Рет қаралды 7,509
Hi, guys. This is Block Luban. And I’m Norman. So have you ever felt worried about the power consumption and the noise made by your machine? Today is your lucky day. I’m going to introduce to you a brand new technology, that is called immersion cooling system. What is it? It uses oil and water circulation to diminish the power consumption and the noise. And it rapidly increases the hashrate of your machine.(3Alright today I’m going to use this Antminer T17+ as an example. As you can see, there are four fans attached on both sides. And all you have to do is to use this electrical screw diver to remove all the screws. So let’s do it! et’s remove the upper part of the machine. And we need to unplug those cables because they are connected with these fans. These fans will be disassembled. And this side are disassembled either. Right now we finished disassembling this machine.Okay let’s see how it works. Got it?Well, what are these? These are analog accelerators. The purpose of using this is to make the machine feel the existence of the earlier fans. Let’s put it back.This little monster is all set up. Let’s put this into this tank and give him a free bath.As you can see this is very important. It’s called electromagnetic valve. And this is input port. This is output port.Well inside the tank as you can see, there is a lot of space for you to put the machine in there. This is the Ethernet cable. And this is power supply connectors. (blue part减掉,留下blue pipes) And these blue pipes are the part where the water will flow. Here are two fans. That’s pretty much everything inside the tank. I will tell you later how it works.Ok now. Let’s put this machine into this tank.Here we go. The power connector goes right here. One side and the other side. And the Ethernet cable goes right here.Alright it’s all settled up. Now let’s pour the dielectric oil into the tank.Now let’s put the dielectric oil into the tank.Now we need to connect the water pipes to transfer the cooling water into the tank. It’s done.Now we need to connect this power supply connector. And the Ethernet cable.Everything is finished. Now we will see in two days about the statistics of the performance of the machine.That’s pretty much everything about this machine. And if you like this machine, please comment below and let me know. See you next time bye bye.