No video
Dirt Bike Case Repair
Рет қаралды 25,547
Күн бұрынHere is bottom case half from a two stroke dirt bike. It is damaged and needs repair. As you can see in the video it has a crack that needs to be welded and then dressed smooth. I used my TIG welder, die grinder, and Dremel for the job. Enjoy!
@54alans 2 жыл бұрын
Great job, good to watch 🙂
@Supercarlsunday 2 жыл бұрын
Nice! I have one of these to do today, wish me luck lol.
@themellowmechanic 2 жыл бұрын
Good luck!
@dirtbiketimemachine7167 Жыл бұрын
Wow good to see someone who knows what they are doin. Wanna weld my case to 😂
@XJonAye 9 ай бұрын
Well i had someone weld my case, but there are still cracks on the gasket surface. I bought a dremmel kit, so I'm going to do exactly what you did to mine, get it notched out and pay someone to weld it
@stevieboy7873 2 жыл бұрын
Great job and looks awsome
@markcurry3624 2 жыл бұрын
Very well done!
@humourless682 10 ай бұрын
On case repairs, used mixed wave form at relatively low frequency.
@Mr10usdad Жыл бұрын
Great Job!
@fantastiqtechnalogysiklls3358 Жыл бұрын
Good job
@sicks6six Жыл бұрын
surprised you didn't finish off with a sheet of wet-n-dry on a plate of glass for a perfectly flat mating surface. . . kitchen Formica benches suffice. . .and yes, it has a thick paper gasket,
@nickstroke Жыл бұрын
I was told by a neighbor to heat it up a bunch of times (not too much or anything) because he says it will help get oil out of the metal. Is there any truth to this or should I just rely on brake cleaner? Thanks for the video, I'm excited to tackle a very similar project!
@themellowmechanic Жыл бұрын
I haven’t heard that one. Cleaning it well and removing the surface oxides and contaminants with a file has always worked for me.
@osbornebay944 2 жыл бұрын
Super, Are you a AC tig and thick tungsten?
@themellowmechanic 2 жыл бұрын
Lincoln precision tig 185 set to AC using 1/16 tungsten. I should’ve used my 3/32 tungstens!
@vincejestersmith 4 ай бұрын
I tried aluminum wire and argon in my mig and didn't have much luck. Are tumgsten sticks better? I have a stick welder as well. Thank you.
@200xcBruce 11 ай бұрын
If that wire wheel was used on steel, you made this job a lot more difficult.
@snakepliskin5415 2 жыл бұрын
CAN I SEND YOU A 2002 KX250 CASE THAT NEEDS A SMALL REPAIR CAN SEND PICS
@snakepliskin5415 2 жыл бұрын
IM NEAR ATL GA WHERE ARE YOU LOCATED
@themellowmechanic 2 жыл бұрын
Email me: themellowmechanic@gmail
@snakepliskin5415 2 жыл бұрын
@@themellowmechanic IM GONNA SEND YOU PICS IN A LITTLE WHILE
@snakepliskin5415 2 жыл бұрын
HELLO I SENT YOU THE PICS ,PROP UNDER A DIFFERENT EMAIL
Friendeez
Рет қаралды 15 МЛН
The Fabrication Series
Рет қаралды 675 М.
Friendeez
Рет қаралды 15 МЛН