The beginning of the video was hilarious. Jason, Todd, and Aaron are a cast of characters. You're lucky to have friends like them.

Love the banter, like you say good friends make life so much easier.

The three of yous oughta take that comedy act on the road LOL. Thanks for taking us along for the ride Mike.

You have awesome friends Mr Dirt Perfect

What entertainment ... a movie with action, some violence, suspense, and of course a cast of "stars !" I truly believe this deserves an ACADEMY AWARD, an Oscar ... no not what your thinking but a "weiner !"

You must be a great person to have great friends like you have. You and family have a great and save Christmas.

You all had me laughing and to me that is why I watch your channel! Well along with the moving dirt and all! Great bunch of guy's doesn't hurt!!

That was awesome 👏. I was really blown away with that video. It was so funny 🤣 especially when you put man behind the scenes bonus footage in. But you have a awesome lot of friends Mr DP. Take care and stay safe ok.

I never laughed so hard in this video Mike. Aaron's cameo performance was priceless. 😂😂

Love the video, including the first part!

Excellent job. Great work ethics. The only way to have good friends -- IS TO BE ONE!

one of your funnest videos. Keep up the good work

i think great you tube viewing keep it going love watch this programme it nice see you have friends like you got laughing all day

Its painfully obvious ya'll aren't actors! I was laughing like crazy none the less. I bet that was fun way to do something a little different. Good stuff!

A hone on a drill would keep the hole round and really smooth like doing an engine cylinder.

Well said sir. God is good and puts amazing people in our paths. Plz make sure you show plenty of thanks to the wives that tolerate y’all investing so much time into these videos and work etc. they are amazing ladies to stand behind and support y’all and they deserve the thanks more than we do. Thank you sir for what you do in taking the time and effort into sharing your lives with us. I really appreciate the quality content and clean language and fun. I almost always learn a thing or two and appreciate the great info you share in these videos. Until the next ‘“warranty” claim… Stay safe and God bless.

It sounds good. Great video Mike like how u get along great with ur friends. Thank u.

I thought it was a fun video, I always enjoy the banter between friends.

You guys had too much fun with this video!

Intresting start to the vid 😎. Who needs companies when you've got a good pal like Mr works a lot 👌 💯

Enjoyed this Video almost started out like a soap opera you know the new one coming out as Derby turns lol

I love the humor between you, and the fact that you show all sides of running your own business. It makes it a little easier for the rest of us to laugh at our own problems. Stay safe all of you.

Awesome vidio love watching you guys very entertaining 🎄🏴󠁧󠁢󠁷󠁬󠁳󠁿

Great video. You guys crack me up. I watch all your videos. Thanks for letting us into your lives.

Great video Mr Dirt Perfect

Great job looking great keep up the good work love your videos thank you

Just watched it 2 years later! Freaking Hilarious! I loved the outtakes also :)

Awesome video. Good friends!

I agree there is nothing like good friends to come and help when needed

It's always nice when you can count on your friends to help when needed. God bless y'all

"Goofy" good... Loved it. Thank you sir.

Well I woulda, coulda, shooda. Lol. Nuff said darn thing is fixed. Great job. Love your videos. Thanks for sharing.

What a goofy and fun video enjoyed it a lot. Thanks and keep up the great videos.

Live and learn is a big process with me not always the most efficient but you do what you have to. Great and funny video thanks for that. Stay safe

Rust will always get you. Jason is a great guy. Great friends are hard to come by. Sure Aaron would have been there if he could have. God bless

Great bit of vidja. The time spent on this was not wasted.

Mike definitely one of the best video's of planning and executing a repair. Loved how you had MBTS videoed, that was great !! Made my day watching it :-)

Great video. Great friends are truly priceless. I definitely agree about grease fittings. Love watching videos while I’m at work lol

Good video. I bet Jason would agree that a machinist best friend is Emory cloth lol.

Good funny video hope this has got it fixed

I worked on a lot of equipment over the year and I always think of different ways things should have been made , but for the must part overall there’s a good reasons for the way things are made until you’re the one fixing it. Thanks for the great videos stay safe

Quite the warranty repair, machine fixed and some nice tools for the shop. Wish I got that type of service. Lol Awesome friends! One suggestion for those pins and machined surfaces that are exposed to the weather is a light coating of anti-seize. The anti-seize directly applied to the surface before greasing seems to reduce corrosion and rust for a much longer period of time. I actually have an F250 axle housing with the hub off, it's been apart for over 2 years with no rust, all wiped clean and just a fine coating on the axle threads and bearing surfaces with a plastic shield leaned against it to keep direct rain off, that's it. Just a thought.

Thanks for all you do to put this video together. As always be safe and Merry Christmas . :)

THANK YOU FOR SHARING!!!

Your right,you do have some awesome friends,your blessed to have friends!

Thank you

You guys are awesome.

Looks like y’all had a good time learning something new! Y’all stay safe!

Really enjoyed this video. Making a laborious task fun is always better.

Just going through some of your older vids and, WOW! I'm going to be up all night and into tomorrow. They're all too interesting. Be blessed my friend, good work, good content.

Jason works alot is an awesome friend

Ahh... PPC! What every supervisor needs! Pringles, Pepsi, and a Chair!

i would like to thank you i learn a lot from your channel so thank you you and keep the videos coming.

Awesome beginning to the video with the warranty claim and the blooper at the end was the icing on a great video. Great work to all of you. Thanks

Great video thanks for sharing have a great day and stay safe out there

Loved the video! I've been watching videos from the past and have enjoyed everyone of them. You have a great group of friends working with you which is priceless.

Gday dirt perfect I love the close-up action you give us showing us the closes up of the pitted inside the boom how bad it looked so I love your work bud have a great day

Great video, Jason is a good friend. Thanks for sharing. Kevin

Great 👍 content nice to see.

Great show and informing.

I am thoroughly impressed with the amount of maintenance on you equipment! I worked for a concrete contractor who did not repair anything just drove everything into the ground and when it was beyond repair would park it. He had TLB that the brakes went bad and wouldn't repair, I always got the job of driving it thru town to different job sites, got lots looks of terror when they saw a Dynahoe TLB rolling up behind them dragging the loader bucket to stop. They had Cat road grader that had pony motor to start it, the starter went out of the pony motor. They would hook up an old Dodge pick up to the front of the grader with a chain put the pick up in 1 st gear and the truck tires would spin hop out run back to the grader push the clutch in on the grader get it rolling with the truck drop the clutch on the grader grader would start and lower the blade to stop the truck. Hop out of the grader and run to the truck and push in the clutch disconnect the chain. But he did have a Mack dump truck and Mack tractor and they always ran!

Don't forget the weightof truck and trailer to haul the tools

I really enjoyed the beginning and the effort you guys put into it!

Cute story line. Love seeing the crew together!

Hi production value. Derby is the new hollywood!

Loved it!

I know that even though this is dated today this was done some time ago. I would have used brass washers between the cylinder and boom. I hope his action is repeated but if so there's a suggestion for you. MBTS just cracks me up. His interactions with you are highly comedic. Thank you for this and keep them coming.

He makes the only videos I don’t mind watch for hours at a time. This vids are so entertaining and kinda educational. I love how interactive he is with the camera and talks ab the jobs and what not

Cool watching the machining and the work. You guys are a riot!

Great intro lots of fun to watch. No serious blaming just get the dohickie fixed, love it.

It is nice to have fun with friends that can play along without a script , just talk, but when in need of a solution , the boys step up ! fun video and got stuff done !

After y'all line bored the arm, which direction did you put the bushings in? Grease groove out, but you need the clearance between the outer movement to be small enough that when greasing it actually goes into those two pin bushings. If not, as I wrote two weeks ago, just drill both sides, tap, and put in separate grease zerks. But, some of those pins were not ment to move, pressed in pin that does not move, that is why there were no bushings in the arms. That is why there are bushing in the cylinders to be greased. The only way grease would be inside the arm, was wear at the pin that allowed grease the bypass when greasing the cylinder bushing over the years. If it were meant to move there would be a zerk at those points on the arm. But if you don't drill this and tap it, it is going to happen again...stop that pin from moving in the arm..! If you continue to want to grease that pin in the arm, is it your intention to fill the entire arm with grease? Y'all know it is hollow, from the top to bottom right? That will take a lot of grease ..lol...

First thing that came to mind on cleaning up that bore was a piston hone - the kind with 3 stones and spring arms. That would be perfect for that. Yes you have great friends that have many skills. Thanks guys for being there for Mr DP.

I love how you get everything done and have fun! Love the content. Awesome 👍❤️❤️

Mr DP this one was awesome, i stay tune for the next one! Thanks you.

I loved the beginning thought if was a great laugh 😅👍

I'm surprised the warranty department didn't send you to the complaint department

Yeah was fun watching

awesome work. gotta love fixin things

Great video y'all have a great one and stay safe 👍

Appreciated the effort you put into this! Actually, you and the guys. What good sports!

Well done!

This was fun to watch.

You’ve got good friends man, glad you got her back in business!

Fun Video DP! I'm excited for Jason to get out there (if he isn't already). Awesome little KZfaq community you've all got there. Keep up the good work!

That was a great video.

That was quite a production.. LOL Also, I agree that there should be a way to get grease back in there, along side that pin.

Excellent

Always enjoy watching your channel

Ur channel is the best on utube

Mike you're right you have got some great friends. The first part of the vidja that's what Wade calls it was funny. Thanks for the laugh. Take care and have a blessed week.

I've been waiting for this video!

glab to see you got new tools i did maching for hobby now that im retried i get to use more offten

Mike, love the videos and as always keep up the great videos and work. Jason works alot , and man behind the scenes make the videos great also.

Awesome video

Great video, You have some awesome friends.

Now you need a seat cover and she is good to go, good luck stay safe, cheers from Wyoming!!!

Salute Dirt Perfect! 💪🏾💪🏾💪🏾

...good one, stay safe...

Great 👍 job 👍