did u solve this?

Why does everyone have bearing problems with the front wheel, never rear wheel. My ninebot made these grinding noises after 300 kilometers (around 185 miles) and now after 1700 kilometers it has completly broken

@@markoglibetic8617 The rear wheel bearings are covered by the motor but the front wheel bearings are exposed.

Its a big step up from the Xiaomi M365 & the M365 Pro ver as well.

I'm badly waiting for a max plus with front shocks and removable battery. Finally this good overall design will get right of this stumped bottom plastic cover.

@@pashko90 You'll be waiting a long time for removable battery, 90% of users don't need it and don't want it (compromises water resistance) as for front shocks, its easy enough to do this yourself if you want them.

@@pashko90 the battery is removable 6:51. Just not very easily- lol

@@pashko90 are you going to carry a 20lbs battery around to exchange when one runs out ? Otherwise it's unnecessary to have a removable battery, save for replacement when one goes bad but that is simple enough with the current setup.

Blossom bit? You mean security bit? Mine was a five point pentagon security bit to remove bottom cover

Решение нашёл при помощи фена. Греем кольцо до температуры пластичности пластмассы и аккуратно снимаем. Ставим также при помощи нагрева кольца феном.

Nodbot makes battery kits for the max. Even a 48 volt upgrade so you can go faster.

The Scooters were made in China.

This is the dust-free workshop, anti-static, dust clothing

It's generally referred to as a bunny suit, and most modern electronics manufacturers will require similar ppe

Maybe he doesn't want to get electrocuted. There is a lot of energy in the battery.

Tubeless tires.

if you put it under water...yes. but at normal conditions like rain...no.

There's a gasket around the wires to help prevent water entry. (Pay attention to 5:13 to the black rubber part once they pull the motor cables) Like the guy said above me, it's not meant to be submerged, only to survive large water splashes, like rain and puddles.

nevermind the display my bad, but the bluetooth icon on the scooter does not flash to activate the scooter....Tee "reboot" does not solve the issue.

Why not just remove the covers and check for yourself? takes 2 minutes :P

They can also loosen!!

@@Bushcrawler might be suffering from Segway induced trauma. These things are touted as either complete and utter dog shit to back to the future and beyond machine's! What seems like an ordinary task in one realm( cars) completely blows ones mind in Segway e-scooter world. I'm now proficient in: ☑️Control Board Diagnostics. ☑️Firmware script kiddie hacking. ☑️Quality &Control Board Certified. ☑️ DIY Customer Service ☑️ Error Codes'and debugging. Basically we humans simply wanted scooters not another skill set!🦉

I‘ve got the same issue, it comes from the upper portion of the stem. I can hear a metal sound when I pull on the brake cable and push it back in. I couldn’t see what it might be in this video though. The part, where the cable gets removed from the stem is missing.

Fatih K. The tyres Defy logic! you need a Thermic lance to remove these tyres!

Video shows T20 hex key.

A friend of mine used "Security Torx T15" in his Ninebot G30 Max. Has to be "Security" type for the central hole in the tip to match the central pin in the screw.

Error 14 is a brake lever, error 15 is accelerator error. I think what your BLE board is defective. If you in LA I might be able to help you out. 5624999091

8 months and no one upvoted this. Where's the ring spanner or at least slot ones.

I have! I went to a bike shop and they removed them for me and put new, better ones on. You can also remove the stock clunky bell and replace it with a better one, It looks so much sleeker and stealthy, I love it

Where I can buy a batery of Segway Ninibot KickScooter MAX

Same way as on 365, but since a tire wall is bigger, it's gonna be easier to replace a tire.

Back wheel is the motor.

Assembly is just disassembly but reversed.

I'll do them on mine instead! 😂

No heat gun for obvious reasons... the huge battery inside is flammable and glued directly onto the metal.