DIRT CHEAP Turbo 6 Cylinder Build! We Cut The 0-60 Time IN HALF!

Рет қаралды 523,704

Күн бұрын

What happens when you take a $800 old trash truck and slap on a $123 Amazon turbo? EVERYTHING GOOD! In this epsiode, Tony Angelo and the Stay Tuned crew slap a dirt cheap turbo setup on Barb's 1980 Dodge D150 in hopes of significantly increasing its incredibly lackluster performance. Will it sound nasty and perform flawlessly, or will it get sent to space in 1000 pieces? STAY TUNED to find out!
----------------------------------------------------------------
CHAPTERS:
0:00 - Intro
3:24 - First 0-60 Runs
5:28 - DIRT CHEAP Turbo Kit Build!
45:53 - First Fire Up!
50:20 - First Drive
52:20 - Clutch Woes
55:32 - Back in the Streets
57:25 - TURBO 0-60 RUNS!
----------------------------------------------------------------
BUY US A PIZZA HERE!: www.paypal.com/donate/?hosted...
Join this channel to get access to perks:
/ @staytunedta
WE APPRECIATE YA!
Send Me Stuff!! - PO Box 68, Spring City PA, 19475
Instagram: / tangelo96
----------------------------------------------------------------
STAY TUNED CREW:
Barb: / mbarbalinardo
Russo: / thakingofhearts
Mike Kunz: / mikeslim
Stone: / stoneharleysheetz
Tunes by the Subtastics!
----------------------------------------------------------------
MY PARTNERS:
Holley: tag.gs/Tony_Angelo_YT
Summit Racing: www.summitracing.com/
Wirecare: www.wirecare.com/
Miller Welders: Click the link to Grab Our Synchrowave 210! www.millerwelds.com/equipment...
FREE SHIPPING on all orders when code "staytunedta96" is used on either PypesExhaust.com
or ColdCaseRadiators.com!

Пікірлер: 2 200

@SouleBrothersGarage 23 күн бұрын

My Wife can’t always remember the name of this show so she keeps calling it “Dad Bods & Hot Rods” and won’t let me watch it without her.

@BP-el9zr 17 күн бұрын

Watch it in the restroom on company time like the rest of us.

@oiudsaf 17 күн бұрын

😂😂😂😂@@BP-el9zr

@williamstamper442 11 күн бұрын

If she is really into dad bods then you are set for life. You will have nothing to worry about when you get about 50 and everything starts to droop down a little and move a little slower.

@Robtuse_ 25 күн бұрын

This is one of the most underrated KZfaq channels out there

@ifgezroxy 25 күн бұрын

Easily. With their content and the entertainment value they deserve at least triple the amount of subscribers. 👌

@PhyteByte 23 күн бұрын

@@ifgezroxy yall stay saying that... blehhhh

@netrioter 21 күн бұрын

Lets hope Motor Trend dont try to destroy it

@Tuchodi8004 23 күн бұрын

Nice. You’ve now doubled the value of every slant 6 on the planet though 😂

@GrEmLiN76X 17 күн бұрын

Three grown men giggling in the front seat at the boost noises was just priceless. Felt like I was there. Well done guys!

@petes5152 25 күн бұрын

This is the kind of insanity I come to this channel for. Well done.

@anthonyferretti28 23 күн бұрын

"Barb realized that a turbo is, in fact, a muffler" 1995 Honda Civic owners world wide just said "Amen" out loud.

@kennethduffield8684 10 күн бұрын

I had an 82 D100 with a slant 6 in 94. I bought some performance parts from the dealer to get it to (their estimated) 300hp. I had a choice of 4bbl or a 6 pack intake, performance cam, high compression pistons to take it from 7:1 to 11:1 compression, and dual header manifold Im not sure the true horsepower, but that thing was a beast after I got it dialed in. I was getting 18-20 mpg in town, 24-26 on highway. Sadly, snow and a drunk driver took it out in 98

@markwhatzhisface3331 2 күн бұрын

Losing the Cat and adding a 4 barrel adds 100hp easy. Their turbo is just pushing the same amount of air through a small hole as a 4 barrel intake.

@HackeryX 23 күн бұрын

So glad you didn't just disappear from the interwebs all together you were my favorite motortrend host

@melvingibson4525 21 күн бұрын

He didn't just "not disappear", he came back better than ever!

@HackeryX 21 күн бұрын

@@melvingibson4525 right on

@RyanFannon-fy1yf 25 күн бұрын

😂😂 “couple seconds of fury….story of my life” -Tony Angelo

@lifetimevybes 25 күн бұрын

MaxPP tho..

@RoofinDanRHODEISLAND 25 күн бұрын

Ha ha , absolutely funny, 👌🏻

@waynesmith-r8c 25 күн бұрын

just came here to highlight this,should be a shirt

@kilisomeleuga2969 24 күн бұрын

I think Tony & I are living the same life! 🤣🤣🤣

@SloppyMechanics 24 күн бұрын

its me, im him

@leonardhirtle3645 25 күн бұрын

That dirty sanchez stache makes you look straight out of the 70’s.

@StayTunedTA 25 күн бұрын

I appreciate that.

@hickup8661 25 күн бұрын

😂

@proinseasokiellig4388 25 күн бұрын

@@StayTunedTA Badges?? WE DON'T NEED NO STINKIN BADGES!!

@4eyefoxbodyfanclub625 24 күн бұрын

Tony looks like the biker from the village people!😂😂😂

@dastardlyman 23 күн бұрын

yes

@davidcates9000 24 күн бұрын

The recurring MaxxPP “Big D100” jokes kept me rolling 😂

@justinwise6950 23 күн бұрын

Same! Like when Homer changed his name to Max Power.

@kellyj1464 24 күн бұрын

There are a lot of cheap turbo build videos but I think you guys are the champions of cost/benefit with this build. Most folks don't have access to free ECU/dyno tuning so the reduction in cost and accessibility of this build is not purely the sum of the parts. Worth noting that ECU turbo kits always have the throttle body after the turbo, this is the real reason BOVs exist. Since a carb shuts off gas to the inlet of the turbo and there is nothing blocking the flow into the engine, it's impossible to create a condition where the pressure after the compressor's outlet suddenly spikes. The engine will eat up everything between the compressor outlet and the intake valves. Another advantage of creating a vacuum on the inlet of the compressor it that it substantially reduces the drag on the turbine, so essentially it's like anti-lag keeping the wheel spinning faster in between shifts.

@justinbarrera4377 Күн бұрын

no, you can still get air pushing back out the compressor. You can hear it on higher output diesels

@kellyj1464 7 сағат бұрын

@@justinbarrera4377 You obviously don't know what you're talking about.

@vdubboy85225 25 күн бұрын

Take a shot the number of times Tony says "I'll weld that up", and the next shot is Barb welding 😅

@StayTunedTA 25 күн бұрын

Haha, it’s his truck! I did knock out that sweet down pipe and gave myself a sweet suntan.

@raylighter9769 25 күн бұрын

The amount of max PP jokes and they hit every time 😂

@bgee461 24 күн бұрын

That's a good leader though... his channel, his livelihood. You need to know what and when to delegate. If you did everything yourself, eventually time runs out and projects don't get done. Kudos to Tony for knowing how not to lose the shop.

@dogsrlcatsdl4524 21 күн бұрын

....or the number of times he said, " we're ALMOST there." ...🍕🍕🍕

@vdubboy85225 20 күн бұрын

@@dogsrlcatsdl4524 🤣

@Jakemniss 25 күн бұрын

"I can't believe that Honda Odyssey was on our test track." lol

@nickmoses677 24 күн бұрын

The “Barb’s excitement was short lived” scene is priceless LOL those moments in the shop are what make the memories 🤘🏻

@kh40yr 23 күн бұрын

In the 21 seconds it took to 60mph, the Parker Solar Probe(fastest man made object) traveled 2,520 miles. The probe travels at 120 miles PER SECOND, 60 miles every half second. All I'm saying is that Stay Tuned could up that antie. CALL NASA, tell them "$125 turbo", and hang up.

@ixiwixi 25 күн бұрын

Stay Tuned is the perfect beginning to my weekend

@StayTunedTA 25 күн бұрын

Right on thanks for watching!

@Dougprince72 25 күн бұрын

Second that

@user-dy3cu7md8w 25 күн бұрын

blow me

@CircleTrackC10 25 күн бұрын

nothing like driving a slow car fast. most fun in the world.

@guyforlogos 24 күн бұрын

And a lot less illegal😂

@InMateTheRebel 24 күн бұрын

"The bigger the turd, the more the fun"

@brucesomers7555 24 күн бұрын

Thrashing hooptys is a blast.

@deathwish8339 23 күн бұрын

Have you tried, now hear me out, driving a fast car fast? I'm telling you, it's way more fun.

@CivilizedWarrior 20 күн бұрын

⁠@@deathwish8339 I can’t say that I have. I have been trying to not be poor, but that hasn’t worked out for me yet either lol. 🤞

@NeuKrofta 23 күн бұрын

The slant six is criminally overlooked

@Mullratte 8 күн бұрын

Not really it’s painfully slow there are literally hundreds of better options available

@NeuKrofta 6 күн бұрын

@Mullratte it's also stupid reliable and a great engine

@Mullratte 6 күн бұрын

@@NeuKrofta I’m not saying it’s a bad engine but there is a reason why people don’t talk about it.

@terrypfaff840 6 күн бұрын

The turbo needs to have a compressor seal for a draw through system it may not have one also to keep the carb from icing you may have to add water heat to the inlet manifold. If it smokes on decell its the compressor seal. Used to have a turbo company in the late 70s/80s did lots of systems. Draw through is great since it puts the compressor in a vacuum when the throttle is closed and doesn’t slow the trubo down between shifts as much. You can acctually createe lots of boost in neutral just by pumping the throttle before a hard launch

@jamiejenkins5643 23 күн бұрын

Remind me of when you used to wake up on Sunday and watch TNN the power hour with Stacey David.. and then the 4 by 4 show. Work all week we need this

@ni_wink84 25 күн бұрын

When you’re sitting out on the patio of the trailer house, watching the bug light do its job, it’s sure nice to see a stay tuned video on your feed! 😂😂

@qmopar 25 күн бұрын

The pure elation when you cut the new 0-60 time is why I'm here. You guys rule! Let's GO!!!

@rickfazzini22 21 күн бұрын

I like when Tony cracks a wiseass joke and off in the distance you can hear Barb laughing😂 you guys bring the good times, thanks for the entertainment it’s much appreciated

@breisch1986 23 күн бұрын

Draw through turbo setup? Hell yes! Nobody ever talks about these.

@sstevocamaro 23 күн бұрын

Seems kinda dangerous lol

@xmo552 22 күн бұрын

1981 turbo trans am Martin turbo systems Accel Turbosonic Ak Miller tons of air cooled VWs use this

@breisch1986 22 күн бұрын

@@sstevocamaro how? That's how traditional supercharger systems work. And superchargers generate high intake temperatures as well.

@hotrodswoodshed7405 21 күн бұрын

Agree. I've been NEEDING this

@ElektronDeForza 21 күн бұрын

@@breisch1986I wouldn't say dangerous, but turbos on carbs are dumb, in fact all carbs are dumb

@davroscaan1318 25 күн бұрын

Hard to beat a turbo built by a 15 year old with 10 years of experience.

@lethargicmotorsport2025 25 күн бұрын

My wife is wondering why I’m laughing so hard .

@theadmiralchallenger6265 25 күн бұрын

13 years experience, master turbo builder by now

@MrXdaltonxp 25 күн бұрын

😂

@MrXdaltonxp 25 күн бұрын

Speaking as the father of two, never underestimate the power of child labor!!!

@gregoryneal2852 23 күн бұрын

Probably a supervisor by 10.

@sarahdell4042 25 күн бұрын

This setup is way cooler than a V8 swap!

@PaletoB 25 күн бұрын

The world needs more turbo 6s 😁

@xmo552 22 күн бұрын

wait until you need to tow uphill

@sarahdell4042 22 күн бұрын

@@xmo552 I’ve owned a 318 D150 before. Towing with one of those up steep elevation stinks too ha

@xmo552 22 күн бұрын

@@sarahdell4042 I'd suggest 360"+

@Obsidian-One 25 күн бұрын

That's one thing I like about your show is it's realistic! Everything does not always go well or correctly in real life and that's nice to see. Keep it up!

@button-puncher 23 күн бұрын

BOV isn't needed in a draw through setup. BOV is meant to stop pressure building against a closed throttle. Your throttle is before the turbo so when it closes, there's no air to compress. It creates a vacuum in that elbow before the turbo when the throttle snaps shut. Doesn't hurt anything. OR Vent the BOV out the hood, add spark plug.

@600wheel 21 күн бұрын

Dammit I just finished typing the same thing. Smart people do watch this channel 😂

@petersdraggon 20 күн бұрын

Funny, flamethrower 😂

@Mmizen2296 25 күн бұрын

3 bong rips in and they hit me with “M8PP” bahahaha

@JoshuaClark19 20 күн бұрын

what does that mean?!

@papascustomcars 25 күн бұрын

I love the "it's going to be less slow" comment... cracks me up!

@darrenrhodes8448 18 күн бұрын

Grew up on 225 s That was the coolest video ever I laughed my butt off Good job guys

@paul44235 25 күн бұрын

I'd buy those D100's all day long for $800! That's at least a $2500 truck in my area. I love the looks of the late 70 early 80 Dodge trucks.

@joek2015 25 күн бұрын

I can't even find good doors for my w300 for $800

@ryubiggie 25 күн бұрын

I'd buy one that runs and the cab doesn't leak. I my parents had a 83 with the leaning tower of Power when I was growing up. I wish I would have gotten it as my first car.

@timothykeith1367 23 күн бұрын

The metal grilles look good

@danielwebster8019 23 күн бұрын

I have a 67 camper special 318 that I'm trying to get on the road I've had 3 people try to buy it in the last couple of months.

@bigospig 25 күн бұрын

Holy Cow! I haven't been so happy to see a car goal hit since Stubby Bob pulled a monster wheelie! ST is the BEST!!!!! 🏁🏁🏁🏁

@TheKeymaster316 24 күн бұрын

Man, that payoff at the end made the whole video. Barb couldn't hide that smile if he tried! Would love to see ya'll do a turbo on a low compression 460 from the mid to late 70's. Another stellar video from Stay Tuned. I usually wait till Sunday to watch your videos as an ode to the 90's Power Block days, but after seeing a peek at what ya'll were doing, I couldn't help myself and watched it early.

@matthewkraemer3265 20 күн бұрын

My Dad bought a new 1985 Dodge Van with the Slant 6 and 4 speed manual transmission. It was a pig stock, although the manual helped get the most out of it. He dropped his acceleration time significantly by upgrading to an Offy Intake manifold with a 500cfm 4-bbl carb, and going with straight pipe 2.5” exhaust with a Borla muffler. If I recall, we got it down about the same amount as yours. He put over 300,000 miles on that van, and only got rid of it after it was demolished in a bad accident when it got t-boned. It still ran great!

@careycummings9999 25 күн бұрын

Tony was just itchin' to cut a hole in Barb's hood! That truck is a beast now. R.I.P. clutch.

@alexray2925 2 күн бұрын

Wow wow wow guy easy now. Can't say that stuff. this is a family channel. .... Just playing. These guys rock funny as hell... .. ..

@bigospig 25 күн бұрын

I love it when Stone took over the camera and we were looking down at Tony's head.😆

@stoneharley4184 25 күн бұрын

Just checking for bald spots. 😂

@kilisomeleuga2969 24 күн бұрын

Making stuff go fast on the cheap takes me back to my younger, broke days(that's why we wrenched on our own stuff, cause we couldn't afford to pay a shop to do it!). Thanks for reminding me of a simpler, more fun time hanging & wrenching with my boys(with beer of course)!!

@chrisw5837 23 күн бұрын

Awesome. This is hot rodding. Fabbing up stuff on the cheap and making things go faster!

@FlyingShotsman 25 күн бұрын

Anybody else quietly hoping that when the blowoff valve opens and vents a high-pressure stoichiometric air/fuel mix over the exhaust manifold, that much hilarity will ensue? EDIT: Aw, shit, Tony figured it out!

@wilsondriver654 25 күн бұрын

Came here for that haha

@greenbassboosts8872 25 күн бұрын

They should route it into the exhaust collector(s)

@mattangrave8478 25 күн бұрын

I'm 15mins in hoping they worked it out lol

@stretch44875 24 күн бұрын

I'd rite a pipe from it through the fender with a spark plug, be shooting flames!

@SeishukuS12 24 күн бұрын

I was thinking that the moment he said blow-off valve and draw-through. lol

@Stinkie_Cheese_Man 25 күн бұрын

TONY IS THE MAN!!!!

@StayTunedTA 25 күн бұрын

Well, thanks! I do my best.

@MegaRetr 23 күн бұрын

Awesome) This is the kind of insanity I come to this channel for))

@k5ren 25 күн бұрын

TONY! This is the most entertainment I've had in a while! I drive a '70 Belvedere wagon w/ the 225 & 3 right there on the tree. I saw a video of a guy that did a suck-thru set up but it only showed the end result, it's SO good to see the build as well. The Suck-thru is such a "different" way to go. Just lay the carb on the fender! LoL Lots of fab work but this IS doable! Absolutely excellent build Tony and Barb! Thanks kids!!

@ManiacRacing 25 күн бұрын

I love leaning towers of power! I had a 62 Dodge truck with the big iron slant6 and that sucker was literally unkillable. I ended up selling the truck around 1998 because I could no longer buy brake shoes, but that engine still ran!

@StayTunedTA 25 күн бұрын

Yes! theyrun and run and run and run and

@ManiacRacing 25 күн бұрын

@@StayTunedTA And I won't even tell you the abuse I subjected that poor thing to....nobody would believe me!

@brucesomers7555 24 күн бұрын

My first car from Dad was a '64 'Cuda with a slant six,Dad said 'What are you going to do with this junker?' Me; 'Looking for a big-block' 'That's my boy!!!'

@timothykeith1367 23 күн бұрын

Brake shoes are available

@ManiacRacing 23 күн бұрын

@@timothykeith1367 They were not back then. Only source I found was a place in Montana that would reline my existing brakes, but they had like a 4 month turnaround and I needed to get to work. And it was before the internet

@-Mike-69 25 күн бұрын

I don't remember the slant 6 in my 64 Dodge A100 behaving like that. That's incredible guys. Cutting that 60 time in half ! This is great. No big dollar sponsors. No massive shop full of equipment that never gets used. Just guys playing with cars. Hot rods. Real cars that get driven.

@steveelco114 24 күн бұрын

Barbs attention to detail, I can appreciate his ocd ✊️

@nowelrangel14 23 күн бұрын

Its all in the attitude, i can watch these guys build cars all day! Good content friends, you're doing fun things, love it, its inspiring!

@j2kinflarc768 25 күн бұрын

I’m sure like most people I’m hear for Tony, but stay because of the team,the builds, and just the great vibe. It’s great to see people putting big money into a build, but I also love to see short money just randomly thrown at a project just for fun.

@fawien 25 күн бұрын

Back in the 90s in high-school me and my brother built this sweet 1980 sky blue dodge aspen with a 225 up into a lil street car. Alluminum intake, headers, comp cam, holley 600, dual exhaust. It wasn't crazy, but it would outrun some of the mustangs on the highway. Coming back from the dragstrip one night, being the dumb teenager he was, my brother was running 100+ on the highway in 85mph tires. Blew 3 tires out and dumped the car into a ditch. We bought a 1975 Plymouth duster to continue on with another 225 (250k miles on it) drove it around for a few months, then swapped the aspen built motor into it. When we tore down the Plymouth 225 that ran perfectly fine, it had 4 bent pushrods and didn't care a wink about it. Love those little sewing machines.

@jeffryblackmon4846 13 күн бұрын

You remind me of my friend Mike and I when we were wrenching on cars in the mid 1960s. I appreciate your hard work, humor and the lack of bad language. Brave, cheers, and I'm now a subscriber.

@GenXFilez 19 күн бұрын

I had one of these in high school back in 94. I spent a summer working at a junkyard and was paid in parts. I pulled the 225 and the 3 spd with granny gear. Put in a 318 and a auto also added A/C and cruise. Great video guys. Thanks for the memories.

@hejmuesli 25 күн бұрын

This episode was an instant favorite. Please return to this project and make some reasonable adjustments and improvements :)

@frestkd 25 күн бұрын

International Harvester did a turbocharged 154ci inline 4 (1/2 V8) in their first generation Scouts. It was the same design, but with a single barrel carburetor. Time for a new clutch, and a powertrax no slip.

@buzzwaldron6195 24 күн бұрын

'62 Olds Jetfire was draw through 1 barrel carb. turbo small aluminum V8... he didn't need that $500 oversized 2 bbl. carb... kzfaq.info/get/bejne/gOCnaLpi17ixn5s.html

@festerhairball6588 22 күн бұрын

Love the straight 6's! lots of room to work on, simple, cheap & you can make em move !!! Subscribed !!!

@tonypozzini4724 25 күн бұрын

ordered a "Pizza team with a Racing problem" shirt! Love the build! Keep up the great work!

@mlivshiz 25 күн бұрын

The enthusiasm over a 9s 0-60 time at the end is why I look forward to every Friday. Love this channel.

@titaniummechanism3214 24 күн бұрын

You'd be hard pressed to find anything that'll give you that amount of performance gain for this little money! What a wonderful truck, looks clean, sounds great! A burbling V8 is awesome, but there is something to be said for some good turbo noises!

@Riggs1982 24 күн бұрын

I watch a lot car vidoes on youtube super happy i found you guys. love the video

@SgtPickledic 25 күн бұрын

Dude looking like Ron Jeremy with that stash 😂😂😂😂😂⚰

@eminence55 25 күн бұрын

...from the waist up !

@4eyefoxbodyfanclub625 24 күн бұрын

@@eminence55 🤣

@GrandPitoVic 25 күн бұрын

THE MOST UNCONVENTIONAL BUILDS MAKE YOUR CHANNEL PERFECT!!!! HATS OFF BROTHERS!!!!!

@ImJustaWhiteGuy09 15 күн бұрын

Awesome job guys! I grew up in a Mopar family and always gave my Gramps a lot of crap for his slow ass D100 shop truck. I made him watch this video and now he wants to replicate your project! Thank you so much for doing what you do. I've never met you guys but feel like you're my buddies every time I watch. Now my 75 yr old Gramps is a fan just from this video. Much love and respect!

@johnwayne3904 25 күн бұрын

Tony, man, and Barb... I've laughed my ass off during this episode 😂 I really appreciate y'all and what you give to us peasants on upload day! Y'all rock!

@dooby1445 12 күн бұрын

These are my absolute favorite episodes. Throwing cheap turbos on cars that no one would think to put them on. Cheap power is the best power!!!

@MrMoparWagon 25 күн бұрын

Honestly, that truck set up like that is one of my dream vehicles. I love it.

@d.dranner5150 25 күн бұрын

I feel you.....one day brother 1 day.

@226SW40 22 күн бұрын

Y'all are insane. Thank you ;) It sounds incredible.

@aarongrattafiori617 22 күн бұрын

Barb is doing awesome in front of the camera, seems way more comfortable

@Thatdude877 25 күн бұрын

I don't know how I haven't found your channel before now, but you boys definitely deserve more eyes! This was fcking great!

@StayTunedTA 25 күн бұрын

Welcome aboard! Thanks!

@tomrowland6141 25 күн бұрын

My wife's best friend has one. I borrow it all of the time to get supplies for her honey-do list. Like you said, nothing outstanding at all, but she runs.

@StayTunedTA 25 күн бұрын

They don't quit!

@brucesomers7555 24 күн бұрын

My best friend got one with a 318 for $1,200, about the same year, dang thing will probably outlive all of us.

@glennhudgens4709 16 күн бұрын

u guys are absolutely hilarious, i really enjoy watching da vehicles dat yall "upgrade" just for da fun of it! keep it up and i will keep watching!

@judyryberg9336 18 күн бұрын

Watching your video seeing many of the roads that I have driven on for many years... Did not know you were so close to our area... Remember seeing the Prolong commercial many times HA! HA! Took my buddy's AAR Cuda ([340 six-pack] if we only knew what that car would be worth now) down the same road that you ran the 0-60 on and the Cuda blew my mind. Crazy !!! Keep up the GREAT videos!

@StayTunedTA 18 күн бұрын

Thanks! Appreciate it!

@sam49921 25 күн бұрын

Draw thru is so old school everybody forgets you need a carbon seal on the compressor side of the turbo The throttle blades closing pulls oil past the piston ring style seal on the turbine shaft

@button-puncher 23 күн бұрын

Yeah, really high vacuum being created.

@sam49921 23 күн бұрын

@@button-puncher especially being a manual transmission truck

@button-puncher 23 күн бұрын

@@sam49921 Good point! If it was an auto, at least he could keep it floored.

@timmyanderson1576 22 күн бұрын

got to my point last bit video. draw through be venting fuel mix straight out blow off making a perfect fire situation...unless you vent the waste to exhaust for a bit of RB26 flame action

@JohnnyDok 22 күн бұрын

Just thank you, an absolute classic

@patricklopez1799 25 күн бұрын

Lit up the friday night J and tuned into Stay Tuned.

@StayTunedTA 25 күн бұрын

Let's GOOOO

@billyt9987 25 күн бұрын

Funny you should say that. As I'm blazing away watching "Stay Tuned".

@joshuagibson2520 25 күн бұрын

Yuuuuup. S\T and a few puffs. Life is good.

@patricktheexpat 25 күн бұрын

The perfect pairing.

@HillbillySailor 21 күн бұрын

This truck has "Power Tour" written all over it!!!

@user-ko1jg7ny8t 18 күн бұрын

Damn Glad to see you again. Love the show Period!

@roywhitman7109 25 күн бұрын

DOOOOOODS!!! This has to be one of my favorite episodes!! Love that truck❣️😂😂👍

@burgpath7777 25 күн бұрын

I loved this video, not just for the build but Tony's commentary and facial expressions. Haven't laughed that much at one of you kids ever! Thanks for a great video!

@lifetimevybes 25 күн бұрын

I think Barb was still running around naked off cam...

@lNowOrNeverr 22 күн бұрын

Wow this gives me motavation to work on my dad’s old Carby inline 6!! Thanks boys loved it!

@stevencolby49 21 күн бұрын

My dad had a 75 ramcharger with the same ram decals on the front fenders. This is the first truck I've ever seen with those decals.

@jonmac155 25 күн бұрын

The Barb Sled

@StayTunedTA 25 күн бұрын

Mate PP to you, good sir!

@jonmac155 25 күн бұрын

Jamaican Barbsled

@cmon470 25 күн бұрын

This is actually so sick, drawtrough turbos are the bomb

@scottd8097 24 күн бұрын

That's awesome. I love the cheap stuff.... keep it up. I'll watch everyone of these videos.

@Dougprince72 25 күн бұрын

Tony looking like the crazy dad in the Neighborhood.

@hoofington7866 25 күн бұрын

I still can't believe Barb scored that truck so cheap!!! And now it's boosted👏🙌

@StayTunedTA 25 күн бұрын

It was only listed for a couple hrs and I grabbed it quick.

@silentshredr 20 күн бұрын

One of the best single episode builds I have watched recently! Good stuff

@JeepnJeff 21 күн бұрын

That setup is sweet! I'd keep it, it's too funny. Love seeing everyone laughing. Those are the best projects.

@hendo337 25 күн бұрын

"Bracket Barb" "...I am bracketing it" 😂😂

@tchapps88 25 күн бұрын

You guys should do a 301 turbo trans am challenge where you cant change the long block but can do anything else in the quest to go faster

@WillThies70 25 күн бұрын

itll puke the rods out of it at 350 crank

@captainchicken8983 25 күн бұрын

@@WillThies70 put that crank in a 400 block and deck it, could be a poor man's ram air 5, assuming there are h beams and arp hardware at least lol

@tchapps88 25 күн бұрын

@@WillThies70 that would be entertaining to watch now wouldnt it

@justinwise6950 23 күн бұрын

They could get the one from the most recent Roadkill!

@richardholdener1727 20 күн бұрын

Awesome stuff

@justinwise6950 23 күн бұрын

What a fantastic episode! This truck is badass and you guys are hilarious! You were definitely putting that band saw to work.

@ArthurGraham88 25 күн бұрын

This is great..I can’t believe how good it sounds 😂

@jimbote1968 25 күн бұрын

Dudes! I feel like I'm right there with you! Love this stuff 110% !!

@StayTunedTA 25 күн бұрын

Glad you enjoy it!

@westonwells4357 17 күн бұрын

This is the epitome of " bad ideas executed poorly" and I love it

@LS_Rooster 22 күн бұрын

I love that this is a build anyone can do and have fun with! I bet that old trucks a blast.

@brandongreene3213 25 күн бұрын

Cleetus who? Who needs florida man when we got our PA peeps!

@BUILTFORDTOUGH79 25 күн бұрын

I’m on board man!

@StayTunedTA 25 күн бұрын

Well, that's high praise! Thanks! Cleet is rad, but i appreciate it!

@eriklarson9137 25 күн бұрын

I am down for both. No reason to diss either. Cleet and Tony are amazing, but the Rodfather is life.

@skeeterwyattMD 25 күн бұрын

As a certified Florida man I can say we get down with TA too

@VeeDees 25 күн бұрын

por qué no los dos?

@MiaJiyar_XOXO 25 күн бұрын

Thank you for not putting an LS in that thing. 👍.

@StayTunedTA 25 күн бұрын

You bet.

@glenryan6569 25 күн бұрын

Should have just put a junkyard LS in it

@numlockkilla 25 күн бұрын

Theres a time and a place and neither are true in PA!@glenryan6569

@joshuagibson2520 25 күн бұрын

Yet. Lol

@bgee461 24 күн бұрын

I wouldn't mind a new age Hemi in there, a nice little 5.7

@HoosierHacker 24 күн бұрын

Another fun project! Love the way your twisted mind works Tony!

@Pilot_the_Dune 16 күн бұрын

New to the channel. This was such a fun video with the pay off in the end!!! Instant sub!!🎉

@layzboy2545 25 күн бұрын

HellYeah Boys!! Little late but don’t wanna miss this party. Congrats Barb it’s a beast!! Beer and a Slice Time! Ready to Stay Tuned 🤘🔥🔥🔥

@Kunt5113 25 күн бұрын

We had slant sixes here in Australia. Believe it or not when they first showed up the were fast compared to other cars. They put triple Webbers on them and raced them.

@alexanderlancaster4799 19 күн бұрын

Y'all have some of the best slant six after market parts to this day. Only four barrel intake I can find for one is an offenhauser

@Kunt5113 19 күн бұрын

@alexanderlancaster4799 Yep working six cylinders is pretty common here. Chrysler replaced the slant six with the hemi six. 215, 245 and 265. One version of the 265 was 300 hp stick from factory.

@jumpsuite 18 күн бұрын

This has been a joy for me to watch thank you guys you guys know what the hell you're doing you got half the 0.60 time down the half broke a few things along the way but if anybody's got a slant 6 Dodge truck in there watching this I didn't think this would be that easy and I don't know anybody that would do this to a slant six thank you for keeping the Mopar Spirit alive using the hillside hemi or as they say to leaning Tower of power do anybody watching this is a damn good tutorial