First off, thanks for not having loud distracting background music inserted into your video. The table is a great idea Harbor Freight came up with. Beats their portable folding ones.

Northern Tool has been carrying this welding table & kit, for quite awhile. Same price during their sales. Also, I attached the short legs first, using the outside bolts only, then attach the longer legs directly onto the frame using the inner bolts. It creates a little stronger mounting point for the longer legs. Cut a piece of 5/8" or 3/4" plywood for the lower leg brace, and then you'll have a shelf to keep the accessories.

Excellent video (as of 9/27/23, not shown at HF yet). The flatness, hitch, washer spacer and the height are great takeaways.

Nice addition to the shop! I've been using receiver tubing under my work benches for years. It's sweet to be able to move a vise, or other draw bar mounted tool, from one bench to another. However, mine don't stick out so that I don't catch my hip while moving around the table. Also, rather than using a hitch pin, I welded a 1/2-13 nut to the bottom of the tubing and then used a 1" long hex head bolt to clamp the draw bar mounted vise in place. I welded a large washer to the head of the bolt to make it easy to tighten or remove by hand. This makes the tool much more solid than having a hitch pin holding it.

FYI, Fireball Tool sells a "Insert Hook Clamp" that designed for 3/16" tables like this. These minimize hole distortion from the clamps.

I'm a hobby woodworker primarily, but I do have the need to weld now and then. Just this weekend I made some lumber rack brackets with my little Titanium 125 Fluxcore welder. This would be an upgrade over throwing the fiberglass blanket over my workbench for sure. I'll keep my eyes peeled for this to become available to be sure!

Problem with any flat surfaces in my shop is they tend to get used as storage space for odds and ends. 😢😅

As someone who just made their own fixture table out of 1/2" plate and had to buy a mag drill and annular bits etc this is ingenious for someone on a budget. Only disadvantage I'd see is like you said, heat. I'd be afraid of warping this. As an idea I'd just buy this table to use as a template for my fixture holes. Sounds silly but perfectly drilling 2" O.C. holes by the dozens is very difficult without a CNC machine. It took me so much time to even get 79 holes and i need another 50 at least. I loved this video and see myself buying it for the same reason, an auxiliary table.

I have a table similar to that, but I bought mine a few months ago from Amazon. Mine is made by a different company, but everything that you got with yours, I also got with mine. I think it's a great table for a beginner like me. I don't do a lot of welding, I'm still trying to learn how to weld. But think for me, it's great for someone who is just starting to weld. Having all the things that come with the table helps you and saves you time from going out and getting al the clamps and other things.

I also made years ago a welding table of 1/2" steel that was given to me 30X72 that was a steel plate used to cover trenches in roads. I just drill the holes only as I need them not all of them at one time. I've had this table for 20 years and have only 17 holes drilled in it. I have built 4X4s, wrought iron fencing, golf cart frames suspension parts and many other projects and some how 17 holes have worked out fine and I can always just drill more as needed.

Nice video. I especially appreciate how you discuss your oversights and things you see after the fact that could have been done better. I think this encourages the amateur fabricator to "give it a try" even if they find they need to change things with time. Cheers.

I have started using casters that flip up. Most are rated for hundreds of lbs so roll well. when you want the stability of a regular leg you flip the lever up, the casters fold and the legs are solid on the ground. Best of both worlds.

Impressive weld table for a Harbor freight item and wow under 200 bucks I'm definitely impressed

This is really cool! Nice idea taking a couple of 2 x 3 table tops and making a bigger table! Now you should make a couple of drawers to stash all those pieces that came with the tables!!!

I have had this exact table for a couple years now, from another brand. It isn't a high-end unit, but it does what you need. Just wish they made a slightly larger one too... but bolting several together is a solid solution.

1:39 you may want to box in the bottom of the legs on the single table. I added casters to my welding table and with any weight, the tabs holding the casters on will bend.

Acorn tables are the ultimate for heavy fab work. I used them for years, and you certainly don't need to worry about grounding through them. They are actually designed to tack weld parts to them if needed. Of course, they are 6-8 inches thick and are various dimensions, 3x3. 4x4. 6x6. Whatever you need. And super heavy. But I do think I may have to pick up one or two of these. Good video. Thanks.

Can *ANYONE CONFIRM* that these are *actually 5/8 holes* ? I've seen several videos suggesting ordering additional clamps from Northern Tool. I own the Klutch branded table, and it is indeed *16mm* If that's the case, a 16mm peg won't fit in a 5/8 hole. (16mm = 0.629921 and 5/8 = 0.625).

6 months later, it is $189.99.

I’m now interested in doing what you have done. I currently have a wheeled bench about the size of what you have built which rolls under my 16 foot built in bench. I have been using receiver mounted tools for years. My vice, solid stock bender, bead roller, bench grinders and so on have been used that way for a long time. It’s a game changer. I’m building in my 24X24 two car garage where I also park our cars, so everything has to be able to be tucked away when I’m done. I actually got the idea for some of the tucked under storage from a set of Russian nesting dolls my mom has. The receiver idea came from a service vehicle I saw at work one day. Thank you for the down load on this new HF product, I’m going to check it out as soon as it appears at my local store.

A folding version would be awesome. Also, the 2” trailer receiver is awesome, I have one bolted to the bottom of my workbench surface and I have my bench vise and bench grinder set up to be used that way.

I flunked Latin in high school in the '70's, but my shop slogan is "Omnia debet esse rotis!" "Everything must be on wheels!"

For wood working, you could bolt a plywood top to it, then use the steel holes as a template to get holes in the plywood, which you could then use for clamping. That is a lot of utility for the price.

I bought a similar welding table in the UK and added a Flexispot height adjustable desk frame. It's amazing being able to tweak the table to the perfect height. Because it's so versatile I use it as a chop-saw stand, bandsaw stand, in-feed and out-feed table as well as a welding table.

I will definitely be buying 1, and quite likely two of these when they get released. I use the folding welding tables they have now with one converted to plasma cutter use. I like the idea of a plywood removable top for use as well.

The new table isn't showing up on HF's website. When will it be available?

I looked on every website cannot find one. The funny thing was is that I was looking online all day for welding table, and I just happen to run across your video and started subscribing.

When is HF supposed to be releasing these tables? I'm not seeing them listed via their website?

I have been wanting to get a fab table like this, thanks for the review! I wonder about stacking 2 sheets and welding them together to get closer to 1/2 inch?

I have 2-3 rolling platforms that I could set one of those on, or attach, this will be a great upgrade. And I appreciate the input on the build quality & accessories.

This is a fantastic idea. I've been waiting for HFT to come out with a dog hole style welding table for a long time. I have never liked the little slotted folding welding table they have carried forever. Huge fan of HFT. That store has evolved with their products.They get a bad rap. Awesome video!!!

I can definitely see harbor freight selling out of these fixture tables quickly! As a future upgrade you might consider installing a solid sheet of thin gauge steel or aluminum on the underside of the table a few inches below the surface with a lip on the front edge. Slope it forward so that any parts that fall through the holes roll toward the "front" and any metal fragments, grindings, etc don't just drop on the floor. Makes for an easy way to sneak a shop vac under the table and vacuum up metal pieces without them all over the floor and caught under the caster wheels.

As much as I love this, there is no way this isn’t going to warp. I have a raw cut 4x3.5” weld table that’s 3/16” sheet from my local steel yard I made my self and it’s warped with minimal heat input into the table with general and small projects. Especially with out the side skirts which add strength and rigidity. Good in theory, good in price. Don’t expect much long term.

Northern tool tells an almost identical welding table and has two versions of it. one is the "fixed" table like the unit you have in the video. the other is a more substantial table with casters, and a small pegboard to organize all of the fixturing items. I bought the wheeled unit and i'm digging it so far. it also has a low shelf on it that has been proving useful.

Dang it Nate! I don’t need any more excuses to spend money but you go and make this video 😂 a lot of ideas I had when seeing this thing you touched on and mentioned. Lots of very good info and valid points, great video!

I had no idea they had this! I can't wait to get one

I took two of them and mounted them to a 1000lb capacity hydraulic lift table cart. the height adjustment is nice

I have a vertical 2" receiver on my welding table to plug tools in. Best thing I did years ago along with adding a cheap 5 drawer tool box underneath.

I did the same thing when I built my fixture table top from Weldtablles, on adding a receiver for a vise. what I didn't like was how loose the receiver was, so I welded a 9/16 nut to the top of the tube and used a short bolt to take the slop out, and hold the vise or attachment with my chop saw or bandsaw on it

It’s a sad day when the low buck diesel truck no longer has a spot in the shop.

I've got an outside work bench that I built 4'x10' w/ a 1/4" steel top but I haven't wanted to bolt my vise to the top, so the receiver idea for me was priceless, awesome

I don't seem to find it listed here in central florida

Level your Aux table with your Fab table. Add a receiver hitch to your Aux table with a pinch bolt on the bottom as well as the spring clip holes. Add pinch bolts to the bottoms of the receivers on your Fab table. Now you can use a piece of square tubing to fix your Aux table to your Fab table in a locked but adjustable way so you can use fixturing on both tables for large parts like say a 6 foot by 10 foot roof rack or other large project.

Nate.....man, I love your videos and the stuff you put up for us, garage type DIY fab/build guys. Keep it up, and I always look forward to the next upload!

Very impressive nate, very interested in seeing where this goes. I still think a table like the Arcflat is a better investment, using more traditional tooling and meant to be easily bolted together.

Good of you to say, "it's me not the table." Great video and great way to adapt these tables. Thank you.

Okay, if you swap the top later, one option is doubling the thin tops to double the thickness. Also, if you upgrade to a thicker plate later, use a new one of these plates as your template to layout the holes.

I got 100%value out of your vidio thank you for sharing your experiences with us we count on them i recived my welding table last week and now you have made me so much more confident to open the box.Thank you 👌🇨🇦🇨🇦

The usefulness of this larger table, or some smaller joinable tables, should not be underestimated. Personally I would do the larger one like you have an have a smaller one or two (at the same level of course. ha ha) that can be bolted on as needed to make the L shaped bench. As you say, some wooden or steel toppings/small item boxes with dowls would be ideal since this also prevents slippage. Very very useful for small garage workshops. Great video Nate!

I bought the CertiFlat 24x34 table and I'd say that the Harbor Freight one is it's direct competitor. The CertiFlat is $120 more and doesn't come with accessories but, one thing to consider is that the CertiFlat has a rib system that makes sure it stays flat. Looks like the HF one sits on (what I'm guessing) is low gauge tube.

I am buying some of these. I have a steel bench, but could really use the added space and the hole pattern matches the pattern I have in my wood workbench

Fireball Tool has entered the chat.

A BIG BLACK EYE FOR HARBOR FREIGHT I have a Harbor freight TITANIUM FLUX 125 WELDER purchased from Harbor Freight a couple years ago. I am a retired plumbing contractor and backyard hobbyist. I love to build things in my spare time and help friends and neighbors that need something repaired. When I retired and closed my business, I had a stick welding machine but had no convenient place to connect it at my home! It would require an upgrade to my electrical service not worth the trouble and expense! When I saw a couple reviews on KZfaq for this Titanium 125 welder, I thought that would be the way to go. I already had a 110 Volt 30 Amp circuit to my workshop! It took me a while to get adjusted to the flux wire welding. I built a minibike from scrap pipe I had left over from the plumbing shop. The welder allowed me to make other things and make repairs for others I wouldn’t be able to do without it. In the middle of my last project, I cut a couple pieces of metal and got ready to weld them and when I pushed the button on the welder, nothing happened! It was dead! The fan did not come on but the light on the ON/OFF indicated there was power to the welder. I checked the manual for a reset button or a fuse and found no mention of either. So, I called the Harbor Freight 800 number and was told there was no repair for this welder. Harbor Freight has no repair facility, and no support is available. I was told by two different tech reps there is no schematics or parts list available from the factory where this is manufactured. “It is not worth getting it repaired and cheaper to go purchase a new one!” If you purchase this welder or many other things from Harbor Freight You only have 3 Months Warranty. It is considered disposable after that! All the reviews and discussion I have read about HARBOR FREIGHT I have never seen anything about their total lack of support for their products! I didn’t even get an “I’m sorry” or any offer for a discount on a new welding machine! I am retired, was an electronics technician in the Navy, active Ham Radio operator and electronics hobbyist. I feel like the electronics in this welding machine is straight forward non computer controlled and any decent electronics tech should be able to repair this given reasonable support. I removed the circuit board from the welder and found where a small component burned of course not knowing the component value or purpose will make it difficult to replace. Providing a schematic and parts list is a very inexpensive form of support that should be a minimum requirement. Their claim to revenue of 7 Billion Dollars tells me they could afford it! Leland Cox

Thank you for the video on the table, it is just what I need, can’t believe my subscribers haven’t commented how sketchy my little 2 1/2 x 21/2 ss sheet metal is, the only good thing about it is that it does roll around, thank you for the review 😀😀

This would work for any or several types of workbenches. The top is made from anything from a single sheet of 1/8 inch hardboard or a piece of carpet to keep pieces from falling through the holes to complex fixtures in a manufacturing plant. I can see it being used for fixtures to do repetitive glue-ups in wood. With all these tops and fixtures hanging on the wall waiting to be used.

Curious as to why you didn't just bolt the tops to the frame you built and toss the HF frames.

I don't see this table on the Harbor Freight website. Can you provide a link?

Hi there man! It`s been a while since i visited your channel for tips... but this review of those welding tables i find it very helpfull in order to get or fab your own welding table for your needs. A while back ago i made my own welding table using square tubes 40mmx40mmx2mm and i been thinking about purchasing one of these table to use on my projects outside of my shop (in the field). Thanks again for sharing this review and cheers from Chile!

I drilled my 30"x60" table a couple years ago. 2" on center and it took forever. It was around 430 5/8 holes. 8ish hours and 2 roto-brochs later it was worth it.. but took forever😂

I absolutely LOVE your channel. To the point that I want to start over landing. In order to do so, I ordered a lift kit from ROUGH COUNTRY. I AM POSTING THIS AS A WARNING TO EVERYONE..... I purchased a 4" lift kit for my 84 Ram Charger. I was told that it would have EVERYTHING that I needed. Well, the front sway bar links, the rear u bolts , and shackles all had to be repurchased due to the lift, being more of a 6" lift. So, it is a bit taller, but my husband is a double amputee, and this causes a problem.... Not including the $248 in parts that I had to purchase afterwards. OK, so I called RC directly and even though he agreed that the wrong parts were in the box, he REFUSED to help in any way! We live on a tight budget, and this f**ked me over , HARD! I just don't want any of you to have to go through the extra money, and crappy service!

couple thoughts: 1) this will be perfect for the kid, who is getting into welding as a career. he already bought his welder, cart, bottles, and I got him the other HF welding table, the one that folds up. this would allow him to start practicing fixturing work as well. 2) these would be perfect for appropriately sized fixture setups that, you want to keep configured but don't need all the time. you could just buy one of these tables, make your fixture setup, and leave it alone between projects. 3) this could be great for intermediate fixture setups; you're doing a big project with lots of smaller assemblies that are all the same. you set up your fixture to make those, then use your fancy big expensive table to line them all up for final assembly. 4) having to shim the top to the frame to fix flatness issues... it's HF. It's $170. It's worth the hassle. :D 5) for your receiver idea... put in mounts under the table to store the tools. convenient storage, and it'll help add mass (as if you need it!)> 6) then you'll need an integrated power strip for some of the tools to plug in. :D

I made those type clamps from the HF cheap clamps and just welded 1/2 bolts to the shafts I had $80.00 clamps for $7.00.

Great Vid and Awesome Content! The new Harbor Freight Welding Table is now something I need for the garage! Well done Sir 👊

the hitch receiver is a fantastic idea, especially if you don't have alot of space. I have quite a few tools that I have hitch tubing welded to, and I swap them out on my single vise stand. Yes, it's a little bit of work to swap out tools, but if you don't have alot of room to work, it's fantastic. I suggest adding threaded set screws (welding a nut to the tubing) so that you can snug up the bolts and the tools won't flop around on the receiver tube. the hitch pin keeps them from falling out, but set screws/bolts keep them from flopping around when using them. :)

That table is going to sell itself. You are right about how convenient it is to own such a fast table

I had 2 from Texas Metalworks and used them for everything. They were great. Whem i get a space and able to replace them i will definitely take a look at these.

Thank you for letting us know about this table from HF. I have always wanted one, but it was too expensive. The HF option with a little TLC can suit my needs quite well.

I don’t see this at my harbor freight. Is it that new?

I wonder if you could put 2 of these together to make a thicker top. It would still be cheap compared with other table options.

Just add a metal plate spacer in between the casters and your fabbed up table frame to match the height of the little table.

Amazon in canada has the same table from vevor for 181 canadian or around 125 us.

I built my own 5’ x 108” 3/4” thick top table. 6x6 1/4” thick legs and I beams for stringers 2600# . Still haven’t finished drilling my holes. Hopefully this winter. Nice table for the money

Thanks, as a hobbyist, this table maybe the answer for my needs.

With a sheet of 1/2-inch MDF on top this could do double-duty as a table saw outfeed table for those of us with limited space.

Awesome as always.Thanks for sharing and taking us along

Awesome video Nate, gives some good ideas and plans for what I need to do. Thank you bro

Great video. When will it be available at HF? Website doesn't show it.

That's a great deal for that price and I can see it bring very useful in my barn! But as flat areas always seem to get covered up around here. I have space in the barn if you wanted to keep the J10 out of the weather.

FABULOUS!!! I'm looking to build something very similar to this...would only need 2 of these tables for the size I need. GR8 vid!

This isnt a bad deal. Might have to buy one to throw on the end of my current 3x5x1/2" fab table. Make it foldable so its "protected" and smaller foot print when its not needed. Then when i need fixtures, fold it out and bam its there with another 5ft of table to to hold stuff up.

When and How mUch are these Tables going to be? There Not Available yet...

Same thing as sold at Northwest Tool over the past few years. It was similar price on sale and included same accessories. I added some light angle ( old bed frame tacked corner out) across the underside between rows of holes to reduce any warpage.

Hey nate, what's the item number? I'm not finding it on the website yet. Or have a link?

Don't see on website. Link please

I bought a similar one from Northern Tools a month ago. I wish i knew this one was coming. The Northern table top is stitch welded to the upper frame and a little warped from it. Not as flat as the HF one.

Damn man thanks, perfect for a tiny shop.

I'm going to get one. Instead of getting an expensive just get a friend like this guy with all the tables and skills.

Ahhh it's good to see a notification that you uploaded a new video!!!

I may have to pick one of these up

I just picked one up today. Might get the change to weld up a little heavier duty frame for it later this week and give it a try.

Dood. I need that. Totally putting that on my shopping list. I don't need no fireball tools 10K table. That thing would do someone like me just fine. I so love Harbor Freight.

Any idea when it will be available cant find it on the website?

I don't see these on the site yet. What state are you in ?

I actually have a 3/16 inch fixture table that I made and had laser cut, and I use some custom clamps that I made for hold downs, and they don't distort the holes at all. They go in to the holes and then side load whenever you clamp them down, and it works just fine. You obviously can't go hog wild on it, but it definitely will hold things in place to where you can't move them.

12:30 was a GREAT piece of advice! Thx for sharing!

I bought this at northern tool a couple years ago. Bought 2, same price. Love it.

I have the Northern Tools fab table. Same table different box. I use it as a work bench from time to time. I use a big piece of cardboard to cover it. Works fine.

Okay, I must have this table. Thanks for the review.

Honestly if you don’t mind slight dimples on your work surface you could just buy some heavy duty vinyl and roll it out on top for when you have small stuff you don’t want falling through holes. You could also use some large hobby cutting mats that have grids and stuff printed on them for extra utility and durability.

Looks identical to the Klutch welding table from Northern Tool. I picked one up the other day on sale for $169. Went back to get their fixture kit and decided that a second table was a better deal. I’m currently looking to fab a way to mount all the fixture accessories, and possibly get it to fold.