Where do you source your glue from? Its hard to find large quantities of shoe/leather glue

@alexandrsgrind3743 Жыл бұрын

Great tutorial! Thank yoU!

@lm0315 10 ай бұрын

What can you do to add some more cushioning to the shoe?

@austinfisheroutdoors Жыл бұрын

What is a good source for the outsoles?

@joshuamasonseight-bitbasta2451 10 ай бұрын

Every time you pop up I wanna start singing 'Start wearing purple for me nooooooow!' at the top of my lungs.

@alikhalili9218 10 ай бұрын

Hello Please write the site you mentioned for foot size so that we can use it too Thank you

@guillermosantana8892 Жыл бұрын

Hello, I would like to know if leather could be used for Automotive upholstery. I already have the patterns my doubt is that. Thank you

@stephenrobb8759 Жыл бұрын

Yes, leather is used for automobile upholstery . Search youtube for the channels.

@northwestcraft3597 Жыл бұрын

What kind of leather do you recommend for this project?

@BombproofCraftsman Жыл бұрын

What are those little keepers for stitching? The ones you put in the stitch holes to keep your piece in place?

@DieselpunkRo Жыл бұрын

Positioning needles for stitching - www.etsy.com/listing/1415766387

@TJMonster51 Жыл бұрын

What about the sole pad? Did you sew it in?

@done7938 Жыл бұрын

выглядит великолепно, как кроссовки, так и видео

@almclester 4 ай бұрын

Hi Tony. I recently had one of my ankles fused. I have to wear full rocker bottom shoes now. Do you have a source for full rocker outsoles?

@Thishumanis1111 10 ай бұрын

Do you have patterns for sneakers with a wide toebox?

@mammadoff Жыл бұрын

@860smalley Жыл бұрын

What is the method of stitching that you use..I know it seems simple but I'm just learning and don't understand the 2 needle method

@KenCoppola 6 ай бұрын

Great video, I have a question about buying the soles. I wear a 10 1/2 Wide US shoe size. Would that still be a US 10 or do I need to find another sole?

@moonbowy Жыл бұрын

Beautiful Snickers! I bought the patterns but they are way too big for me. A size 37 would be perfect for me 😊

@DieselpunkRo Жыл бұрын

Working on smaller sizes as we speak

@user-vp6hj5uo5c Жыл бұрын

@@DieselpunkRo I would also buy from 37

@michaelbrubaker4285 Жыл бұрын

Any chance of a wide set off patterns for those of us with horizontally challenged feet?

@DieselpunkRo Жыл бұрын

They can be easily adapted to wider feet. Just need to source suitable soles

@nated186 Жыл бұрын

So I need size 47 and patterns only go up to 46. Would increasing the size .5 or .25 work?

@aidanhorne902 3 ай бұрын

What tool can I use to punch out the holes for the shoelace eyelets? Can I just use a larger hole punching device? What size grommets and holes are they?