diecast Restoration this week is this esso tanker this was quite a lot of work plenty of rivets and tyres, and a lot of paint. my contact details are in the about section on my channel
Пікірлер: 164
@davidbaird18982 жыл бұрын
I so enjoy watching your videos. It takes me away from lots of negative thoughts that tend to fill my head. The joy of depression and anxiety. So, thanks for doing what you do.
@martindaredare2 жыл бұрын
Hi David ,iam really glad that it helps my friend and I appreciate your support my friend
@jesterger2 жыл бұрын
What a difference! That is a beauty, Martin. You really outdid yourself.
@martindaredare2 жыл бұрын
Thanks jester iam glad you liked it my friend 😀
@MetalMania3DTV-TAS-AUS2 жыл бұрын
Absolutely beautiful Restoration, just marvelous like it lots, cheers KC 🇦🇺🤝🇬🇧😎🙂✌👍
@martindaredare2 жыл бұрын
Thanks KC glad you liked it my friend 😀
@conorduggan66822 жыл бұрын
I'd forgotten that I had one of these as a young fella. It was a hand me down from my older brother's friend but I remember the mechanism for detaching the trailer and that old tiger logo that Esso used to use. Nice job sprucing it up.
@martindaredare2 жыл бұрын
Cheers conor glad you like it 👍
@MG-id7hl2 жыл бұрын
Those things are monsters Martin....but brilliantly handled. Superb work 👏 👍
@martindaredare2 жыл бұрын
Cheers Mike, thay certainly are heavy, iam glad you liked jt .
@gravesendaustralia2 жыл бұрын
Excellent results Martin nice idea from Nick as well. Cheers Michael
@martindaredare2 жыл бұрын
Thanks Michael my friend
@chrissmith13872 жыл бұрын
Beautiful work, Martin. 👍🏻
@martindaredare2 жыл бұрын
Cheers Chris much appreciated my friend 👍
@marksinthehouse19682 жыл бұрын
I remember them on display on shelves in woolies they are a big model ,I had the corgi major MACk tanker that was too a big model always wanted this one though ,AEC lorries once a common sight right up to the late 70s I think that cab was superseded by the ergonomic cab ,superb job my friend and yes they were heavy old models ,we were lucky as kids to have these but at the time we played with them In mud ,dirt sand etc Friday pocket money fiend to Woolworths or Patrick’s of Fulham if I didn’t quite have enough money my old grandad who I followed onto the post office I would say if I’m good can I have that bless him he would say just like your mum go on get it bless him ,all the best Mark 👍🏻😊
@TheFokker032 жыл бұрын
Ergomatic my friend.
@martindaredare2 жыл бұрын
Cheers Mark, I know the corgi mack version i have the tractor unit but not the tank, good old grand Dad , to the rescue 👍 All the best martin 👍
@buzbygolf2 жыл бұрын
Looks absolutely great as do all the models you do ! Most enjoyable videos! 😊😊👍
@martindaredare2 жыл бұрын
Thanks Keith it means a lot my friend.
@anthonyobersteller15562 жыл бұрын
Great job on the AEC tanker like the hoses that you made up looks good.
@martindaredare2 жыл бұрын
Cheers Anthony, yes the hoses look good . All the best martin 👍
@trevsmith11892 жыл бұрын
Stunning looking model. Keep up the great work. Always a joy to watch your videos. 🇦🇺🦘
@martindaredare2 жыл бұрын
Thanks Trev ,always good to hear from you my friend 😀
@johnnythys74282 жыл бұрын
That was a 'big' but very nicely done job Martin!👌👍
@martindaredare2 жыл бұрын
Thanks Johnny iam glad you liked it my friend 😀
@jrbs2 жыл бұрын
A great looking Dinky commercial vehicle. I've still got mine which I bought new as a kid, still in its box . Great resto job on this one. Radiator grill looks fantastic in black👍
@martindaredare2 жыл бұрын
Thanks very much , still in the box wow that's great . Glad you liked the grill
@connect4glyn2 жыл бұрын
Another beauty done , well done Martin
@martindaredare2 жыл бұрын
Cheers Glyn 🍻 much appreciated my friend 👍
@PaulRestorer2 жыл бұрын
Excellent results Martin. As always professional work Yours sincerely
@martindaredare2 жыл бұрын
Thanks Paul it means a lot my good friend 😊
@deanaustin9965 ай бұрын
Another amazing restoration turned out nice with the details
@martindaredare5 ай бұрын
Thanks very much my friend
@Austeration2 жыл бұрын
Nice project 👍 turned out pretty cool. Great job
@martindaredare2 жыл бұрын
Thanks very much its really appreciated my friend 👍
@davidwelch67962 жыл бұрын
Ignoring the stickers as work in progress, a cracking restoration with wonderful detailing. I think you should put a Binns Road street sign on your shed door.
@martindaredare2 жыл бұрын
Thanks David , if I could get a sign i would definitely display that on my shed door . All the best martin 👍
@MatchboxResurrection2 жыл бұрын
Great job Martin. Looks stunning mate
@martindaredare2 жыл бұрын
Cheers Juan , I hope your well my friend 😀
@SoMoDiecast2 жыл бұрын
Nicely done restoration on the tanker Martin. The details are great!
@martindaredare2 жыл бұрын
Cheers Ron 🍻 much appreciated my friend 👍
@tonyhawkridge92012 жыл бұрын
Hi Martin, great video, l really enjoyed watching this one ! I have done a couple of these AECs and they have turned out well just like yous has ! Looking forward to the next next one (lorry) l only do lorries because I don’t have room for anything else ha ha, well done. Regards Tony.
@martindaredare2 жыл бұрын
Cheers Tony, iam glad you liked it my friend 😀👍
@LaziLowcollectables2 жыл бұрын
Very nice finish Martin ,huge tanker ,nice details, I think you're right, decals are far better ! Great Dinky lorry ,5 star job
@martindaredare2 жыл бұрын
Cheers laz ,it was good to see you Friday 👍 glad your all good
@glynstimpson2 жыл бұрын
Hello Martin it’s nice when you have a model that looks like it should be scrapped then. turn it into some thing that looks brand new great restoration. You are right about the transfer s hope you and your family are keeping well regards Glyn
@martindaredare2 жыл бұрын
Thanks Glyn for the kind words it means a lot my friend 😀
@yayasgaragecustomdiecast71982 жыл бұрын
Wow! Incredible work on this one, love it!
@martindaredare2 жыл бұрын
Thanks very much its really appreciated my friend 👍
@peterrichardson56642 жыл бұрын
Love your restorations Martin.
@martindaredare2 жыл бұрын
Thanks Peter it means a lot my friend
@RoadRunnergarage85702 жыл бұрын
Impressive detailing job!
@martindaredare2 жыл бұрын
Thanks very much Thomas 😀
@johnnyvscustomsgaragetassie.2 жыл бұрын
Nice Job Martin, Clever idea about the hoses too. Cheer's JV
@martindaredare2 жыл бұрын
Cheers Johnny, glad you liked it my friend 😀
@hellboy19592 жыл бұрын
Brilliant Martin, I do do love these large scale trucks cracking job mate !
@martindaredare2 жыл бұрын
Cheers Neil, i really appreciated it my friend 😀
@esotericman222 жыл бұрын
Grand job that old boy. Grand job!
@martindaredare2 жыл бұрын
Thanks Glen much appreciated my friend 👍
@anthonywallace85342 жыл бұрын
Another fine model well done
@martindaredare2 жыл бұрын
Thanks Anthony its much appreciated my friend 👍
@diecastflashback33312 жыл бұрын
Great job, detailing awesome 🍻✌️
@martindaredare2 жыл бұрын
Cheers Don glad you liked it
@pfsmodellingprojects2 жыл бұрын
'Gonna need a bigger turntable Martin 😉 Great job as always, like the detailing on the radiator, nice touch..
@martindaredare2 жыл бұрын
Cheers MR P, the old battery's were certainly struggling on this one 😀 All the best martin 👍
@peterhoughton15892 жыл бұрын
Wow, what a fantastic restoration Martin, once again your detailing is superb. I have one of these AEC tankers, I bought it cheap on ebay a couple of years ago, it needs 2 cab doors if I remember correctly. I'm waiting until I improve my restoration skills a bit more before attempting it. Another great video, thanks for sharing your skills again. All the best. Peter.
@martindaredare2 жыл бұрын
Cheers Peter, nothing wrong with your skill Peter from what I have seen ,you never know till you try my friend. All the best martin 👍
@briansdiecastthailandstoth67472 жыл бұрын
Great work Martin looks Fantastic...
@martindaredare2 жыл бұрын
Cheers Brian, much appreciated my friend 👍
@2H80vids2 жыл бұрын
As always Martin, it's all in the details and this one turned out beautifully. The stickers look OK but I can understand you wanting to replace them with transfers. The headlights looked great on the roundabout at the end, reflecting the light like they were meant to; it really looked like they were lit. That simple trick with the curtain wire looks excellent too, especially with the white rivet bunged in the 'ole.😁👌
@martindaredare2 жыл бұрын
Thanks very much , I put some tamyia clear orange behind the lights to see what the results were ,iam pretty pleased with them , the wire just finished it of . All the best martin 👍
@2H80vids2 жыл бұрын
@@martindaredare Ooh, I didn't realise you'd painted behind the jewels - very effective. At the moment, it looks like they're very dimly lit, like sidelights. I wonder, if you added a wee bit of yellow to the mix, would they look more like dipped beams? It's certainly one of the best effects I've seen on headights - well worth fiddling/experimenting with.😁
@Collectorholic2 жыл бұрын
Great job. Looks amazing!
@martindaredare2 жыл бұрын
Thanks very much its really appreciated my friend 👍
@Collectorholic2 жыл бұрын
@@martindaredare You got it buddy.
@chrisparkinson13512 жыл бұрын
G'day Martin great resto as always. I can hear the frustration in your voice regarding the stickers. To be a real stickler for originality the paper ones are correct, but decals will be so much nicer. All the best, stay safe. Cheers Chris 🐨👍🏻🏁🇦🇺🍻
@martindaredare2 жыл бұрын
Cheers Chris, it was a bit frustrating but hopefully get some decals soon ,and your dead right the original ones were stickers All the best martin 👍
@austingreenough63962 жыл бұрын
Hi Martin,Wow,what a great restoration . It looks like a brand new model. I have a similar model only mine has Shell livery. Thanks for your video Martin.
@martindaredare2 жыл бұрын
Thanks Austin I'm glad you liked it 👍
@steveherschell44712 жыл бұрын
Excellent Martin, as you know I've done quite a few of these. I've got two more on the go at the moment and I'm doing something a little different with them. I will post the end result on the DMC group page. The worst thing doing these for me is pinging them axles over. All the best mate.
@martindaredare2 жыл бұрын
Cheers Steve, I know you like your trucks and lorrys, these are a lot of work ,like you say the axles are pretty tough to peen over . All the best martin 👍
@popsreclamationstation25422 жыл бұрын
Looking awesome buddy 👍🏻📸 Great detailing! 🤗 I’ve bought and sold a few of those… Right now I have the tanker but no cab! 🤔 Haven’t found a replacement here yet. Cheers mate 🍻😎🇨🇦
@martindaredare2 жыл бұрын
Cheers Lawrence, thay are definitely a smart rig when clean up . Thanns for the kind words my friend 👍
@leegoldeneagle90032 жыл бұрын
Sorry for being late today as u said summer is coming so got to get at now will always watch your channel Lee
@martindaredare2 жыл бұрын
Hi Lee, no worries my friend you go and enjoy the good weather i will always be hear .
@Jeffsmodelgarage2 жыл бұрын
Great job on the tanker Martin looks great
@martindaredare2 жыл бұрын
Thanks Jeff iam glad you liked it 👍
@mickkeen12942 жыл бұрын
Very nice resto Martin. Wow a lot of work involved with this like you say lots of rivets and tyres! Always thought this model was very underrated, so glad you did this a true favorite of mine and I do have one too. See you next time!
@martindaredare2 жыл бұрын
Cheers Mick , I would say it might have been the all white colour that made it a bit bland for youngsters but a good model all the same . All the best martin 👍
@stevenjones39922 жыл бұрын
Very nice restoration Martin! I really enjoy the larger vehicles and the way they are assembled. Turned out exceptional! Thanks for sharing !!
@martindaredare2 жыл бұрын
Thanks very much Steven it means a lot my friend 😀
@Btech44012 жыл бұрын
Beautiful restoration. The fine detailing is really well done. 👍
@martindaredare2 жыл бұрын
Thanks John ,its really appreciated my friend 👍
@PBsRetroRestorations2 жыл бұрын
I was considering my legal options for a second when you said “crackin’” but then I got a shout out so I’ve let it go on THIS occasion. Oh yeah, lovely work as always Martin. Ps. Love that fuel tank mechanism for getting the tanker off.
@martindaredare2 жыл бұрын
Sorry sir it just slipped out ,I will do a 100 lines I must not nick pb s sayings. 🤣🤣🤣🤣 all the best martin 👍
@kaywalker44332 жыл бұрын
this tractor unit has one of my favourite faces of all dinky s and corgis
@martindaredare2 жыл бұрын
Cheers Kay ,yes its certainly got an interesting face . All the best martin 👍
@ianb64152 жыл бұрын
Hi Martin this was a biggy, I'd have screwed the base on so you got somewhere to hide the biscoffs . Nice job and the Tiger on the tail made it turn out "GRRRRRRRREAT". All the best from Ian b & family.
@martindaredare2 жыл бұрын
Yes like your idea fo hiding my munches. Should have put a long furry tail on the back , all the best martin 👍
@BelgianDiecastRestorations2 жыл бұрын
Beautiful restoration! I have the one from my childhood already disassembled and stripped. Might attempt a restoration soon. Mine is a later version, with a plastic tank, which is held with two screws instead of rivets.
@martindaredare2 жыл бұрын
Thanks very much for your kind words. 2 screws thats better. All the best martin 👍
@curtisarmstrong65212 жыл бұрын
Looks fantastic Martin despite the sticker problem…I would love to see how you pean the axles over…🇨🇦
@martindaredare2 жыл бұрын
Cheers Curtis, I will do a short video on the subject soon 👍
@ian11042 жыл бұрын
Nice job Martin, I did one a few months back and i clear coated over the top of the paper stickers because i thought they might fade.
@martindaredare2 жыл бұрын
Cheers Ian, I did mine but it bubble up a bit that was my fault to much clear coat 😅 all the best martin 👍
@2ndchancediecastrestorations2 жыл бұрын
Lovely job A++
@martindaredare2 жыл бұрын
Thanks very much its much appreciated my friend 👍
@19dutchie492 жыл бұрын
Beautiful restoration Martin, I love the big rigs. I have only just started watching your channel and am impressed. Awesome job.
@martindaredare2 жыл бұрын
Thanks Tom it means a lot my friend 😀
@diecast_MikeEspo2 жыл бұрын
Great work as always. SOOOOO KOOOOOLLLLL . 👍👍👍👍👍👍👍👍😎😎😊
@martindaredare2 жыл бұрын
Cheers Mike it means a lot my friend
@MOS6510Models2 жыл бұрын
Looks brilliant mate.. decals as you say would be better :)
@martindaredare2 жыл бұрын
Thanks les , much appreciated my friend 👍
@ianhow1002 жыл бұрын
Reminded me of the late Mike Reid & the ugly duckling. Look at my new white whistle & flute. Neat resto Martin. Also remember the tiger in the tank ads. Plus the tiger tails you could tie on to your petrol pipe
@martindaredare2 жыл бұрын
Cheers Ian I to remember those days 😀 Thanks very much 😀
@tonyhughes1958able2 жыл бұрын
Looks great now Martin.
@martindaredare2 жыл бұрын
Thanks Tony ,much appreciated my friend 👍
@septiccalling83412 жыл бұрын
Very smart 👍🏻👌🏻👏🏻 Shame about the stickers but it’ll be nothing for a man of your calibre to sort out 😉.....I always far prefer decals........ Looks really good, even if you’re not completely happy!
@martindaredare2 жыл бұрын
Thanks my friend, its all in hand now I have someone on the case. Glad you liked it All the best martin 👍
@crapaudnicksdiecastrenovat17392 жыл бұрын
Beautiful restoration Martin, I do love these AEC’s, I’ve yet to do one in the Esso version, I had bought the stickers like you but they really are crap so I won’t be using them! As always, your detailing is the tops, a really superb job! 11 out of 10 from me👌👍😊 Take care, all the best, Nick.
@martindaredare2 жыл бұрын
Cheers nick , yes I did like your one a bit more colourful.then mine and a great tip for the pipes.
@RustyTriumphs2 жыл бұрын
Looks very good👍😎
@martindaredare2 жыл бұрын
Thanks very much its really appreciated my friend
@williamdibruno28472 жыл бұрын
glad to see you again
@martindaredare2 жыл бұрын
Cheers William, good to hear from you and thanks for watching my friend 👍
@derrickroe97912 жыл бұрын
Looks great Martin....such a shame that the stickers didn't come up to your standards
@martindaredare2 жыл бұрын
Thanks Derrick, yes just was a shame about the stickers, but I will get it sorted All the best martin 👍
@TheFokker032 жыл бұрын
Nice resto Martin.I have one,hooked up to a Ford Transcontinental cab (Corgi),although i may change it as i now have a spare AEC cab.Talking of cabs,on the Dinky casting,this cab is based on the Mercury 5 cab,only thing is,they missed out the screen divider bar.The tank on the other hand,is,as far as i know, a generic unit.Corgi on their tanker,use a design based on the real Gloster-Saro tank.I can't recall where i got my Esso transfers from,but i agree,those stickers can be a bit of a nightmare.Look forward to your next resto.All the best.
@martindaredare2 жыл бұрын
Great information there my friend 👍 I did notice when looking at Google images that some had a front screen devider , I will have a go at doing that on my next cab of the same type. All the best martin 👍
@thescalemodelcarguychannel86812 жыл бұрын
Martin I really love it brother and I like the Esso livery!
@martindaredare2 жыл бұрын
Cheers Shuan, sorry for the late reply but I have been really busy this week . All the best martin 👍
@jeffbaker28972 жыл бұрын
Excellent restoration work Martin, love the detailing on this model, surprisingly it sure was a lot of parts connected with this particular truck & tanker trailer, very interesting restoration, enjoyed it. 👍 My friend you take care, stay safe , see ya on your next restoration. 👋😎🚗🚙🚎🚚🚛🚒
@martindaredare2 жыл бұрын
Thanks Jeff ,there was a lot of work but worth it in the end,all the best martin 👍
@GrahamFoulston2 жыл бұрын
That was a great restoration Martin (as normal!) and the end result looked amazing, nice one! 👏👏👏. Cheers for now mate. …………Graham
@martindaredare2 жыл бұрын
Thanks Graham its really appreciated my friend 👍
@RestoDudes2 жыл бұрын
Way to put a Tiger in it's Tank! Martin, Looks fan!tastic M8
@martindaredare2 жыл бұрын
Thanks very much it means a lot my friend 😀
@frasermartin67282 жыл бұрын
I love watching you on the detailing, Martin - such care and patience, and a terrific result as usual! The tractor opening was a surprise - quite complex for what could have been a simpler connection between the chassis and cab unit. Looking at my Leyland Beaver, I see that I have MUCH more work to do than even that complicated AEC. Send me a box of your patience, please! Great job again! If you cannot find decals, Ian Treadgold at BlackSquare will make them for you!
@martindaredare2 жыл бұрын
Thanks fraser for the kind words my friend it means a lot. All the best martin 👍
@geoffmower87292 жыл бұрын
Hi Martin that turned out all white. 😂🤣 Just an idea if you want it to turn on the magic better you should take the petrol out first.😅😁😋 In all seriousness excellent job mate it looks just out of the box. As you say it's a pity about the stickers decals always look better but at least they are better than nothing. This vehicle would come in handy at a rock concert or sporting event with those six toilets on the top......Sorry sorry couldn't help myself.😄😁Catch you on the next one mate and I promise to take my medication before I watch it lol.👍👍
@martindaredare2 жыл бұрын
Hi Geoff blimey your on form my friend, toilet seats made me chuckle 😄. Sorry for the late reply been flat out all week . All the best martin 👍
@kimlidster8912 жыл бұрын
Very nice .
@martindaredare2 жыл бұрын
Thanks Kim much appreciated my friend 👍
@sandyhallyburton8892 жыл бұрын
top tip - leave the tanker caps in place until you split the tanker and they can be popped out easily from inside
@martindaredare2 жыл бұрын
Cheers sandy I should have thought about that 😀 top tip definitely 👍 All the best Martin
@sandyhallyburton8892 жыл бұрын
@@martindaredare another thing I found when using paper sticker decals ( and any decals to be honest) is to put them in the paint before the clear goes on, gives a really seamless finish.
@martindaredare2 жыл бұрын
Thanks again sandy for another great tip 👍
@kaywalker44332 жыл бұрын
really nice job...love the detailing as always very well done. and the gas pipeline. just genius, how the f***k did you think of that...lol
@martindaredare2 жыл бұрын
Thanks kay ,its much appreciated my friend 👍
@janganlupasubstc2 жыл бұрын
Very nice
@martindaredare2 жыл бұрын
Thanks very much its really appreciated my friend 👍
@bobkirby26032 жыл бұрын
Martin, well done ok your not happy with your sticker's, but I would have been happy for that. Only a few little dots as my wife says if they look that closely they shouldn't be so nosey 😂. When your talking and doing the work I can't do that I go quiet as thinking watching what I'm doing ,one of the skilled men that taught me could do that one was a good artist some of his work but he would not sell any, I digress but glad you can do it as I like to watch the master. What did you do before retiring early. Be good stay safe and send our best wishes to the lady in doors. Hope your work is going well. 👍👍🙏.
@martindaredare2 жыл бұрын
Cheers Bob for the kind words my friend,.I worked on building Diesel engines for 12yrs before retirement. All the best martin 👍
@ralphcooling75832 жыл бұрын
Hi Martin great video on the Esso tanker your stickers I keep peeling off at the top have you thought of trying some Pritt Stick just a stick the edge down . There is a guy on KZfaq called toypolloi and uses Pritt Stick on some of the toys he got where the edge of the sticker pills up hope this helps mate. Ralph
@martindaredare2 жыл бұрын
Cheers Ralph, that's not a bad idea, never thought of that 👍 All the best martin
@mylespovey2 жыл бұрын
Superb Martin, I absolutely love the lorries and plant stuff. What is the turn table called and where can I get one from?
@martindaredare2 жыл бұрын
Thanks my friend, I got the turn table from amazon, most modeling shops will have them just a battery opp display stand . All the best martin 👍
@uncleminty81442 жыл бұрын
Excellent work once again, I have the same truck with a flatbed trailer. Can you advise me on what to use to put the head lights back in please.
@martindaredare2 жыл бұрын
Cheers uncle, yes you can use ,pva glue it drys clear , and won't cloud the glass . I hope this helps. All the best martin 👍
@uncleminty81442 жыл бұрын
@@martindaredare thank you Martin, I will have a go. Keep up the excellent work.
@user-mo3ud4fs2x2 жыл бұрын
замечательная реставрация, однако мастера на всех каналах не зачищают почему-то облой после отливки. От этого модели выглядят недоделанными.
@martindaredare2 жыл бұрын
Thanks very much its really appreciated my friend 👍