Dirt Bike Washing Done Right!

No video

Dirt Bike Washing Done Right!

Рет қаралды 102,929

Күн бұрын

Of course everyone washes their Dirt Bike (well, maybe most everyone) some more and some less 😂. Taking care of your bike is very important and we give you some tips on how to wash/prep and maintain your Dirt Bike.
If you shop online at Rocky Mountain ATV/MC please click this affiliate link to shop in the future. There is no extra cost & it helps support our channel. Remember to click this link RM ATV/MC -DBTV Shopping each time you need to go there to shop. www.rockymount...
ON X Off Road Maps Discount code: dbtv1
subscribe.onxm...
Jay Clark/Dirt Bike TV has been around the Dirt Bike industry for thirty years and is always looking to learn and help others do so as well. Give a follow or drop an email if you have any questions or comments. Thanks for watching!
Instagram: @dirtbiketv1
Facebook: / dirt.bike.tv
KZfaq: / dirtbiketv
Website: jayclarkent.com
Email: Jay@jayclarkent.com
Thanks for watching, don’t forget to share and subscribe.
#DirtBike #Motocross #DIY

Пікірлер: 124

@-PlayMaker- 3 жыл бұрын

This is the most in depth cleaning and maintenance routine on KZfaq. Your literally the all-knowing of dirt bikes lol

@dirtbiketv1 3 жыл бұрын

Thanks!

@paulvanhout9695 3 жыл бұрын

Nice bike cleaning method. I generally remove the seat and replace the air filter with a cover before washing. Your garage is proof that the right number of bikes is one more👍

@734enduro 3 жыл бұрын

I use my leaf blower to dry off the bike. It works good for me. As always thanks for the video!

@thanedavis1273 3 жыл бұрын

I use a cordless leaf blower to blow the water off after riding.

@thanedavis1273 3 жыл бұрын

after washing.

@deleaton4523 26 күн бұрын

Jay, I followed your advice. Set my stopwatch, got out the pressure washer (mine wasn't as ready as yours), washed the bike, wiped it down, replaced the skid plate, put the pressure washer away, and it took 30 min. Thank you. Del

@dylancrow7919 11 ай бұрын

Taping the intake is such an underrated tip. Every time I went for a ride, I would come home and wash the bike. I would avoid spraying directly into the intake but probably got more water in there than I thought. I would have so much trouble getting the bike started and be worried I was losing compression or getting my carb dirty. This last time I taped up the intake before I washed it, and it fired right up so easily. I’m going to cut myself some foam plugs to fill the holes during washing.

@painsrides3616 3 жыл бұрын

Oh crap!!!!!! what simple but awesome idea...."scrubbing bubbles" .... no more buying expensive cleaners for me ..thx Jay

@TheRossillini 2 жыл бұрын

People give me shit all the time for being overkill with stuff like this but I’m glad there’s others that show love and appreciation to there bikes by doin it right.

@jacksonclark1684 4 ай бұрын

You completely changed how in depth I go to keep my bike maintained. This was really helpful thanks man

@BrandonLund 11 ай бұрын

I like your methotical way of doing things and the scrubbing bubbles is a nice tip. I'm always interested in seeing how others do things. I too like to keep my stuff pristine and ready to go at a moments notice. Thanks again!

@sanjosejeff Жыл бұрын

I use Sc1. “New dirt bike in a can”. Always pull my seat too. About every 5 months, I put die electric grease in every connector and do a loose bolt check every month but that’s really depending type and how often you ride

@bradleymuha4861 7 ай бұрын

Do you put dielectric grease in the connector or just around it?

@sanjosejeff 7 ай бұрын

@@bradleymuha4861 inside the connector. Pro tip: do it to all Ur tv remotes controls too to keep aaa and AA battery corrosion from ruining them

@fortgreeneprojects1 3 жыл бұрын

I enjoyed the video and the best way to wash your bike and with proper equipment. I never owned a dirt bike before. I want to get one for myself and my son. Peace and Love NYC...

@BraaapoholicBob 3 жыл бұрын

Jay, same here accept I do remove the air filter, shove a rag into the inlet just in case, and put a waterproof cover on it...that way I can get a clean airbox. I don't do that every time...use tape sometimes if not too dirty. Only other thing I worry about and so don't use is the pressure washer. In the past I've forced water into bearings...just chicken to use one any more. Scrubbing bubbles...LOL...I have to try that...I have always used a diluted solution of Simple Green.

@TrickRacing Жыл бұрын

Did you do this on your yz 250f? Should i block off intake

@rcarle 3 жыл бұрын

You are the one that taught me how to properly wash a bike back in the day.

@rockbay79 2 жыл бұрын

Very tight organization! Respect!

@robertwoods2505 2 жыл бұрын

Dang Jay, I didn't have any great expectations for this video but you two killed it. Great job, both of you! PS, your garage is awesome!!

@thatfast3002 2 жыл бұрын

"That's lame, your bike should always be ready" lol

@emfl4437 Жыл бұрын

The tape idea is awesome, thanks for sharing that tip.

@BlueDawnEnduro 3 жыл бұрын

I can't believe I watched the whole thing. Good job.

@justsendit3217 2 жыл бұрын

All manuals I've seen say don't use pressure washers as they push dirt into seals

@Turbo_JAM 2 жыл бұрын

Good idea on the blue tape, harder to lose the “to do” list!

@myricastillo5097 3 жыл бұрын

I really love these videos jay 🤙 I do every single tip you do and say and they save me time and money 🙂 even saves me from getting hurt when I ride 👍

@panoskeits8365 3 жыл бұрын

So, in short ,get one Spencer for your self.

@dirtbiketv1 3 жыл бұрын

haha-- He is a good help

@909ARSENAL 2 жыл бұрын

I figured it out pretty close. Thank you again STAY READY!

@marcusm.3486 3 жыл бұрын

I use ZEP Fast 505 degreaser and a magic eraser and it works really really well.

@nastysoda9212 Жыл бұрын

Thanks! I was never sure of the proper way or what to watch out for. That Yamaha looks so nice!

@hobiesmith9370 3 ай бұрын

great video!!! thank you

@spencerclark2269 3 жыл бұрын

Thanks for the great techniques and tips. I appreciate them.

@rztrzt 3 жыл бұрын

TIP: After washing spray the whole bike down with wd40 so it's covered in a thin film of oil. It prevents corrosion but the main thing is it prevents dirt from really sticking to the bike on your next ride and the dirt rinses off much easier afterwards. Another tip, instead of buying expensive cleaning products just mix some dishwashing liquid & clothes washing powder in a bucket of warm water, it works really well.

@craighogland8509 3 жыл бұрын

I've found a quick wipe with cheap "armor all" protectant does the same to keep dirt from sticking

@hectichive889 2 жыл бұрын

Nah man, that’s just too much. If you wanna good tip to avoid all this nonsense: Don’t wash your bike at all. It’s called a dirt bike for a reason, so let it earn it’s name! :)

@dirtyhooliganmx4337 3 жыл бұрын

Great video a lot of people don't realize the right way to clean a bike

@flashbang243 3 жыл бұрын

I am new to dirt bike riding and find your videos extremely helpful thank you 🇦🇺

@vaughnwilliams3600 3 жыл бұрын

you are the smartest and best looking guy on the internet lol

@burtonjnb 2 жыл бұрын

Amazing video! Love your mic. =)

@typrall9028 3 жыл бұрын

Rien de bien révolutionnaire. Il y en a des tonnes de vidéo sur le sujet

@ophx1337 5 ай бұрын

pointer finger mic goes crazy lol

@Danielxperez14 2 жыл бұрын

this is a really informative video! i appreciate the tips

@sergiomonohoma. 2 жыл бұрын

Love the mic!

@someonethatwatchesyoutube2953 3 жыл бұрын

My 2020 KTM 300 is almost 1 year old and has about 70 hours on it. I removed the seat/tank and thoroughly washed it after every ride but I broke my rad shroud on the last ride so I put a new set on. The new plastics really showed how badly the original plastics (and the rest of the bike) are beaten up. So screw it. It’s just a pressure wash to clear the mud from now on and I’m happy not to care about its appearance any longer.

@rtimetoride7645 2 жыл бұрын

I ride in the sand all the time and no matter what I never get it all off. I think it's clean and I'll put the bike up and the next day I'll look at it and there's sand on the bike! I agree, F it

@eriknash8783 Жыл бұрын

I wish I had a patch of concrete to wash my bike on. I live up in the mountains and its all dirt so I wash my bike on the stand over the dirt and then have to move it into the garage to blow and hand dry the bike over a wood floor. It's pain and all my neighbors are water nazis since I live in California and on a community water supply. I also get home late in the dark so rarely am I doing all this immediately after a ride... I guess we should have had kids, lol!

@jebediahnightlinger6357 Жыл бұрын

Just go poison their dogs, they'll be too busy dealing with that to worry about you.

@krrrruptidsoless Жыл бұрын

Note tape...cool

@MoreMoto262 3 жыл бұрын

I use Simple Green and a leaf blower, but I'll ride it up and down the street a few times to get some of the water out.

@sethmacgillivary1281 Жыл бұрын

Does simple green strip paint

@MoreMoto262 Жыл бұрын

@@sethmacgillivary1281 no, I used some other cleaner that did.

@user-pp5or5og4k Ай бұрын

Scrubbing bubbles has a polish component to it. Wouldn't that be bad on brake rotors and brake pads?

@jonnoMoto 3 жыл бұрын

I wish my bike was that clean after riding

@xlr8offroad 3 жыл бұрын

MX....

@sammomx 6 ай бұрын

Would it be a good idea to take off the seat and plastics and clean all under there because there is always a ton of dirt that builds up there that you can’t get off just washing it normally

@GeniusEnis 3 жыл бұрын

Where does all of your dirt bike builds end up? Maybe everybody in the US know cus they see them at a marketplace or something. But I’m from Sweden and I’m kinda curious.

@Backdoorslamfest Жыл бұрын

I must ask what kind of ski is that on the floor. Thing looked sweet

@miro_s 4 ай бұрын

Won’t the scotchbrite scratch the plastics, if not the frame too? And gosh it only takes 30 min! (For me two hours are barely enough for one bike…😢)

@pjexc5500 3 жыл бұрын

As allways excellent info love the video,s

@viperracing2889 2 жыл бұрын

Some put a plug in their exhaust and some special air intake cover. Do you recommend using these? To me it just seems risky to replace the air filter with a cover when the bike is dirty.

@jimmydickson8854 6 ай бұрын

I never use chemicals to wash my bike as it destroys the wiring connections eventually

@daviddunbar7702 3 жыл бұрын

Why not remove the air filter and use an air box cover?

@dirtbiketv1 3 жыл бұрын

For sure the better way to to do it-- most guys will never get covers for their bikes and its for sure quicker and easier to not do it.

@fortgreeneprojects1 3 жыл бұрын

Nice bikes as well real nice bikes.

@srt4driver181 2 жыл бұрын

What lube are you using after the wash?

@torr-michaelbennetta9785 2 жыл бұрын

Never understand why people power wash their seats. You have to gently hand wash the top/wipe it down. Hose or PWing just saturates the seat foam, and males it crazy heavy and breaks it down. Can't believe you lay the bike right down on the ground with no stand , Jay.

@AntiStressKit 3 жыл бұрын

Thank you for the video

@bjarnefrederiksen7866 3 жыл бұрын

The Honda’s front wheel looks like it is spinning really free. Anything special with it?

@dirtbiketv1 3 жыл бұрын

no - just wheel installed correctly

@td7124 3 жыл бұрын

Thanks for this

@haydenbaha 3 жыл бұрын

Can you please do a review of that Yamaha?? I saw it on motorcross action and curious how the 270 is especially with that air box cover.

@ericc90 3 жыл бұрын

Nice garage 👌

@jmnh2009 Жыл бұрын

by laying the bike. it doesnt leak gas?

@The2006200 Жыл бұрын

Not if it’s fuel injected. Or you turn the gas off.

@SLP-eb1wp 3 жыл бұрын

Show us how you clean a completely mud caked bike. The kind of mud that wont even come off with a pressure washer.

@ninjaarcades7356 Жыл бұрын

Excellent

@marioschristofi3145 8 ай бұрын

Thanks for sharing your knowledge! What lube do you guys use?

@hyposez1129 2 жыл бұрын

I have a question. My bike is ktm sx250f 2020 so all the electronics and battery are under the seat so what should i do?

@dirtbiketv1 2 жыл бұрын

blow it off with air each time you wash-- Email me further questions -

@hyposez1129 2 жыл бұрын

@@dirtbiketv1 Thank you for your answer!

@johnykryll 11 ай бұрын

Hey, which footpegs are on the Honda?

@tbgtbg6311 2 жыл бұрын

I like to rip the bike down the street a few times to clear out all water from engine and bearings etc.

@premiumdetail5349 3 жыл бұрын

Thanks sir

@calebdavidson7115 3 жыл бұрын

I have a 2010 CRF 250R Will the water not fry any of the wiring because it is fuel injected and it is more electronically done?

@nickg5275 2 жыл бұрын

So what do I do if I don’t have a power washer or compressed air

@dirtbiketv1 2 жыл бұрын

Get them-- -- for sure need compressor

@nickg5275 2 жыл бұрын

@@dirtbiketv1 damn guess I need to wait to clean my bike then

@dustin9035 3 жыл бұрын

None of that worked for me. You better show me again on my bike.

@krispewkrem3 Жыл бұрын

These bikes aren’t even dirty…. Dusty perhaps. We’ve got a nasty mud and clay that will stain everything red. No matter how hard you try, things will just turn red.

@-PlayMaker- 3 жыл бұрын

Is it bad if you get water in the airbox? I mean I know it's not ideal but will it hurt the motor if you start it with a wet filter?

@Recedinghairline180 3 жыл бұрын

Not unless it gets past the filter. Cover it with a plastic bag

@henrikforsberg683 3 жыл бұрын

There usually is a drainage on the bottom, remove the plug after washing and the water will drain out of the airbox. And the filter will also dry if you leave if for a while. But if you dont spray it to start with, you dont have to worry.. 😁 covering the holes or just avoid spraying close to them usually works good!

@danielcastelow7523 2 жыл бұрын

I don't use compressed air I use a leaf blower win I blow my bike down

@kennycouture2579 3 жыл бұрын

Awesome video, love the channel. Is there a reason to start the bike right up after washing? I've been told to not start it right up due to water getting sucked into the air filter.

@dirtbiketv1 3 жыл бұрын

We tape off the vents get little to no water in-- I like to start it and make sure any water is run right out - right away-- .

@NickW90 3 жыл бұрын

Have you guys had any issues with the kill/map switch on the honda? Hear of people having issues getting them wet when washing

@FlorentinoLoco 6 ай бұрын

Every time my bike is laid over to its side it leaks either Coolant or gas.

@charlottecolbert3707 3 жыл бұрын

Starting your bike right after you wash it is the worst thing you can do your sucking water into straight in the airbox swap filters before starting it

@boboleniczak1110 3 жыл бұрын

Do you have thoughts on spraying out air box?

@spoderacing3910 3 жыл бұрын

Don’t forget to wd-40 your brake rotors to help keep rust spots from forming. 👍

@billymcfuggin7549 3 жыл бұрын

I use waterproof grease on mine

@straightnobraker4677 2 жыл бұрын

blinker fluid also works well

@toddlemasters 2 жыл бұрын

What hour meter is on the Honda? I just bought a new 250r and am looking for the best option

@dirtbiketv1 2 жыл бұрын

Works Connection. And a mount from them works well. Email me with further questions. Contact info in About tab.

@toddlemasters 2 жыл бұрын

@@dirtbiketv1 thank you so much. I certainly will with future questions! Love the content

@qtlawzy 2 жыл бұрын

How often ane what would want you to change the oil

@sxfwilson6603 Жыл бұрын

Hi what alloy cleaner do u use

@dirtbiketv1 Жыл бұрын

Email Jay with questions. Contact info in About tab.

@everpedregon8988 Жыл бұрын

What are y’all using to clean the wheels ?

@justinelko588 2 жыл бұрын

Do you spray anything on the engine afterwards, such as silicone lubricant or WD-40?

@dirtbiketv1 2 жыл бұрын

Email Jay directly with any questions. Contact info in About tab.

@79series 2 жыл бұрын

So it's okay to lay a bike down. Does fuel leak out

@ryeann2567 10 ай бұрын

What a charming couple! Its so good to see a progressive, gay couple in the dirtbike scene. :)

@dylanhunt4162 2 жыл бұрын

You forgot yo use WD40 on the brake disks.

@LukeMorphett 3 жыл бұрын

I love how thorough you are. However, I completely disagree about using a pressure washer. All that will do is push water into places it shouldn't be. Like behind the o'rings of your chain, into your linkage bearings, or any other bearing for that matter. I agree that pro level riders do it the way you've described, but, most of them don't have to buy their bikes, have mechanics maintaining them, get a new one every year (at least). And it's important for their bikes to "look the part." For us gumbies, a hose and bucket will do. Its a bloody dirt bike, they are supposed to look dirty.

@classified0888 23 күн бұрын

Feels weird I’m spending money on stuff to clean my dirt bike to go gunk it back up in 2 days lol. But I guess you must wipe your asscheeks after taking a shit eh