Chrome caps would look sick

Color match the tow hooks on the duramax 😮‍💨🔥🔥

dudeee it will look sweet with chrome window trim and the little caps on the mirrors. keep up the good work man!

Get a filler primer and it’s easier to sand smooth then the texture. Looks amazing tho 🔥🔥

Man she looks good, chomper lookin' RIGHT.

Chomper looks it best with the flairs

Color matched flares is the move. Dropping the back would look good also in my opinion

I color matched my mirrors a year ago and the clear coat is peeling, Announcing to the world my lack of painting skills. Thanks for the tutorial on disassembling these guys; I will do it right this time. Chomper be lookn fiyah!

You should do a black grill and the lower Door guards black it would look silky clean

Exactly what I was going to tell you to get a palm sander! I'm hunting for a regular cab cateye z71, if you see one, hit me up, I'm in SE Ga, thanks!

I did the same on mine, but I only painted the mirror caps. Planning on doing the fender flares as well.

Awesome job dude! Those mirrors look amazing!

Looks great with out the flares.

Chrome caps would be 🔥

All it needs is some chrome mirror caps!

Had a 05 GMC. Just bought a Cateye. Love these trucks. 👍🔥

Looks clean man. Keep it up with the Chomper vids!

I've been watching the progress of your GMC Sierra for quite some time I gave you plenty of messages but I don't think you've got them or you didn't read them seeing that this video is new the probability of you reading it is higher so I have a 2001 GMC Sierra SLE extended cab two-wheel drive unfortunately it has the 5.3 l vortec V8 engine 285 horsepower stock. I have owned the truck for over 6 years seems to me that you have a lot better luck than I have with my truck. Within the past two years I have invested over $10,000 in vehicle in repair costs. The only real upgrades that weren't repairs was my flowmaster FX dual exhaust system which surprisingly crank my horsepower up to 294 HP in this truck cranks 285 stock. I replaced the driveshaft I had the whole thing rebuilt I replace the rear differential gear inside with a limited-slip rear differential new backing plate and bolts obviously new fluid. I replaced a hundred percent of the emergency brake system on the truck I gutted everything and replaced it hundred percent new. I also replaced rotors pads calipers front and back. I also bleed the brakes. I replaced sway bar links and bushings I replaced all four shocks I replaced all four wheel bearing hub assemblies I replaced the battery with a interstate battery because I've had great luck with these. I replace the serpentine belt the AC belt replace the tensioner pulley I replace the spark plugs spark plug wires I replaced 4 coil packs I replace the throttle position sensor the m a p sensor and I replaced all four oxygen sensors that was very expensive replacing the oxygen sensors. I replaced both power motors for the windows I had to replace the fan motor inside the truck the fan switch that controls the speed of the fan. I had to replacesome brake lines I had to replace a fuel lines and the fuel line going into the gas tank plus I have to redo the entire frame and that cost me $3,800 and then they tell me this after I've invested all this money 💰 into the truck. I quickly realized this shop was trying to scam me and sure enough that's exactly what they were trying to do to me. My truck has 123,000 mi and change on the odometer it sounds great it purrs in sounds absolutely fantastic with that dual exhaust system I put on. I also installed a k&n cold induction air intake system. And I've done more work to the truck but I just can't remember the rest of the stuff I have done what that was about 80% of the stuff I have done within the past 2 years it's been getting to the point where I'm ready to throw a frag grenade into the cab of the truck is getting to that point because I'm getting sick and tired of throwing money 🤑 at it. What is your suggestion if this was your truck and you were in my predicament what would you do????

Baby squat used to be my favorite on the channel......But Chomper 🤤🤤🤤🤤🤤🤤🤤

A high eching primer would definitely help when you do the fliers but you did a great job looks sick I've gotta do mine now

I see what you’re saying about the lines in the fenders. I did my flares in duplicolor truck bed liner and it turned out amazing. Just an idea for you.

Love your trucks dude.. especially Larry

Gotta go with chrome caps would look killer with the chrome handles

I would recommend hi build primer.

Looks great. I'm with you looks better with the flares.

if your power fold mirror is loose at the base, this is how you take it apart (on the truck if you want) and you can snug up the torx screws that hold the folding mirror motor at its base.

Pick up some spray max 2k clear coat,its got hardener mixed in and it actually provides a proper uniform gloss unlike the cheaper 1k clear coats. You can make it look like a spray gun was used

Passenger side looks awesome

You need chrome caps on the mirrors

Looks really good man!

I think the chrome caps are more of a must to do then the paint lol but definitely came out good either way

Get you a foam interface pad for your sander. Will work much better on the flares for sanding

Small details makes big difference

keeeeeeep the flares offfffff

Looking good!

Yoooooo😤🔥🤝🏾 truck looks too good man hey whered laryy👀

You should get a new grill for chomper to get rid of that chrome, I feel like it would look sick blacked out

Truck looks perfect but imo the stock grill looks way better. The all chrome grill with no gmc logo just looks odd to me

when are you doing the gear box. mine needs to be changed. need your guidance 😂

Needs chrome mirror cap’s would flow with the rest of the chrome

Should have used a primer or a sealer after sanding before the base coat. It would have smoothed it out more.

Do the subs not hit the back of the seats when they flex?

I just bought a 2002 Sierra S.L t with only Fifty five thousand miles on it 6 months ago completely Stock One owner vehicle garage kept No rust almost perfect condition inside and out What modifications would you suggest I do?

I’m a chrome guy so I would’ve color matched everything but the caps and got chrome caps

Rock lights on chomper and or all your trucks

cowl or ram air hood would be killer

Letssss gooooooo

Are you sure you put a heavy enough coat for your final coat. If you don't then it will show up orange peel even though you think it's from the plastic.

Need to add some more chrome to chomper

Color match the roof antenna

🔥 🔥🔥🤜🏼🤛🏼

GO ALL BLACK

Get some chrome mirror caps

Be much cheaper to buy from local paint shop ready to shoot paint. Actually get a gun and it would be good practice.

Trade me Chomper man lol I need a clean 4D truck

Get some more 24’s or 26 reps

Train horn next project

Did he get hacked? That’s looks like a scam channel replying to comments

Just do chrome caps instead of redoing them

Man quit lying to us you know that the cateye is your favorite 😂

Looks naked without the flares 😂

wrong, mirrors are textured which means you dont sand them!! alcohol solution w/ grey scotch bright pad....lightly sand...then adhesion promoter n paint dont chicken wrist while spaying, apply material on surface