Рет қаралды 1,806
HOLMARC's Dip coating unit with infrared dryer (HO-TH-02B) has been designed to keep operator involvement as minimum as possible so that variables like speed, duration, etc. are maintained accurately by micro processor controller. Movements are achieved by a precision servo motor controlled linear stage that offers vibration and noise free operation. It helps to create a uniform coating on the substrate.
Dip coating unit with infrared dryer has both manual as well as PC mode. In manual mode a user friendly front panel with keyboard and LCD display is provided to enter all dipping and withdrawal parameters where as in PC mode entire unit can be controlled by user friendly software. It is also possible to save programs for future use.
HOLMARC's Dip coating unit with infrared dryer (HO-TH-02B) has an infrared dryer incorporated with it. This is meant for drying the substrate after the coating has been made. It has an infrared bulb inside, whose temperature can be set to a maximum of 200°C from ambient. The infrared dryer provides uniform heating to the substrate. The temperature iss swiftly attained so that the time taken for the dipping process is greatly reduced. PID Controller is used for optimum heating of the substrate. Apart from other sensors that sense the temperature of the heating chamber as a whole, the infrared sensor gives feedback of the temperature attained by the substrate by monitoring its emissivity.