Discover The Secret To Perfecting Base Cabinet Construction!
Рет қаралды 20,284
2 ай бұрынBuilding a frameless base cabinet has never been easier . Sedge steps you through the process to get you started.This video has been a long time coming, enjoy !!
I hope this helps!
Be positive and stay sharp...WICKED sharp !!!
#cabinetmaking #woodworking #kitchendesign
Sides = 2@768 x 600
Bottom = 1@732 x 600
Nailers = 4@732 x100
Referenced Videos:
Upper Cabinet Build | • How To Build A Wicked ...
Ripping Plywood | • The Best Way to Proper...
Setting Up FS Parallel Guides | • Parallel Guide Overvie...
Cross-Cuts | • Perfect 90: Understand...
Edge Banding | • Cabinetry Basics: Edge...
LR 32 System | • How Do I Set Up the Fe...
Final Assembly | • Cabinet Build: Final A...
Toe Kick Build | • Cabinet Build: How To ...
Shelf Video | • Building a Cabinet Shelf
Tools used :
Domino : amzn.to/3QAixDe
MFT/3 : amzn.to/3WxWK2F
Conturo Edge bander : amzn.to/3QFsEqj
TS60 Tracksaw : amzn.to/3UP1Fel
OF1400 Router : amzn.to/3woRzYq
LR32 Line Boring Jig : amzn.to/4acG8AI
TID18 Impact Driver : amzn.to/4aaHITJ
TSO Bigfoot : tsoproducts.com/jigs-fixtures...
Quickscrews : bit.ly/3xQWvlQ
Affiliate for :
TSO Products : tsoproducts.com/?ref=cwmk4ofe
Kaizen Source : www.avantlink.com/click.php?t...
Taylor ToolWorks : lddy.no/1eoy5
Forged 3D : forg3d.store/sedgetools
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Chris’s AV Gear:
Panasonic 4K Ultra HD : amzn.to/3pXXPzX
Rode Video Mic GO : amzn.to/3vXOJqx
Rode Wireless Go 2 Mic : amzn.to/45aodZt
Sony MDR7506 Headphones : amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card : amzn.to/3i0iT4u
Follow Us on the social media platforms :
Website: www.sedgetool.com/
--------
Instagram: sedgetool?...
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com/@sedgetool?lan...
_ _ _ _ _ _ _ _ _
Green Suiters Podcast: podcasts.apple.com/us/podcast...
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Chris "cameraman" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.
#festoolemployee
@user-yh9ms3kc5m 2 ай бұрын
Thanks for the video Sedge. I appreciate how you went into the dimensions as they provide a good start in learning cabinet building.
@sedgetool 2 ай бұрын
Glad it was helpful!
@brading84 10 күн бұрын
Great video sedge! Been waiting for this one for awhile! Thank you!
@sedgetool 9 күн бұрын
u bet
@karenkrone6156 2 ай бұрын
Thanks for all your great videos. So helpful.
@sedgetool 2 ай бұрын
You are so welcome!
@milandjordjevic5949 2 ай бұрын
Great Video Sedge . Thanks and Thumbs up .
@sedgetool 2 ай бұрын
Thanks 👍
@jean-baptistedijon 2 ай бұрын
Great tutorial as usual. Thank you for sharing your knowledge ❤
@sedgetool 2 ай бұрын
You are so welcome!
@barriowoodworks 2 ай бұрын
Excellent tutorial .
@sedgetool 2 ай бұрын
Many thanks!
@engineerMike2999 2 ай бұрын
Excellent content and instructions , thanks for sharing this type of information
@sedgetool 2 ай бұрын
Wicked cool ...Many thanks !!!
@engineerMike2999 2 ай бұрын
Question: I noticed that your screws were drilled below the surface of the plywood opposed to being flushed, any issues with the screws being countersunk?
@AngieWilliamsDesigns 2 ай бұрын
Great video.
@sedgetool 2 ай бұрын
Glad you enjoyed it
@geoffkelly2760 3 күн бұрын
Thank you from Downunder
@sedgetool 3 күн бұрын
Cheers
@ColinCavaliere 2 күн бұрын
@@sedgetool Awesome video! what edge banding did you use here?
@timothywozniak6952 2 ай бұрын
Comprehensive tutorial. Like others, I use a 1/2-inch back. Useful for double bases to anchor ‘mid-back’ shelf supports.
@sedgetool 2 ай бұрын
cool !!
@stevealbums7897 2 ай бұрын
Hi Sedge, another great video Steve
@sedgetool 2 ай бұрын
Glad you enjoyed it
@stevealbums7897 2 ай бұрын
@@sedgetool Hi Sedge your videos are always enjoyable! I am based in Leeds UK so by and large the principals of cabinet making are the same Steve
@warrensmith2902 2 ай бұрын
Well done as usual. One suggestion, mark, mark, mark, and double check your marks and grain direction before you start your batches (Don't ask me how i know that 🤪). I use gauge blocks instead of the Festool parallel edge stops, to set up my offsets for my groves, to align my LR32 rail for punching my 5mm holes or the grove on the back. You might have missed using various domino combinations as gauge blocks for routers depth settings. Love that trick.
@sedgetool 2 ай бұрын
Good tip!
@TheLastPharm 2 ай бұрын
Really good tip!
@mbrain03 2 ай бұрын
Thank you Sledge for sharing your knowledge with us. What are your thoughts on leveling legs or feet vs the 4 inch kick plates that the cabinet will sit on?
@sedgetool 2 ай бұрын
kzfaq.info/get/bejne/fciIoch-npbIZ5c.html
@irakopilow9223 2 ай бұрын
Great video covering not only all aspects of the build, but the reasoning behind the method. I cannot say that anything new was covered here per se, but you have integrated the 32mm system into the cabinet's DNA. The only thing you didn't address is fasteners on the exposed side of the base. I assume finish nais would come into play in lieu of the screws. Thanks Sedge. Wicked pissah!
@sedgetool 2 ай бұрын
Thanks.....I have a video for finishing an end cabinet..... Hope this helps !!! kzfaq.info/get/bejne/f6dyksyixtXJp2Q.html
@wrtlprmpft2 2 ай бұрын
Of all the best videos of your channel, this is the best!
@sedgetool 2 ай бұрын
Wow, thanks!
@flyawaytx4588 Ай бұрын
I love that shirt!
@sedgetool Ай бұрын
me too
@Jaypark1113 Ай бұрын
Best base cabinet build tutorial. Thank you, Sedge.
@sedgetool Ай бұрын
Wow, thanks!
@smorgasbord42 2 ай бұрын
On Tight/Loose settings for the dominos - completely agree you want Tight-Tight for the fronts. But for the middle and rears I prefer to have Tight for one side (typically edge) and Loose for the other (typically face), not Loose-Loose. With Loose-Loose the domino can get cockeyed in the mortises.
@sedgetool 2 ай бұрын
Good point !!!
@jeremyjedynak 2 ай бұрын
Nice that this cabinet was built to the Blum System 32 standard. It would be good to see more videos about the benefits of System 32, as there seem to be very few out there.
@sedgetool 2 ай бұрын
working on it !!!
@jeremyjedynak 2 ай бұрын
Looking forward to seeing them!
@dylanzemek7069 2 ай бұрын
Great video sedge, thanks for doing the base cabinet! Do you have to do anything different if you are going drawers instead of doors?
@sedgetool 2 ай бұрын
Yes .. I would make the cabinet narrower ...or.....depending on the width of your drawers !!!
@sqlsmarty4325 Ай бұрын
Awesome instructional video! Thanks 😎👍
@sedgetool Ай бұрын
Glad it was helpful!
@chapius1 2 ай бұрын
Great vid Sedge, really clicked for me. One quick question. This is just a small thing, but wouldn’t it be more efficient to edge band the full length of plywood prior to cross-cutting to individual components?
@sedgetool 2 ай бұрын
I stay away with this method because some of those lengths will not be used and it seems a waste.... I have always cut to length and then banded......
@ethan3x8 2 ай бұрын
Thanks for the great video! I might have missed it, but did you end using glue with the dominoes or just left it at dry fitting and then using screws.
@sedgetool 2 ай бұрын
I do Not... i will take it apart and spray a finish... lays down better...Glue does not stick to finish..... I have never had a failure
@williamstead6354 2 ай бұрын
Off topic question: about a year ago, you did two very helpful videos about the Shaper Origin, and I had the impression there were more on the way... is that the case?
@sedgetool 2 ай бұрын
Yes, absolutely !!!!!!!!!
@leemarzahl8891 Ай бұрын
Great build video!
@sedgetool Ай бұрын
Glad you enjoyed it
@domenicbarone3215 2 ай бұрын
Sorry! ....But you should have " Pre-Drill " before screwing ( on 29:40 sec )....The plywood split without addressing the mistake!.....Cheers
@sedgetool 2 ай бұрын
ok
@timothywozniak6952 2 ай бұрын
Down the road from you in Brownsburg. Envious of your shop, especially the Systainer wall. What are the dimensions of your shop?
@sedgetool 2 ай бұрын
The dimensions are a typical 3 saw garage !!!
@timothywozniak6952 2 ай бұрын
What are you using to trim the edge banding?
@sedgetool 2 ай бұрын
Festool MFK700
@troypast3589 8 күн бұрын
Noticed you did not pilot those screws first, would that have helped reduce some split wood? Also how does one easily get metric festool in USA?
@sedgetool 7 күн бұрын
a lot of Festool accessories are offered in both ... my tools are just older...
@troypast3589 6 күн бұрын
@@sedgetool as a new woodworker it looked like I needed metric tools to work in metric, but the more I watch these videos it seems the majority of what I’ll be doing can be addressed by measuring at the bit or blade. Thanks for all the videos, I have learned a ton.
@leslievasquez136 2 ай бұрын
Very helpful video. Do you glue the dominos into the cabinet?
@sedgetool 2 ай бұрын
I do Not... i will take it apart and spray a finish... lays down better...Glue does not stick to finish..... I have never had a failure
@jhutch9106 Ай бұрын
If you added a drawer to the cabinet would you add a spreader between the door and drawer, and if you did would you add it on an increment of 32.
@sedgetool Ай бұрын
I would add a spreader and not punch holes all the way !!!
@desager1 15 күн бұрын
No glue?
@sedgetool 14 күн бұрын
nope .... you can if you want...I just never do and have never had a failure .... I can always take apart and modify as well...
@user-bd2xu8fh9t 2 ай бұрын
No glue with the dominos?
@sedgetool 2 ай бұрын
I do Not... I will take it apart and spray a finish... lays down better...Glue does not stick to finish..... I have never had a failure
@julianniemeyer1655 2 ай бұрын
You put the base between the sides, and mention sheer forces on the dominoes. If we look at the Festool plans and photos for a DiY Sysport they put sides on top of the base which then has no sheer forces on the dominoes. Who's correct and why?
@sedgetool 2 ай бұрын
I have always seen and have been taught to place the tops and bottoms between the sides of cabinets...I have often wondered why the plans that come with the Sys AZ drawers have that orientation. I believe it is to attach casters..That is the only thing I can think of.
@richeygoldberg8549 2 ай бұрын
@@sedgetool I don't think one way is really that much stronger than the other. I think it's more about how it looks.
@apswirl Ай бұрын
I’m learning how to build my very first cabinet. I’m wondering why you need dominos AND screws? I thought dominos were used in place of screws. Isn’t this overdoing it?
@sedgetool Ай бұрын
I use the domino for front edge alignment and also for easy assembly
@KiwiSkipper 11 күн бұрын
Mate .. How many hundred thousands of $$ of Festool gear to you have?? Every tool in their book by the looks 😳
@sedgetool 9 күн бұрын
a lot......
@troypast3589 8 күн бұрын
just looking at the tracks he uses as wall art / hangers broke my budget =)
@zephyr1408 2 ай бұрын
As a custom cabinet maker who works with two huge purveyors of all stone I totally disagree! I make the cabinets and dado or rabbiting in the back is unnecessary; completely ! My stone supplier templates and uses 5/8” Ply on top and not once is 15 yrs has anyone called back and stated their counter tops or cabinets failed because it can not breathe? These are systems somewhere along the line became incorporated into the box making portions of cabinets ! Why? It’s not for strength ! I never use any 1/4” material! It’s all 3/4” boxes and 1/2” backs sometimes dominoes are used if I think I need them for racking strength and I reinforce my cope & stick / stub tenon doors with #4 or 5 domino ? Drawers are sometimes subbed out sometimes not? Breathing has nothing to do with a stone top! Support yes! Oxygen? No! All sounds great just not Cabinet-ly correct !
@sedgetool 2 ай бұрын
Good For You !
@cmclewee9518 2 ай бұрын
Why do you put in removable backs. Unless it's a sink unit it's a waste of effort, just put an 18mm thick back and dowel it it will make a much stronger and robust unit that does not require grooves to be cut. In Europe all our commercial units are CNC cut with all the dowel holes predrilled. The cost of plywood here would make units far more expensive than double faced chipboard or MDF. Which only requires edgebanding to finish it.
@sedgetool 2 ай бұрын
ok
@robertwalker5676 Ай бұрын
It's a base unit not a piece of art furniture. Removable back panel. Not a chance with worktop fitted. Over engineered by a pedantic and expensive tool expert.
@bartholomewgreatpants3425 8 күн бұрын
Boy you guys are assholes huh? Who the hell raised you guys? This is some real fatherless behavior.
@willkirk486 Ай бұрын
Watching is interesting, but you’ve got tool sets that are so far out of reach for most intermediate woodworkers that the practicality factor is zero. I’m sure your market is the highest end hobbyist. Thanks anyway.
@sedgetool Ай бұрын
Thanks for sharing
@dfrechettej3v 2 ай бұрын
No glue?
@sedgetool 2 ай бұрын
nope
@troypast3589 8 күн бұрын
@@sedgetool Might as well not use it, likely states are going to ban it anyway... =)
Bourbon Moth Woodworking
Рет қаралды 260 М.