1/150 DIY Micro RC Truck & Trailer

Рет қаралды 9,131,283

Жыл бұрын

I modified TOMYTEC 1/150 scale "The Trailer Collection" into a radio control car.
The motors are LA4-466FB for both steering and running.
Wireless communication is done with two RN4871U (Bluetooth module).
RN4871U must be set up for communication before assembly.
Wireless communication from trailer head to trailer is infrared remote control.
The transmitter is built on the breadboard.
The microcontroller used is ATmega88V for the transmitter, ATtiny3217 for the trailer head, and ATtiny412 for the trailer.
The power supply for charging the trailer head is DC 5V.
I omitted the trailer charging circuit.
The grid of the cutting mat in the video is 5cm square.
TOMYTECのトレーラーコレクションをラジコンに改造しました。
モーターはステアリングも走行用もLA4-466FBを使いました。
無線通信は2つのRN4871U（Bluetoothモジュール）で行っています。
RN4871Uは組み立てる前に通信の設定をしておく必要があります。
トレーラーヘッドからトレーラーへの無線通信は赤外線リモコンです。
送信機はブレッドボードに組みました。
使用したマイコンは送信機がATmega88V、トレーラーヘッドがATtiny3217、トレーラーがATtiny412です。
トレーラーヘッドの充電用の電源はDC5Vです。
トレーラーの充電回路は省略しました。
動画中のカッティングマットのマス目は5cm四方です。
----------------------------------------------------------
【FAQ】
[Q] Can I sell your artwork?
[A] I often remove small parts from my creations to reuse in future pieces, so most of what I make no longer functions properly and therefore cannot be sold.
[Q] Won't exposed copper wire short circuit?
[A] The wire is an enamel wire (magnet wire) coated with insulation material on the surface, so it doesn't short circuit.
[Q] Where did you buy the parts?
[A] I often buy electronic components from the online stores of "Akizuki Denshi" or "Marutsu". Additionally, I disassembled a large quantity of junk digital cameras that I acquired from Yahoo Auctions and picked up stepping motors, gears, shafts, photosensors, ultra-small switches, and other components.
[Q] It looks like there are no marking-off line, but are you processing everything by eye?
[A] It's hardly visible on the camera, but I mark them with a needle or cutter.
[Q] Why don't you make printed circuit boards?
[A] Since I'm not mass producing, it's quicker to use universal boards. Also, to make it smaller, I sometimes have to modify the pins of SOT or SOP packages and solder them, which is difficult to do with a printed circuit board. Also, it's common to change electronic components after testing, so a universal board is easier to work with.
[Q] It's difficult to solder chip components even with a loupe, but you do it well.
[A] I solder with a microscope.
[Q] I was disappointed because I thought even the power windows and wipers would work.
[A] Please give me a break...
[Q] How long did it take to create it?
[A] It took several months.
[Q] Can you tell me the cost of materials?
[A] Since I use a lot of parts and junk parts that I already had, there are many items for which I do not know the price.
[Q] Please make a drone.
[A] I do not have the knowledge to make a drone, so I cannot make one. Even if I could make one, I cannot think of any differentiation from those who are currently making drones.
[Q] Please make your micro RC car drift.
[A] As the car gets smaller, it's already a challenge just to make it run normally, so there's no room to make it drift.
[Q] Please make the model run faster.
[A] It is difficult to make a small model run slowly, so I intentionally run it slowly. Also, I do not make it run faster because it would look too toy-like and lose realism. Additionally, if the model is driven by a stepping motor, it cannot run faster.
[Q] Please modify a Hot Wheels.
[A] Since many other people are already modifying Hot Wheels, I currently have no plans to do so.
[Q] What is the development environment for microcontrollers?
[A] I write programs in C-language using Microchip Studio 7.0 and run them on AVR microcontrollers.
----------------------------------------------------------
【Circuit Diagram】
[Transmitter]
drive.google.com/file/d/19NR9...
[Trailer Head]
drive.google.com/file/d/1yxN9...
[Trailer]
drive.google.com/file/d/1vKAv...
【Program】
[Transmitter]
drive.google.com/file/d/1pmnC...
[Trailer Head]
drive.google.com/file/d/1K1Y3...
[Trailer]
drive.google.com/file/d/1OmdN...
【twitter】
hashtag/_SuperGre...
【Setting up RN4871U】
search?q=%23_smar...
【Music】
Broken - Patrik Patrikious
.

Пікірлер: 3 200

@Friendroid Жыл бұрын

The video really shows all the work it took to make this micro piece of art. The precision and how clean it looks is admirable.

@moomoomeadows7526 Жыл бұрын

he left a lot out, like the joining of the front steering system and the drive motor, it does not just decide to stay there

@426wookie Жыл бұрын

I can't even imagine how much measuring is going on to make this

@moomoomeadows7526 Жыл бұрын

@@426wookie you would think a lot, but I don't fully believe it is all hand crafted, half was probrally done my a robotic arm

@thereinthetrees_5626 Жыл бұрын

@@moomoomeadows7526 a robotic arm 💀 Who the fuck do you think this guy is? GM? This is definitely hand made with store bought parts

@moomoomeadows7526 Жыл бұрын

@@thereinthetrees_5626 he could have dissasembled a couple of cheap toys and sprinkeld a hint of editing and made lie stew. also yes, a "robotic arm 💀" could have done that. this was most likley fake, but if it was real I apollogize to the guy for thinking it was not hand crafted. that steering system screamed fake to me because it is big and thin, it would also need perfect parts to work well, and a couple other things make me think there is a chance it is fake, however it could be real.

@zUltraXO Жыл бұрын

The fact that you can signal a turn is mindblowing

@KermitDaOG Жыл бұрын

Honestly like wtf 😂

@DualDesertEagle Жыл бұрын

@@KermitDaOG As far as I understand it does that whenever u steer left or right far enough.

@divraj_doimari Жыл бұрын

@@DualDesertEagle good observation

@conancorcoran5367 Жыл бұрын

@@DualDesertEagle I think that it’s activated by a button, check 8:14, you can see them on the top right of the remote

@DualDesertEagle Жыл бұрын

@@conancorcoran5367 Looks like ur right, when he drives around the 2 bottles of paint he's signalling right long before he starts turning right and keeps doing so regardless of steering angle.

@Kerosene682 Жыл бұрын

the fact that it includes all the original body pieces and even functioning lights there's such an incredible amount of attention to detail and the functionality makes it all the more crazy it's all custom made with so much precision and uses every single millimeter of space I also love how much control there is, and the maneuverability is awesome huge props

@NLvideomaster Жыл бұрын

While a hobbyist might not appreciate this comment... I'll still say this. As a kid I'd have given my soul for a truck like this. I used to play for HOURS with little cars and road sets and all that. The attention to detail, turn signals, brake lights, dim lights, it's AMAZING!

@youssefmarouani2603 Жыл бұрын

The slow acceleration and rotational speed of the front wheels to change direction is very realistic, unlike some other rc models that vary in speed very boyishly...👍

@kennyc587 Жыл бұрын

Yes its quite interesting how the steering is achieved. However I do wonder how the motor stops running constant once it hits the limit. Is it coded to detect resistance? For example if I were to just keep doing donuts will it hurt the motor.

@jetjazz05 Жыл бұрын

Crazy to think a hobbyist with understanding of their goals is able to outdo a mass produced item. I've never understood why there can't be one guy on the r&d team for these companies to make products that rival what hobbyists can do, but I guess that's the thing you run into when the bottom dollar is more important than the product.

@tomozex Жыл бұрын

@@kennyc587 probably hardcoded max number of rotations measured with the phototransistor at 3:22, but you could do just what you are talking about with a reed switch somewhere in the motor circuit

@EchoBuildsThings Жыл бұрын

@@kennyc587 they show two more photoresistors at either end of the rack, so using that i guess

@Ezio470 Жыл бұрын

@@jetjazz05 There's much more work required for a toy that is to be mass produced. But there are some which are mass produced, the TURBO RACING C72 for example is a good one. The market is very niche tbh and does not justify the R&D costs sometimes. At the end of the day what sells most is the cars that drives fast and drifts and that's where most companies chose to invest. If this guy somehow is able to make his own circuit boards and give the schematics, then i guess it would be easier for other people to build one themselves with easier soldering.

@alzack112 Жыл бұрын

You know what's more amazing than your precision? It's your patience to work with this.

@bloody_vengeance Жыл бұрын

And the fact he is slow and steady with the tiny parts

@darklinck4649 Жыл бұрын

😢😢😢😢

@jonjonsonDp 11 ай бұрын

🤔

@mshandilya97 7 ай бұрын

🎉km r

@rokiizumi Жыл бұрын

「いいね！」じゃ足らない。星5つ！　素晴らしすぎる。

@Ni5ei 4 ай бұрын

What a piece of craftmanship! Awesome job. The only thing missing is the beep signal when in reverse 😜

@kandredfpv Жыл бұрын

What amazes me is how much gear and wiring you were able to fit into that tiny truck chassis. When I saw you adding those led lights I was thinking, gee that's an overkill, but in the end they helped with the realism. It really did look like you'd just shrunk down a real semi and trailer. You are a master craftsman!

@SadLoiF786 Жыл бұрын

Please give me one truck 🚒

@philiphatfield5666 Жыл бұрын

Brilliantly stated.

@kalimagik4574 Жыл бұрын

When you did that turning manuver on your laptop that was soo cool because thats how us truckers do it in real life when we are short on space at a warehouse or a dropyard. Really cool i love this 100%. The only thing that could make this even cooler is if you built a mini warehouse with mini forklifts that could load and unload the back of the trailer. your an amazing craftsman and engineer well done!

@weirdfkit Жыл бұрын

Yeah look who says a believer

@zynifi Жыл бұрын

@@weirdfkit ??

@gbresaleking Жыл бұрын

And loading ramps to back up to , and maybe technical areas of the parking lot and he could set missions for himself like make it past the broke down car and roadwork in parking lot to loading ramp 6 to offload goods then make way back out to next delivery

@jetcyclezero8907 Жыл бұрын

Much more fun to watch than the 200+ mph RC's on a runway.

@rcdoebbora8086 Жыл бұрын

Amazing mini RC ❤️

@TheBypasser Жыл бұрын

Awesome build! The only thing I'd add (though I doubt it would have enough space to fit in the truck) is a wireless power receiver. Charging the thing off a tiny gas station would be the kill!

@sheilaolfieway1885 Жыл бұрын

maybe to charge the trailer battery.

@Ezio470 Жыл бұрын

yeah. could make a tiny prop 'gas pump nozzle' using the micro DC plug that old nokia phones used. I think the creator of this micro rc has all he needs to make one.

@DanDan-li4hr Жыл бұрын

add speakers somewhere so it can produce actual engine and break sound

@yahiaaymen7876 Жыл бұрын

@@sheilaolfieway1885 I was about to say the same thing

@drache444444 Жыл бұрын

i mean, theres the lines going from truck to trailer irl. you'd lose the ability to unhook the trailer, but it should be doable

@alessandrotorboli3782 Жыл бұрын

What surprises me the most is the lighting, it's absolutely magnificent! 😍

@macksuting6263 Жыл бұрын

True it makes it look more closer to the real thing 👌

@spiff311 Жыл бұрын

Me too

@mattsadventureswithart5764 2 ай бұрын

Not only did you create something fabulous, it looks like a lot of fun to play with!

@thetinysideoftiny7625 4 ай бұрын

INSANE MICRO-ENGINEERING!!! WOW!!

@nezvanova_ Жыл бұрын

This is insane, as a freshman in electronic eng. it's exactly the type of project I was idealizing. Thank you. An amazing work.

@regab4786 Жыл бұрын

I have any knowledge of electronic or anithing related but I would like to learn how to to something like this. What would You say I need to learn Ford doing something like this proyect?? And You think is it possible someone like me could be able to do it?? At the end I know it deppends on how much effort I put on try to do it and learn. I hope You stay well, and My apologize in advance for any English mistake cause I'm not a native English speaker.

@vennox1598 Жыл бұрын

@@regab4786 no i dont think you will be able to do it

@Das_Soham Жыл бұрын

@@vennox1598 tf is wrong with u

@Das_Soham Жыл бұрын

@@regab4786 there is nothing u cant do .. just work on it and one day u will be able to do it

@schrodingerscat1863 4 ай бұрын

@@regab4786 There are many tutorials online covering this kind of thing but it isn't something for a beginner, just building the basic circuit on a breadboard would be difficult for a beginner never mind the microcontroller programming and miniaturisation, which shows some excellent soldering skills. If you really want to learn I suggest following some tutorials for this kind of remote control, build up the circuitry on breadboard. Then when you are comfortable with that you could consider building something up on perf board like in this project. It will be a steep learning curve in the beginning though.

@msmith2961 Жыл бұрын

Dude is *ridiculously* good at making these real life micro machines

@makik3762 3 ай бұрын

Agreed. I do HOe mini layout and am totally impressed by this!

@maybe138 2 ай бұрын

Some KZfaqrs can do those bad ass things, imagine what a government can do...

@djmaury Жыл бұрын

Every time I look at this genius and his luminous creations I really want to cry, to see so much art and that he can't do something for those of us who are collectors willing to pay regardless of the cost of his ingenious work, and not leave your contact for to be able to negotiate, well the saying goes! Money can't buy everything, it's not fair.

@user-ps5qd8cd7e Жыл бұрын

細部へのこだわりと、このサイズに収めてしまうのが凄い。

@rsz90182 Жыл бұрын

Man, this is really the far side of KZfaq that I end up watching at night. This blows my mind!!!

@YazanCh 2 ай бұрын

200k Subscribers are NOT enough for this art work

@_hanz73 Жыл бұрын

I really thought that he was going to put most of the parts into the trailer but no he somehow managed to put all the main stuff into the truck itself, Amazing!!

@GO-yf3qo Жыл бұрын

すごすぎるジオラマに欲しい。

@adamdaman2760 Жыл бұрын

KUNG fu panda

@ahmadovemil Жыл бұрын

@@adamdaman2760 😂

@angryman9333 Жыл бұрын

@@adamdaman2760 haha

@CopperCreeps Жыл бұрын

このトラックが欲しい

@a6m142 Жыл бұрын

欲しいんだが

@jkormath Жыл бұрын

You have a very steady hand, and the precision with which you work is mind boggling 👍👏

@abdullahafraheemkhan858 8 ай бұрын

his electric components get more complex every time, you got some talent

@882952 Жыл бұрын

Wow, just WOW. This is incredible work. I could reproduce something like this in a more reasonable scale, but never in such a tiny form factor. The frustrations of moving around these tiny parts, trying to solder the tiny wires, lining up and fitting all the tiny tiny tiny components... I would have destroyed the thing in a fit of frustrated fury ten minutes into the project. And the details - it not only steers but it's PROPORTIONAL steering! And turn signals - freaking TURN SIGNALS, lol!!. You are a technical artist. Thanks for sharing this joyful little creation, it was very cool to watch the build process. Can't wait to look through your other vids now. =)

@juarezcampos9779 Жыл бұрын

Haverá sempre algum ser humano com uma habilidade inimaginável a ponto de nos surpreender. É realmente admirável seu trabalho, parabens!

@nayarafranca3485 Жыл бұрын

7x1

@daleyy1324 Жыл бұрын

há 7 anos

@esdrathelink720 Жыл бұрын

@@nayarafranca3485 1945

@jhaysonarmiellachanibre5075 2 ай бұрын

he knows technology more than us

@user-xy5le7qi2p 2 ай бұрын

Этот человек действительно делает то что он любит и умеет, респект👍

@allthingsgilmour Жыл бұрын

This man should be extremely proud with the amount of work, skill, knowledge, and craftsmanship put into this truck! You have my admiration sir!

@ankanpradhan9724 Жыл бұрын

Hats off to this man 😳⚡😱 absolute legend

@honeman 11 күн бұрын

The fact this guy show all his trucks function after making it in a proper time slot was good

@ashpjangde Жыл бұрын

A masterpiece. The amount of hardwork you've put in it is truly amazing.

@dampflokdrei Жыл бұрын

My comment is just two words: absolutely amazing. I have never seen a RC truck as small as this one.

@Giddykippa65 Жыл бұрын

thats just mind boggling how you can fit all that into something so tiny and the soldering of those tiny wires just wow you are amazing

@ketanpethe5982 Жыл бұрын

यह कहना उचित होगा कि इसमें से काफी कुछ 3डी प्रिंटेड हो सकता है, और यही मैंने भी सोचा था, लेकिन जब आपने हाथ से छोटे घटकों को स्थापित करना शुरू किया, तो मुझे वाकई में बड़ा आश्चर्य हुआ। बोहोत बढ़िया! 👏

@indiocabuloso157 Жыл бұрын

O roncadinho do motor é show! Bela obra de arte! Que continue fazendo projetos maravilhosos como esse.

@lilguygamingandmore Жыл бұрын

who knew you could jam pack so much into such a tiny toy with the art of micro electronics. This dude even got the turn signals! Kind of a large controller for such a tiny toy, but very impressive work!

@DJaquithFL Жыл бұрын

Okay .. I'm going to stop complaining about wiring my new PCs Fans & LEDs. You with all that space would have a PC factory inside the confines of the case. I'm thoroughly impressed! 👍🤯

@ogamingscv Жыл бұрын

I am so impress with the small form factor you worked with! And the lighting, head lights, indicator lights, hazards, reversing and even break lights for deceleration?! Crazy! Absolute work of art! Keep it up :D

@AKA_TYRANT 18 күн бұрын

Here comes Truck-Kun

@bretknight408 Жыл бұрын

Such an incredible piece of work that clearly shows the intricacies applied in creating such a work of art and mechanics all rolled into one.

@microbuilder Жыл бұрын

Using a photoreceptor/reflector as the servos potentiometer was a genius micro move, great build!

@lxst7602 Жыл бұрын

If you don't mind, could you explain its purpose.

@pascha4527 Жыл бұрын

@@lxst7602 find the center of the direction.

@nafief Жыл бұрын

You have to be an E.T to make this piece of art, your patience is unreal, my respect

@worobaaer7010 Жыл бұрын

That precision, that complete master of electronics... Pure genius

@jaijethwa4243 7 ай бұрын

hats off.! Your technical stuff and the knowledge you applied to the toy truck was insane. Engineering at its finest. LOVED your work sir.

@shreksmith Жыл бұрын

Oh my god the legend has blessed us with a new upload😵

@nutwiss Жыл бұрын

Beautiful work. Your deadbug stuff is lovely. Just a thought - seeing as you've got that massive (relatively) lipo in the trailer, could you add a nice sound module? There are some lovely mobile-phone style speakers with really good fidelity which would suit this scenario really well.

@somedudewithakeyboard Жыл бұрын

Do you have a link where one could find such speakers?

@nutwiss Жыл бұрын

@@somedudewithakeyboardThe Adafruit Stemma speaker is rather good, you might need to rework the board though for size, but the driver itself is lovely.

@osmanpasha96 Жыл бұрын

@@somedudewithakeyboard maybe any of iphone speakers on aliexpress? iphone 5s speakers are particularly small

@vinyltheif Жыл бұрын

Hi nice work. I've fitted audio on some of my matchbox speedkings & superkings models, I've been using a speaker from scrapped products at a company I work for (NDT instrumentation), they're 18mm x 12mm & excellent quality (our products are very high quality), I doubt Alibaba would list any that comes close to them, I'll find out fro our purchasing department where we buy them from, & the spec for you. This was my first audio one; kzfaq.info/get/bejne/eLh5dtKl1snbZKM.html

@somedudewithakeyboard Жыл бұрын

@@nutwiss That one is way too big for 1:87 and 1:150 scale models.

@giahido Жыл бұрын

外国のチャンネルだと思ってみてたらダイソーバッテリーとタミヤの塗料が出てきて、なんかほっこりしました。

@waynecampbell9714 6 ай бұрын

Absolutely brilliant the most precise soldering I've seen in my entire life. The steady hands you need to do this, this guy has talent

@itskatakiofficial Жыл бұрын

what a masterpiece 👏

@genmanyuri Жыл бұрын

это очень круто, помню я в 1993 году пытался тоже машинку на радиоуправлении так переделать, но деталей было столько, что не влезли в корпус )) в итоге гонял без корпуса ))

@impulserr Жыл бұрын

You can't imagine how big smile was on my face about all those lights.

@jmodsbricks Жыл бұрын

this is so cool! it even sounds like a mini diesel engine running it

@hondahirny Жыл бұрын

Beautiful work 😊 Amazing to see something so small with so many features.

@foxhazhax4845 Жыл бұрын

I solder under a microscope for a living and this guy has my patience and steady-handedness beat by a looooong shot. Respect, fam

@KMHrock89 Жыл бұрын

I like how it even sounds like a diesel. Marvelous

@fog345 Жыл бұрын

This guy transform cheap plastic truck car to expensive and complex rc truck. Nice video

@SeiRruf Жыл бұрын

Your work is absolutely amazing! Attention to detail is always right on spot. Bless you and your sharing of all the schematics and programming to make this happen!!

@kjamison5951 Жыл бұрын

Magnificent! The detail is astounding and the bespoke installation of the RC components is stunning. You have some real estate in the trailer, what about a sound module? Revving engine and reversing beeps to start? Incredible work. You deserve for this to go viral!

@NexxuSix 2 ай бұрын

Incredible patience, and attention to detail! 😮

@WhiteBaerDIY 7 күн бұрын

One of the most beautiful cars I've ever seen ❤❤

@YassineKAOUANE Жыл бұрын

awesome. it sounds as if there's tiny engin in there too.

@ottotater2787 Жыл бұрын

Fabulous. I particularly like the steering mechanism because it's so functional but the whole thing is just fabulous.

@devnarayan5458 Жыл бұрын

Just wow! Amazed by how much detailed everything looks! I salute your patience brother!

@dr.harshalpadole8206 Жыл бұрын

One of the most beautiful and satisfying video ever❤

@user-er7oo4uk1o Жыл бұрын

전조등과 바향지시등의 디테일이 끝내주네요. 최고의 Mini RC CAR !!

@kAi-ub8hi Жыл бұрын

The amount of engineering and art is just wow.

@user-co2vz4py3r 4 ай бұрын

Looks fantastic-good detail...but sounds like my cat when he's happy.

@OldManTheseDays Жыл бұрын

That’s amazing. There’s no way my ape paws could possibly achieve that kind of precision and detail.

@muffdriver69 Жыл бұрын

This video is genius! The part at 6:12 really got me stooped. Dedication and patience is key to the creation of this design something that I cannot even fathom of doing myself. Well done!!!

@FahadAsad Жыл бұрын

That's amazing. Managing things to fit on micro level. It's very hard and you have done perfectly!

@hiroyukibai Жыл бұрын

信じられない…すごい技術で驚きました。

@cheeseburgerpro69 4 ай бұрын

If this was on sell I’ll 100 percent buy it

@crazyhorse1076 Жыл бұрын

😃🤌 INCRÍVEL A CRIATIVIDADE E A CAPACIDADE DE FAZER ALGO ASSIM !

@thehernandezmediacorporation Жыл бұрын

To an extent, 1/150 is very close to N scale for model railroading, and so this would be yet another awesome accessory to add to my layout.

@willfraser5105 Жыл бұрын

Imagine if this were adopted by N-Scale manufacturers and part of the T-Trak spec. That would be awesome. KATO make it happen!

@NvmThemHereIAm Жыл бұрын

Man with the blinkers and everything, that is so nice

@ashleyfrett10 Жыл бұрын

What I like most is the sound of the little engine rubbing against the gears it sounds like a real truck idling

@CarNerd7 Жыл бұрын

Absolutely insane!! Amazing detail!! Truly beautiful honestly I wish I could do that

@Veselin_Angelov Жыл бұрын

Look at all the precise work that went into the rig! Sure, the magnification makes the control circuitry appear large, but those are some tiny chips and soldering joints. I didn't expect the retrofit to go through the lengths of rigging the truck's and trailer's lights, too. So, that's a pleasant surprise. I wish the toys from my childhood were made with this much diligence and attention to detail.

@user-ek9os5np6c 3 ай бұрын

such precision and devotion surpasses magic

@Trotter13 Жыл бұрын

Occastionaly, you realize that some people are just better at life than you are ... One day I hope to be living at a level of existeance that comes close to you. In other words, YOU ARE A BADASS!

@joewoodchuck3824 Жыл бұрын

Fantastic work, and being just a bit off from N scale model trains it might still fit in without anyone noticing. The operation is very smooth too.

@Sohave Жыл бұрын

Much more sophisticated and with much better driving ability than my 1:160 scale Faller to Rc conversion. This is very impressive! I would love to replicate this buid, but I lack the electronics skills you have. I wish that these servos and circuit boards were commercially available.

@lordbetagtx Жыл бұрын

Yes

@rbaleksandar Жыл бұрын

If I were a hear surgeon with a patient on the table right in front of me I wouldn't sweat as much as I did while watching this assembly. Absolutely incredible! The whole time I was "Please don't sneeze". XD

@cl00x3r Жыл бұрын

a man who truly loves his job, awesome

@artbyrobot1 Жыл бұрын

this is mind blowing! Your micro electronics are super inspiring! You could build any robot!

@kevinleee3408 Жыл бұрын

I love the little purring sound it makes.

@noddy176 Жыл бұрын

I found building 1:10 Monstertrucks with led lichting hard evertime. This is another level. Love it!💖

@DJvvAZZ Жыл бұрын

Amazing! I own a Tamyia 1:14 truck, and for years have dreamed of building a tiny scale truck. Didn't think it was possible... Now I know it is! Thank you!

@AndroidMkII Жыл бұрын

i clicked on the timecode when i had this time

@Razorb29 Жыл бұрын

This reminds me of those “zip zaps” that radioshack here in the US they used to sell a long time ago but much more intricate. Very well done

@Kummelkopplung 6 ай бұрын

You are either a talented genius, or a talented giant.

@cpk313 4 ай бұрын

I'm blown away by connecting magnet wire to magnet wire and not having it short out, plus all the other connections. I used to rewire tonearms and I thought that took some skill, HA!