That would be fantastic. Just bought one with a mate and we are real amateurs starting out (retired and wanting to fish) Don’t know what to look for.

@@russellgascoigne2591 Stay tuned. We are woking on one and should have a video up soon. You got a great Garmin and I am sure you will be very pleased with your purchase. It has tons of features and the more you play with it the easier it is to use.

Yes please. Just got a Garmin ecomap UHD 73cv ice bundle in on Wednesday

@@bJH3105 That Garmin bundle should be great for your ice fishing. Stay tuned for an upcoming video on set up and stay warm out there!

@@AquaLifestyle thanks got it on a dock right now definitely different than my vexliar Fl-18

Glad you are having success catching fish. What are catching?

Glad you enjoyed the video and got value out of it

Glad you enjoyed the video. Make sure to subscribe to the channel. We have a lot of videos planned for the year. If there is something specific you would like to see let us know.

Glad you enjoyed the video. We hope you check out some of the other videos within the channel.

Glad you got value from the video

We are glad it helped. A unit with a worldwide base map would be the better option in your situation for use in Philippine waters. Then add a chart card for the location you boat in. You can see your options on the Garmin website. maps.garmin.com/en-US/marine?key=wdq9709ju602

We are glad you enjoyed it and found it useful. Thanks.

Is the sim card needed to use autopilot? I can't seem to get to the engage autopilot screen.

Glad we could help. Many thanks.

Thanks for watching.

From Garmin's Instructions: Setting the Keel Offset You can enter a keel offset to compensate the water depth reading for the transducer installation location. This allows you to view the depth of the water below the keel or the true depth of the water, depending on your needs. If you want to know the water depth below the keel or the lowest point of your boat and the transducer is installed at the water line or anywhere above the end of the keel, measure the distance from the transducer location to the keel of the boat. If you want to know the true water depth and the transducer is installed below the water line, measure the distance from the bottom of the transducer up to the water line. NOTE: This option is only available when you have valid depth data. Measure the distance: If the transducer is installed at the water line Callout number one or anywhere above the end of the keel, measure the distance from the transducer location to the keel of the boat. Enter this value as a positive number. If the transducer is installed at the bottom of the keel Callout number two and you want to know the true depth of the water, measure the distance from the transducer to the water line. Enter this value in as a negative number. Keel offset drawing with callouts Complete an action: If the transducer is connected to the chartplotter or a sonar module, select Settings > My Vessel > Keel Offset. If the transducer is connected to the NMEA 2000® network, select Settings > Communications > NMEA 2000 Setup > Device List, select the transducer, and select Review > Keel Offset. Select Plus symbol if the transducer is installed at the water line, or select Minus symbol if the transducer is installed at the bottom of the keel.

You should be able to via Garmin's Active Captain App.

You can enter GPS coordinates as well as Loran TD's as waypoints with this chart plotter.

Your not doing anything wrong, you just don't have that feature turned on. First get on the chart screen. Then click the menu. Look for the Layers tab and click it. Then look for user data and click it. You will see an option for waypoint display. Make sure you click it and a little green bar will appear on the tab. Your waypoints will now show on the chart.

Thanks. I will try it tomorrow.

As long as you can power the unit up you can create waypoints and routes. You can also do them on your smart device using the Active Captain app. Stay tuned for a video on that.

Aqua Lifestyle Is there a special cable I can buy to boot it up inside my house?

You can enjoy auto guidance capability buy adding a G3 Vision chart card for your area.

You need to go to the Home screen then Settings and look for the simulator option and turn it off there. It may have a different software version that only shows a demo mode. If so turn that to off. Still unable to? then call 1-800-800-1020 when in front of the unit and a Garmin tech can walk you through it.

It seems something is changed in your settings. if you are in the US try calling the tech line when you are in front of the unit and they can walk you through resetting it. The number is 800 800 1020.

Because they do not offer an AC adapter you will need to use the power cord (make sure you have it fused and connect it to a 12 volt battery.

Absolutely. You want to make sure you have the right charts loaded to get maximum detail. You can always pull coordinates for the route from paper charts as well.

You can use a trail to follow your path back to where you started. To activate tracks do the following: From a chart, select MENU > Layers > User Data > Tracks. Select the tracks to display. A trailing line on the chart indicates your track.

Glad you were able to find something that works for you.