The best part of this video was seen Aaron,Man Behind the Seen doing well, love having and seeing him around! Great work Dirt Perfect !

How nice it is to have "the comedy hour " back....made my night.

We have a saying here in Northern Ireland, "never cast a clute till May's oute" that Ulster Scots lingo for don't take your coat until May's finished

Mike it's a joy to watch you Matt and Aaron working together.

Paint the chain and the back of the plow bright yellow and every foot and chain link in black. You'll be able to see it even on the darkest of day's. 😘👍

Welcome back Arron. Looks as though he is in direr need of an angled scrafing tip for the cutting torch for that kind of cutting clean up work.

Washing that out seems like a perfect job for the air arc.

Angled scarfing tips help a pile when you have to wash out weld in a tight corner

I learned an important safety tip today. If you're taller than your weld area a ball cap works fine but if you're shorter than your weld a full face shield is the way to go.

Hey Mike should you install gusset plates to help strengthen those welds, probably set the gusset plates on a slight angle to keep dirt from building up on the gusset plates which will cause rust issues, you guys did an awesome job engineering that plow & putting it together, and seeing how well it put pipe in the ground, I sooo enjoy your videos, keep them coming thanks Mike

Had been wondering about MBTS…, the opening scene of MBTS…, his laugh & smile are like no other…, and loved hearing & seeing him…

Okay. The Keystones Cop type music seemed so appropriate. Lol love watching you guys work together. If you can’t have fun and get a job done , it’s almost not worth it.

Mike will never have to say "Let's cut twice and weld three times." BTW that red bracket is not to hold a fire extinguisher. It is for the emergency 2 liter Pepsi.

I see Aaron in a Kiewet Sweatshirt. In the 60's my dad worked for Pete Kiewet and Sons in western South Dakota where they were building Minuteman Missile Silos. He was responsible for radio communications.

sure Mrs. DP has to wonder if having the shop right there to keep an eye on Mike is always advantageous!

58:00 was the most usable price of educational advice I’ve ever heard!

Mike Matt and Aaron great video! Thanks for sharing! Kevin

Idea for marking the chain, on big ships the anchor chain is painted different colors at strategic points (1ft, 2 ft, etc). All you have to do is see which color is touching ground to know where you are. Blast one link every ??? easy peasy.

You could spray paint white numbers on the back.

Wow, look at that day Matt, Aaron and you all together again, great video we’ll see you on the next one. Thank you.

I really love that you guy's modify your equipment to work for what you do! Makes for fun video's as well!

Mike, may your chain never get hung up on anything! LOL!!! J.R.

Another great vid Mike…thanks!

Have Aaron Carbon Ark them numbers in the back of the boot so they’re recessed and then paint them bright yellow

Have you thought about putting a mark on the end of the pin so you know the hole position as you drive it in? This way when you have it out more so you can twist it easier.

Very enjoyable video. I can see you put a lot of work put it together. You always let the people shine when your together.

Hi Mike, I would suggest you paint the guide/measurement chain bright orange so you can easily spot it from the cab.

Brilliant work and thanks for sharing this with us take care

Great show as usual. Love to watch your innovations.

Love it! We all keep learning and that is one of the great things about the Dirt Perfect Channel! Great video! Thanks Guys! Lee

Good to see MBTS is back,but you guys are having way to much fun

Good to see mbts work and more work

Glad to see MBTS back. That project is amazing y’all work well together

Fan freakin tastic! Great to see MBS back in a video. Love the bantering between you all. I've said it before.....your videos are like coming home

Great to see MBTS back for warranty lol nice to see all three of you gentleman back together hope to see more of it 👍👋🇨🇦

Excellent work Mike, Aaron, and Matt.

👍👍👍 The tile plow is a beast MTB has to warrant his work, I mean he's the man Right? You guys are great to watch together makes my morning coffee much sweeter.

what a great leaning video. Thank you all. Its got to have a name.

Glad you caught that crack before it got critical, Mike. Just goes to show the importance of regular equipment inspection!

Hey Aaron, talking about perfect, I was talking to Mike the other day and he told me that until quite recently, he was convinced that he was perfect! It ends up that he thought that he had made a mistake …but he hadn’t!

im so late getting here been bizzy. got me a big smile seeing mbts and him grinding on ya. such fun time watching ya fix a little weak point. cheers guys.

So nice to see MBTS back he is a hoot your so blessed to have such great friends and Matt as a employee sure takes the stress out of everyday life when you know they are there and have your back 😁👍🇨🇦🇨🇦🇨🇦

Awesome awesome video. Very impressive and too many positive thoughts to list! Enjoyed the vedio ❤️👍👌👌

Welcome back MBTS hope you will get more time in the future to work with DP… you are a good team together… arguing like a couple super fun but still serious work being done…

Nice improvements and upgrades/repair 👍You are multi-talented with a great crew.

The platform for controller looks great keep up the great work

Matt always entertaining watching you and Dustin, I cannot wait for the next one.

It is fun watching three best buddies working together.

Just a note. Don't separate the Velcro before cutting it. Saves a lot of time and effort and both pieces end up properly aligned.

I agree with you Mike I would have put gussets on it out of 3/4" just as a precaution. Obviously, a monumental amount of stress right there.

Love the banter, workplaces these days are to clinical just retired and my favourite days were working in the post office over 35 years ago when you were allowed to be an individual and not confirm to what everyone else wanted.

One of the best if not the best “industrial” video on KZfaq. Many thanks guys.

Thanks Mike, seeing the three um Amigo's working together was great fun! You did a great job designing and fabricating your in cab equipment shelf. There is likely to be some vibration noise in the cab but you can mitigate that by using some 3/8s rubber automotive hose, slice it length wise so it slides over the contact point of the stand and the dozer. I sure appreciate the time and effort you put into your videos. Thanks from Canada

Was great to see Aaron again. It is always great having him there and working with Mike. Good to see Matt there as well, as you are all getting the big mean green machine taken care of and back to working order. taken it you replaced the Hydraulics as well?? wondering how Jerry is gonna take to the extra controls..??Like the idea of the marking on the digger, and thinking engraving is the best way to go..on the chair just put on differtent colored zip ties on it!

Good to see the crew back together again… even if only a fleeting glance at the Cap’n! With the official guarantee of MBTS warranty work… I think you can safely say, “That ain’t goin’ anywhere!” I liked your controller module. It’ll be so much easier to setup, use and take down! Just one question… “How come you didn’t test its fit with the extinguisher in the comment generator?” LOL Fortunately, you were able to take advantage of Mr Millenial’s BS of Velcrology from Hook & Loop University. Without that, you’d needed to issue a Public Service Announcement when your PSA failed! Everyone needs someone who has BS to help, every now and again!! Thanx Mikey, for the giggles.

Hi from uk Mike and crews👋👍 its amazing the plough never fully separated seeing that stress in the weld😵 but you got it sorted and hope no more issues am just pleased you inspected it 👍 control unit looks like it was always meant to.be in cab now did good job on that but you just be careful with those fixings (we both know how you and stray fixings kinda loose each other in the moment😂🙈) many more good jobs to come for the attachment tho 👌great guys, thanks for your your time and be safe see you soon👍👋

Great video 👍 Good catch on the pre check inspection,the saying is "it's only as strong as the weakest part"but improvements are on going nice to see Mbts😅

A little dirt in my coffee this morning is always a good thing... Glad to see you found and fixed a problem, as well as the upgrades with the plow... Also nice to see the man behind the scenes again also!! Very nice video... 😎👍

I was going to rag on the Rube Goldberg box. Instead you are so lucky to have a great team of people around you. MBTS had me laughing out loud.

It was a treat seeing you guys working together, even though briefly.

Good catch,would have been bad if it broke out in the field.glad to see MBTS back for a while.just keep doing what your doing and carry on.👍👍👍😎😎😎

Great seeing this video after watching the latest tile plow upgrades. Very impressive, love the can do attitude!

Great video Mike and MBTS and Matt 🇺🇲

Another brilliant film. Thank you.

Secret to a successful growing company is great employees and Mr. Dirt Perfect is doing it right!

The new adventures of Abbot and Costello!

3M Dual-Lock tape will work for the joystick. It has a very strong, stiff lockup which should not work loose from a bumpy ride, while still allowing you to remove it by hand prying.

I'd like to see you add some more gussets there. Possibly at the bottom perpendicular to the new welds.

from the Netherlands 🇳🇱 thanks for the video DP

Great job on the plow build. I'm impresse

We always used 1/8" 110/18 for high stress areas on rock quarry equipment. Enjoy the videos and your channel, great content Mike and crew.

Y'all are nearly as entertaining as ole Clint & Kevin. Love the "field expediency engineering".

Love the changes, I would suggest taking like a 1/2 “ dim. Drill bit and make reference marks / indent dots for depth markers then paint them with glow paint. 2 for 2 ft. 3 for 3 ft. And so on. Just suggestion.

You have that Stan and Ollie music going,, love it

I think you should paint each of the depths on the chain you are referencing with neon paint!!!

Enjoyed the video. Awesome job guys. Hey MBTS.

Far as marking Depth gage on your Digger, if what you have now doesn't work out, considered buying some stencils and bright spray paint. They come in many different sizes. For best visibility, use 4"-6" size numbers & high contrast paint. Canary or fluorescent yellow should be great against Olive green? Love this group of Amigos. What a hoot ya'ii can be!

I bet these welds behind the scenes will hold up much better! Love the Portable Control Center Console sumthin sumthin thingamajiggers. Plow away guys, plow away!

Maybe paint each foot of the chain using alternate colors

Mike great video. and I watched it all Arron knows his welding. and you are good at designing and that is why I watch your site, you and Arron work well together

For your spot depth indicator, you could just paint each square a different color.. loved the video.. Thank you for sharing...

HEY MBTS is back :) Nice to see you buddy

Looks great.

MBTS you see DP' s weld didn't hold. Now you have to fix it correctly. Lol God bless

Good catch on the cracked welds! MBTS singing was better than mine, I couldn`t carry a tune if it was in a bucket! lol I have used those same kind of man-scissors myself! Take care

For Matts measurement idea on the back if the ripper, you could always paint the 1 foot block between the 2&3 and the 4&5 a different colour. Either black so its not too obvious or go full HiVis yellow/Orange so that way you know the bit where the 2 colours meet is the foot marker. The paint seems to be holding up well on the back of the ripper so it should stay good for a while.

The THREE STOOGES are back together! Yeah! Good video guys.

Good to see Aaron! Nice fix on the crack. Thanks again for explaining why you are doing things. For the chain how about painting it and just use Yellow or Red on the footage link?

nice maintenance update.

Great job free hand cutting knew you could do it.

Great job guys.

I really enjoyed MBTS and you back together I miss him in your videos. To bad Aaron has to eat and provide for his family he could be there more. Great Video Be good be happy be safe

Good videos thanks for sharing your story with us and day

12:10 Practice might not necessarily make perfect, but practice sure does make permanent!

Mike, you guys are the Poster Child delegates for American Ingenuity and Backyard Engineering.... it's folks like you, your entire circle of friends and acquaintances on an off YT... that Make America Great Always! 👏🏽👍🏼☺️

Hey this will be a good episode Aarons in it lol. I think you should have called Kleeman to weld that Control box holder LMAO

Nice to see Aaron back.

Try a centerpunch for engraving the lines and numbers on the plow.

I would be interested in the PSI is on the forward end of the ripper is. That has to be a lot of pressure. Great videos.

Good morning DP and MBTS, wow such great motivation before my labour day project. Greetings from Jamaica 🇯🇲😎🤣🤣🤣. Let's do some welding boys. 🤗🤗🤗