Disabling AVC on your Spektrum SRS6000 DX5C radio receiver

Рет қаралды 23,299

5 жыл бұрын

There are a couple of ways of turning off AVC on your Spektrum radio receiver. Example shown here is the DX5C with SRS6000 receiver.
#Spektrum #AVC

Пікірлер: 72

@zubski 4 жыл бұрын

Thank you so much, this has helped me so much, even after a year since you posted. I did not know about the trigger pull/push and steering right/left.

@2XRC 4 ай бұрын

I can’t believe I only found this now. Lol. After so much frustration with my Losi Tenacity 😂

@daviddemingjr3507 4 жыл бұрын

Thanks for the great vid . Helped me out 👍

@ddotdrawdoow Жыл бұрын

Dude you are a rock star! Thank you!!!

@briancarpenter3923 3 жыл бұрын

This video was very helpful. Thank you. I kept turning AVC to Inh (Off) but it still handled oddly.

@useless844 3 жыл бұрын

thank you just got a srs6000 for my axial scx10 iii and this worked

@modularrc6428 4 жыл бұрын

Great video and very informative! I figured this out a few years back when these spektrum avc receivers starting coming with several RTR 1/5th scale rc’s. Unfortunately AVC and gas powered kill switches aren’t compatible together, so I had the scrap them for non avc receivers. Great info nonetheless!

@dungeonracer4288 5 жыл бұрын

Thanks for the video. It works using the DX2E radio as well :)

@RazorRC 5 жыл бұрын

dungeon racer awesome!

@IonNight 4 жыл бұрын

Thanks. Great totorial.

@jarek.o2663 5 жыл бұрын

Thanks. Great video, you so my problem :)

@RekkrRC 5 жыл бұрын

Thank you! I just comped and it was killing me!

@RazorRC 5 жыл бұрын

glad it helped!

@ReadySetRC 5 жыл бұрын

Great info👍 I usually cheat and do option 1😎

@McFly_FPV 5 жыл бұрын

Thanks alot man that solved my problem, subed 🌞🌞🌞😎

@RazorRC 5 жыл бұрын

McFly glad the video helped, thanks for subbing!

@RCNennox 3 жыл бұрын

Thanks for this Video! I was struggling with this AVC. :)

@derka5581 4 жыл бұрын

Thank you!!

@bensp1193 3 жыл бұрын

Just so perfect video to full disable AVC especially with Crawling vehicles and using all channels. Thx.

@RazorRC 3 жыл бұрын

Glad you liked it!

@GreatLakesRC 5 жыл бұрын

Nice motor and ESC combo! 🤪

@motortoys9942 4 жыл бұрын

I've hit 85 on 4s only with this setup

@westsiderider7745 4 жыл бұрын

Thaaank you!!!! Gosh

@DanPRC 3 жыл бұрын

Question. Can you duplicate a rc so that it has 2 models on 1 radio but wth AVC on one and off on the other without having to rebind when switching the models? I have the InfractionV2 with the handbrake and I added lights to it. I usually run a light switch off chan3 but the handbrake is already there and since I have AVC activated I can’t use the other two aux channels. So is it possible to have the infraction in model 1 spot with AVC on and also have it in model 2 spot with AVC off?

@RcOffroad9513 5 жыл бұрын

Holy $#!@ thats stupid! I dont have any spectrum but have enough trouble trying to figure out my m11x radio. Great "how to" video!

@henrymartin4137 4 жыл бұрын

thanks bro

@PaoloNg6201 5 жыл бұрын

Thanks buddy! With method 1, the aux 1 is basically unusable. It is set to control the gain. I need to use all five channel so I have to use method 2.

@RazorRC 5 жыл бұрын

Ng Paolo awesome, glad it helped!

@rcpatapouf 5 жыл бұрын

Interesting

@alpine_pro5814 4 жыл бұрын

Will dx5c work with Killer Bee switch now for my gasser?

@00godlovesus 5 жыл бұрын

Yes cool:)

@steffie.morris 4 жыл бұрын

Hi I got this radio and receiver as a present and was already able to disable avc but wasn't sure I did it correct since I still have problems. Tnx to your video I know I did this part correct. I only have old servos and none of them correctly on the srs6000. Once connected they all jitter and vibrate constantly. And Don't move smoothly. The servos work perfectly fine on other brand radios. Can the srs6000 not handle analog servos?

@RazorRC 4 жыл бұрын

I think the SRS6000 only works with digital servos, I never tried it with an analog one.

@barracuda253 2 жыл бұрын

Dear Razor! If you still have a Spectrum DX5C w/SR6100AT please explain how to setup a failsafe. Thank you!

@rtoebak76 5 жыл бұрын

Hey buddy, just a quick question. This receiver 6000 can take a 2s lipo and has no problem with the servo's?

@Abagofweed420 5 жыл бұрын

I run mine with 2 and 3s

@NikkiNexo777 5 жыл бұрын

I also do Option 1. It's just quicker that way. Honestly, I'm too lazy to do option 2

@SpookNik4 3 жыл бұрын

Got this on C and D button so i dont have to go into the menu

@myersom11 5 жыл бұрын

Will the srs6000 work with a dx4c?

@thomaskuter6689 5 жыл бұрын

Very nice Didn’t notice the contra code Question I did everything you did except the code and it still disabled BUT the steering throw was less when I did that. When I turned avc back on the full steering came back. Have you checked to see if your travels the same with and without avc on?

@RazorRC 5 жыл бұрын

Yes, seems like it's the same. I think you have to set the steering travel before binding, probably doesn't work right if you set the travel after binding.

@benjaminkirchner7569 5 жыл бұрын

The travel hast to be a minimum of 80% befor binding.

@MaketoMake815 4 жыл бұрын

Ots not a code as stated in the video. It is for calibrating the transmitter and reciever.

@DR.ELEKTRIK 3 жыл бұрын

By doing this will the aux channels be functional?

@rtoebak76 5 жыл бұрын

So now we can buy the killer bee and turn off avc. Right?

@dvi-d6 3 ай бұрын

Hi there. Hopefully this message gets seen. So a strange thing happend. I turned on my kraton for first time in maybe 6 months. So Dx5c on, car on… now usually you have the common 5/6 beeps the car does before its ready to go. But now it does like 2 beeps then the fan slows down and its just idle. But check this… if i turn my steering full right lock it ramps up the fan again, the beeping resumes as normal and then its ready to go. It will actually drive (but only in full lock to the right😰) when i let go of the steering wheel the the fans slow down again and the car is idle. Any idea how to fix this bizarre problem?

@JeepinIvan_MTB 3 жыл бұрын

Can AVC be turned off if I still want my fail safe to work? Thanks

@TheEgb18c 3 жыл бұрын

What shocks are those

@AmpHibious 5 жыл бұрын

im trying this with my dx2e active tx. for my tenacity truggy and i just cannot get it to work.

@dungeonracer4288 5 жыл бұрын

Try again, I just did this with my DX2E and it disabled the receiver

@gabrielfournier2426 3 жыл бұрын

Wow, finally! Thanks a lot. Does somebody know how this avc system can be usefull ?

@DR.ELEKTRIK 3 жыл бұрын

If your doing a drag race and you want to go straight!

@kylebeaulieu9484 3 жыл бұрын

Is that receiver water proof

@nathanz602 5 жыл бұрын

Man radios are more expensive than I thought...

@swank1975 5 жыл бұрын

That is a low cost radio for the features it has. Some cost hundreds more.

@RazorRC 5 жыл бұрын

Nathan Zari the Flysky FS-GT5 has most of the features of this one for about $75-80 US. I think that’s a good choice for under $100 and it has AVC/SVC.

@nathanz602 5 жыл бұрын

@@RazorRC I have a Flysk FS-GT3B and I'm going to install it on my ARRMA senton. I like the Gt3b because the value, and I'm not a racer, so I don't need all the features and speed of a race radio or higher end radio.

@todaystopic8345 4 жыл бұрын

I bought mine from someone and it’s not in English. How do I change the language back to English

@todaystopic8345 4 жыл бұрын

😂 man I had to pause this video so many times and look at you remote in English up stand mine. I was able to bind it but I still don’t understand the language

@handleit 5 жыл бұрын

You kept the values at 0% after supposedly disabling AVC and yet you can still hear the servo making noise so I don't think your second method actually disabled it.

@RazorRC 5 жыл бұрын

The second way is what the manual says to do. The slow blinking light means AVC has been disabled, which is what you need in racing to prove it's off.

@topchoice32 4 жыл бұрын

But it keeps the car straight why turn it off

@RazorRC 4 жыл бұрын

topchoice32 AVC dulls the responsiveness of the steering. It also does weird things in the air when you jump because it doesn’t know you’re in the air and tries to autocorrect the steering. I prefer to be in control, not the computer.