Reconditioning of Engine Block and Complete Procedure of Boring and Honing Engine Block

Рет қаралды 1,790,001

Жыл бұрын

Reconditioning of Engine Block and Complete Procedure of Boring and Honing Engine Block
#blockhoning #blockboring #machineshop #cuttingedge #machinist #pakistanitruck #amazingtechnology
03004086077
03074746508

Пікірлер: 1 300

@markwallace5274 Жыл бұрын

Personally as a engine builder I could point out a million things that drive me crazy watching these videos !! But I’m so impressed with the work these guys do with the very limited resources!!! Very entertaining to watch

@SirUncleCid Жыл бұрын

One man's poverty is another man's entertainment

@ViniciusNegrao_ Жыл бұрын

You know, as a gearhead I doubted the engine would even run until the end, but I think they did a decent job. I wouldn't count on the durability of that block anymore though. They'll have to do that more and more often with each cycle

@grayjack5021 Жыл бұрын

A man told one time you want it to run or look good.

@JobNowHCN Жыл бұрын

Totally agreed!

@retromusic-le9hm Жыл бұрын

kzfaq.info/get/bejne/bNiggc5yqJm4g5s.html

@felipecel Жыл бұрын

I work in a official caterpillar dealer, we rebuild engines with all technology and tools to make an perfect service. It's so perfect that caterpillar gives another serial number to the machine as an brand new engine. I'm impressed what these folks can do with so improvised and simple things. It's satisfying to see the pre heat process.

@the_chomper Жыл бұрын

no you dont

@felipecel Жыл бұрын

@@the_chomper what?

@dnor16 Жыл бұрын

@@felipecel, What kind of answer were you waiting for? these people celebrate mediocrity

@odairborba7258 Жыл бұрын

Pura gambiarra

@hughjanus2465 Жыл бұрын

yeah and it takes only 50 people to do one block

@imbe. 11 ай бұрын

All i can see is skilled crafts men working with what they have. At first i was doupting how much this is in spec but with the use of inserts and piston cover as template in improvised free hand machining was incredible to watch come together.

@donniev8181 8 ай бұрын

The guy accidentally drilled thru the cylinder wall, that piston will never seat right again.

@porcupinepunch6893 6 ай бұрын

@@donniev8181didn't you watch him bore it?

@frosthoe Жыл бұрын

Retired machinist here. For years i had people tell me you cant reliably weld a casting....only braze. then you watch guys who dont listen, filling holes and welding cracks in a lasting way. the preheating and low oxygen - carbon charcoal environment seem like a GREAT idea. 8:32 This guy knows what works and what doesn't. He'd make $$$ bank fixing old tractors in the American midwest!

@Happy357mag Жыл бұрын

Brazing is a good reliable and repeatable repair for cast iron. You being a retired machinist, would you risk a customer's engine block or piece of machinery on a repair like this, that has a 30% failure rate or with brazing that has a1% failure rate? Keep in mind you have to warranty your work. ☆Disclaimer☆ I don't know the exact % of failure, just a educated guess for my question.

@yamahajapan5351 Жыл бұрын

There are no legitimate welding shops that would even bother doing a repair including brazing on stuff like this. Most welders can’t gas weld cast iron anyway.

@yamahajapan5351 Жыл бұрын

@@Happy357mag brazing in this situation wouldn’t make sense. Brazing has its place, but this ain’t it. If this repair could have been done with brazing, don’t you think these guys would be brazing it???? Think about it..

@frosthoe Жыл бұрын

@@yamahajapan5351 Not true, heavy equipment shops do cast repair all the time, its just done as spray weld. this hand filling is just neat though, in a BBQ! kzfaq.info/get/bejne/sM2mbMpyvdnXl4E.html

@tomthompson7400 Жыл бұрын

I would love to know what that rods made from all the same ,,,,

@TheChipburner Жыл бұрын

В ремонте блока принял участие весь город

@ArtemAleksashkin Жыл бұрын

в индии много людей - это не проблема

@user-nb2qr5dx5w Жыл бұрын

@@ArtemAleksashkin это пакистан

@porhporhev493 Жыл бұрын

Это Пакистан и они наши враги.

@htopor36 Жыл бұрын

@@user-nb2qr5dx5w тот же хер, только в другой руке

@alexodinodin990 Жыл бұрын

@@ArtemAleksashkin Интересно сколько стоила вся работа? Кто знает напишите

@ReservedForFutureUse Жыл бұрын

"Are you sure you got the block completely cleaned out?" - "Sure, I brushed the mud off it with a handful of straw, then squirted some random oil on it from a Mountain Dew bottle, and the wiped it a few times with a dirty rag." - "Perfect."

@kode4420 Жыл бұрын

"That's how my daddy did it and his truck is still running".

@olavofavoreto Жыл бұрын

Antes de montar o motor as pessoas são lavadas e assoprando para retirar os resíduos

@bairfamilyfarm1336 Жыл бұрын

Just shows you how picky modern engines are. Old fords could run forever on oil changes where the new oil is the dirty oil from a tractor's oil change. And old chevy engines could go 50 miles with no oil, then run with no problems after oil get put in.

@stan9737 Жыл бұрын

They conveniently left out the part where they show it running. It probably exploded on the first start.

@nawzy202 Жыл бұрын

They remanufactured a block with a mountain dew and a dirty rag let's see you do it

@grezza112 10 ай бұрын

When I saw the hand grinding of the cylinders and head I was worried but once you actually sleeved it and decked the head properly I changed my mind. Amazing work and just goes to show how so many things can be repaired that in most places are just replaced.

@monstereng43 7 ай бұрын

everything can be fixed and repaired the problem is, is it worth it. for some brands parts alone will be well over the cost of just buying a brand new item. That's the problem.

@user-wm3fc1sk1p 5 ай бұрын

@@monstereng43 Yes, everything is fixable. The problem is that here in the United States labor is NOT cheap. For someone to do this kind of work they would charge soo much money that you could pretty much pay dealer price for the part you need at that point. Everything here is crazy expensive. Can't even have your entire car reupholstered without paying an arm and a leg. A quality paintjob that will last starts off at 4-5k, basically more than some of this older cars that need a paintjob are actually worth. Additionally that 4-5k you sink into the car is not even an investment at all. Just because its flawlessly painted people are not going to pay you the price of the vehicle plus what you paid to paint it... Not long ago I bought a 99 mitsubishi eclipse GSX with plans to restore, needed interior/exterior work and engine work but I can handle engine work on my own, also had a bit of rust. When I started adding all the numbers It was actually smarter to just buy a mint one from bring a trailer, literally paid a fraction and now I have something that is actually worth something, all mint flagless original paint, no rust, low miles. This was before covid when all these older iconic cars skyrocketed in price so it was actually a solid investment on my end...

@nikolaypak6649 Жыл бұрын

На седьмой минуте я думал им надоело всё и они решили мангал из движка сделать😀

@sergius0202 Жыл бұрын

После того как этот чудик разхерачил цилиндры он только для мангала и годится)

@andreyfrolov1532 10 ай бұрын

Тоже так подумал😅

@serglud6620 9 ай бұрын

автоваз по сравнению с ними это передовые технологии

@user-dx9yn4ey2c 7 ай бұрын

с голодухи еще и не то сделаешь

@OSA-78 Жыл бұрын

Блок с "идеальной" геометрией получился)

@FOMO-hv9jy Жыл бұрын

очень понравился момент с подготовкой к расточке цилиндров, да вообще все по технологии и главное с идеальными размерами. показать бы им микрометр

@FOMO-hv9jy Жыл бұрын

я еще рекомендую посмотреть как они коленвал переваривали:) там вообще песня)))

@OSA-78 Жыл бұрын

@@FOMO-hv9jy ))))))), я видел))))👍 Там после болгарки всё в идеале)))

@danv5075 Жыл бұрын

Да похер. Мотор 70-ти летней давности, не наддувный, там допуски +/- пол лаптя. Всё будет работать.

@user-hf7lu3nr5h Жыл бұрын

Для их страны и так пойдёт

@anti-trader7751 Жыл бұрын

Я так понял что оказывается для ремонта блока необходимы: дрова, мангал, болгарка, дрель, баклашка с водой и длинная палка для переноски, а и молоток...))))

@piter2010ism Жыл бұрын

Не.Ещё пару чурок забыл в комплект.Без них не получится.

@user-wl3ff8py9g Жыл бұрын

Два ведра земли с дороги забыл

@qwas4728 Жыл бұрын

Загнутый электрод ( но его тут нет)

@user-xw7bn7rq3t Жыл бұрын

Ещё нужно: Расписная тарантайка для перемещения, дед-колдун с шайтан-паяльником, дядя с сигаретой для расколупалки, молодой расколупальщик с большим вращающимся булыжником, и три раза огромный фрезер

@user-cl9ew9jr2g 5 ай бұрын

без гашиша там ничего не делается

@user-ns8jn6tw5g Жыл бұрын

Ну гильзовка меня особенно впечатлила 🤣, всё как надо, на горячую, с натягом 👍🤣🤣🤣🤣🤣

@user-fi7fy4cg4x Жыл бұрын

😊 Да нормально , башкой прижмется !

@dozar4387 Жыл бұрын

Как у паренька еще пальцы целые при такой гильзовке

@fjgdlud8030 Жыл бұрын

Всë тютелька в тютельку! Миллионники собирают на коленке! Маск нервно курит в сторонке!

@user-rc9nt7zv4m Жыл бұрын

Братья Богдановы увидят, их кондратий хватит 😂.

@user-jn1rv1lq1b 8 ай бұрын

БОГДАНОВЫМ ДО ВЫСОТ ЭТИХ МАСТЕРОВ ЕЩЕ РАСТИ И РАСТИ@@user-rc9nt7zv4m

@CPhilliPS30 Жыл бұрын

People in the Middle East and South Asia are some of the most incredible resourceful people in the world. Thanks for sharing!

@user-ou3jq4jo5s Жыл бұрын

Эти ребята ,знают толк в экономии, на коленке сделают все что угодно, хоть вертолет, хоть самолет, хоть подводную лодку

@user-ns8jn6tw5g Жыл бұрын

Ну оно так на самом деле, остаётся только удивляться

@user-nb2qr5dx5w Жыл бұрын

Вря тли они сделают вертолет и тому подобная техника, а вот телегу с движком от японцев или немец это да

@Bolotov7 Жыл бұрын

Они только из чужого хлама могут такой же хлам сделать, пару дней поработает и то хорошо...

@HAMMER13 Жыл бұрын

Это не экономия друг. Вся эта работа займет больше половины цены этого блока, они ремонтируют их из-за того что нет производства или доставки в их регион.

@Bolotov7 Жыл бұрын

@@HAMMER13 экономия была бы, если он любой другой ДВС быстро закинул в свой трак и поехал зарабатывать деньги, а тут неделю из хлама делают новый хлам, которы скорее всего день поработает и умрёт опять...и опять простой,опять безполезный ремонт и так по замкнутому кругу...Эти люди просто не знают, что лучше один раз потерять, и потом много получить, будут терять и терять пытаясь из говна и палок что-то слепить... Да и опытный разумный человек просто увидев такой ремонт хоть раз сразу поймёт, что хорошо эти ребята не сделают, а сделают тяп-ляп лишь бы крутилось, и так сойдёт!)

@JAKEWJONES Жыл бұрын

In my 49 years of building cars and rebuilding engines, I never once use charcoal and lighter fluid.

@davidparker9676 Жыл бұрын

I weld on cast iron every now and then, it's very important to get the cast iron hot and keep it from cooling too quickly after welding. I usually have a metal bucket of sand and a fire blanket to prevent the part from cooling too quickly and cracking. I understand what they are doing here but I seriously doubt that it would be very strong. I guess if all you want is to buy a little more time on an engine past borrowed time, this is one way to do it.

@BobbyBasketballl Жыл бұрын

Coal is the best media for working on steel.

@daviddelgado556 11 ай бұрын

Because you don’t live in Pakistan

@ilhamr8975 11 ай бұрын

ofc because you dont have enough experience in casting metal because when you melt the iron very important to get melted iron not very fast cooling because it will make the end product crack now you understand why they use carcoal?

@rcdogmanduh4440 10 ай бұрын

Learn something new everyday!

@Hengst. Жыл бұрын

Там на второй минуте работник очки защитные одел!!!! Что за беспредел устроили! Дайте людям спокойно работать без ваших техник безопасности и не стой перед ведром с расплавленным алюминием!!! ("сарказм") А не все нормально, на третьей там уже другой в отверстие дунул через трубочку) Они по уровню блок в землю закапали - я валяюсь... Дед с горелкой топ конечно, не первый раз его вижу

@user-yh6dr9jn4x Жыл бұрын

Это дичь ни когда не закончится 🤣

@user-pd8fr8ii9u Жыл бұрын

Ну русские конечно всех обосрали, они же всё лучше умеют, научились у других...а хотя о чем это я, мы же ничего не умеем, копируем у немцов, японцев, американцев

@glorhi Жыл бұрын

Орочьи технологии топ!

@user-pl2iy4cl6v Жыл бұрын

И хонинковгание 50/50: брусками и шкуркой)

@glorhi Жыл бұрын

@@user-pl2iy4cl6v Хонингование ок, смущает то что я нигде не видел ни одного штангециркуля за все видео) ходос авто наверняка уже в шоке)

@markshort9098 Жыл бұрын

Nice repair, it's a lost art here but this repair was done exactly as my father taught me to do it when I was a kid

@WilmerCook 11 ай бұрын

Yes that's when a mechanic repaired engines, I was taught that when I was a kid. They would laugh at part changers, they weren't mechanics.

@kashubelua Ай бұрын

Chances are soon we'll get back to that...

@Joker21SRB777 Жыл бұрын

If this were a shop in my country, everyone would meddle into everyones work

@iknowyourebrokeauto468 Жыл бұрын

If this was a shop in my country, they would be out of business with no customers

@mr_mnky Жыл бұрын

this was just fucking incredible. Taking a sledgehammer to those cylinder sleeves while his assistant held the plate & had his fingers inches away from being completely destroyed was the chef's kiss...

@georgecavanaugh8757 10 ай бұрын

I love these videos. Look at all the old master craftsmen passing down their skills to these young men and boys. This is precisely what the U.S. industrial workshops looked like until we regulated ourselves into obscurity. Mark my words, they will become titans in industry the way the U.S. used to be. They have the old machinery, the know how, and the regulation free labor that breeds competitive incentive. We were the captains of industry, and now it’s these folks. Congratulations, you’re well on your way to the top. We’re dumb enough to think we can just buy and sell success. Not so.

@d.c.4285 7 ай бұрын

Titans of industry? I doubt it. Looks like they did a lot of unnecessary work to repair damaged threads.

@horacecomegna335 4 ай бұрын

@@d.c.4285Helicoils maybe?

@kltpep Жыл бұрын

Super impressed on what you did with this engine block. Much respect to all the hands that touched this.

@genkidama7385 Жыл бұрын

i really like the fact that people in the streets are doing diy high tech, and saving tons of money. here in europe, if you have to fix an engine would cost as much as the brand new car.

@AKAtheA Жыл бұрын

where's the high-tech? I didn't see any... Anyway, the reason it costs so much to fix stuff here in EU is the price of labor. There are companies in EU that remanufacture expensive car parts like engines, gearboxes, starters, alternators or AC compressors, but they do it at volume in a specialized factory, where they can afford the investment in actual high-tech and the skilled workers *and* produce remanufactured parts that meet OEM spec.

@JamesBrown-ux9ds Жыл бұрын

They do it the expensive way actually, that's why they are poor but have a lot of work to do. Harvesting California almonds with a machine takes one man and the machine only, the guy all day long doesn't leave his machine seat once. The cost per one almond harvested are close to nothing, but just two get employed - the man on the harvester and the computersystem in the bank taking care of the incoming constant stream of revenue. All others go trailerpark. (And with hardcore capitalism most of the time the bank is in charge, not the self-governing of the people.) (Some of the people no longer employed here may join the army (instead of heading trailerpark) to make shure that the number of Almond farms grow as far as our influence reaches. And there are other jobs, but few.)

@oddwad6290 Жыл бұрын

I doubt a hi-tech company would refurbish a block with so many flaws ?

@Happy357mag Жыл бұрын

Do you know what DIY stands for?

@juhomaki-petaja Жыл бұрын

@@oddwad6290 And why even weld stripped threads, just put thread insert in

@metafikulislam1590 7 ай бұрын

Engine never die in Pakistan, great work!! Love u guys from Bangladesh

@nikishanishe Жыл бұрын

Наш гаражный ремонт, курит нервно в сторонке☝

@user-dx3ld2lk3u Жыл бұрын

у нас технологии есть

@FOMO-hv9jy Жыл бұрын

наш гараж для них нанолаборатория))

@bikall1 Жыл бұрын

30:43 the quality manager says "the deck is within 1 mm straight". But we are not responsible for the crankcase flanges.

@anthonyallwood593 11 ай бұрын

Always have much respect for you guys archiving excellent results with basic tools and high effort.

@onoff1688 Жыл бұрын

Все показали кроме того как шашлыки жарили пока блок прогревался в углях😂

@jeksonjekson-sb1ed Жыл бұрын

😂😂😂КПД 150% тогда будет

@killr69 Жыл бұрын

ежжи мангал из блока хароший☝️🤣

@ManiacRacing Жыл бұрын

95% of success on this type of work is down to heat. Preheating, and more importantly, proper post repair heat control is the key. Mad skills considering the primitive conditions

@Happy357mag Жыл бұрын

Agreed. They have it down to a primitive, yet effective science.

@andycraig6905 Жыл бұрын

Welcome to Cuba, where there's never been anything new since the 50s because nobody wants to economically support the communist regime. Or many other places like it, where there's very few if any new things imported or made domestically through economic sanctions or abject poverty. So they have to make do, and you'll see people doing valve seats and crankshafts by hand and reconditioning old burned up engine blocks like this.

@ManiacRacing Жыл бұрын

@@andycraig6905 Exactly right. they make do

@manuelg97 Жыл бұрын

@@DontCryAboutIt Concrete? at max it was compressed mud

@inebriatedengineering6288 Жыл бұрын

This is what I imagine anytime that I leave my engine block with a machine shop.

@flexinclouds 10 ай бұрын

LMAOOO YESSS😂😂😂 This is what I imagine if I ever needed my 05 wrx engine rebuilt. So ive decided Id just do it myself😭😭😭

@mikel9656 Жыл бұрын

as an Aerospace engineer, I watch this and at first I wasted to laugh, then I thought about it a little bit more. The skillz needed to do this project with the tools that they had access to was incredible. Just the part where they pre heated the block to be able to weld it. That's hard to do with the proper tools.

@tony359 Жыл бұрын

I was thinking exactly the same!

@dannymaiorani519 Жыл бұрын

I'm an Aerospace Machinist and Programmer. I understand they're doing what they need to do to survive, and this is really their only option, but we also both know that this is basically not something that's going to last 100k miles, it's survival mode. That said yeah, most people on Earth couldn't even do it with the proper tools.

@santiagokinen4711 Жыл бұрын

@@dannymaiorani519 it'll last until it sells, then it'll be the next owner's problem 🤣🤣

@user-xs9gd1lm2x 11 ай бұрын

If the block is not preheat the weld wont fused. This is usual applied nonferrous metal and cast metal.

@TungstenCarbideTempe 11 ай бұрын

Aerospace engineer?? Impressed?? You got no clue what’s really going on here and how pointless and crappy the results are. If you are who you say you are and impressed with this quality of work- our space program is doomed

@Gleb-Iudintsev 11 ай бұрын

Упаси меня провидение попасться на такой восстановленный блок когда-нибудь...

@alxvlx9020 Жыл бұрын

Мамкины эксперты уже приговорили блок, работников и работу!

@user-gg7bs1jc5k Жыл бұрын

ну для начала, окна все забиты в шлаке.

@killr69 Жыл бұрын

ясно дело,диванные ремонтеры всем ремонтникам ремонтники😄

@user-gg7bs1jc5k Жыл бұрын

@@killr69 Ну веруны в то, что это работать будет, явно таким работникам не отдали бы свой блок)

@Oli83two Жыл бұрын

Die Mittel sind einfach, ja. Aber das know-how, wie man so einen Block repariert, ist da! Das fasziniert mich! Super Arbeit! 👍

@SupremeCannon1965 Жыл бұрын

Saw a similar video where they hand casted cylinder liners too. It all looks very primitive but the first version of any machine in the Industrial Revolution was probably made in a similar way.

@annoyingbstard9407 7 ай бұрын

So they’re only two hundred and fifty years behind the civilised world.

@SupremeCannon1965 7 ай бұрын

In some areas perhaps. Pakistan has nuclear ballistic missiles too though. Seems to depend where the capital goes.

@spannerman2887 Жыл бұрын

For the tools they had available they made a very good job.

@calvinsmith9410 Жыл бұрын

This puts a new twist to working with what you have!

@Shmbler Жыл бұрын

In a postapocalyptic world, these people would be the only ones driving cars.

@envitech02 Жыл бұрын

The equipment they use looks like they date back to the British East India Company 😂 But hats off to these talented machinists and mechanics!

@alejandrogarcia-oo8nl Жыл бұрын

I couldn't believe it when I saw the process..! I have a lot to learn. My respects to those workers. thanks for showing your work

@philsmith214 Жыл бұрын

In a throw away world i wonder if anything gets chucked out, the cost difference in getting it done here and getting it done at a dealership must be an eye opener , these guys are so skilled

@baldyoldfart5828 Жыл бұрын

if you found out what these guys get paid you would cry... the good thing about a society in which nothing gets wasted is the fact that nothing gets wasted... the bad thing is someone has to do this for next to nothing to make it worthwhile... its like paying $200 to get a toaster which would cost $50 to replace fixed... its sad..if nothing else these guys get my utmost respect

@Hollygolligthly 10 ай бұрын

Maestros mecánicos!!!! Vista, ingenio y experiencia. Mis más sinceras felicitaciones

@reubenmosman9466 Жыл бұрын

Great work . . . I really liked how you guys can save the block. It's very interesting.

@535tony Жыл бұрын

You can do this when Labor is cheap. Great job for the conditions.

@krokus4512 Жыл бұрын

Вот это завод, между цехами маршрутки тук-тук ездят. За гильзование лайк.

@Cyanidez07 Жыл бұрын

Переживал за пальцы парня:)

@SuperGemma2010 Жыл бұрын

amazing skills with old school machines and techniques , love it

@mr.eswatchreviews Жыл бұрын

I will be the first to admit that came out looking a whole lot better than what I thought it would but I would still like to see it run

@user-qc2cp6ks9m Жыл бұрын

Old white-bearded man is a magician of the cast iron brazing 👍

@harjinderkaur2384 Жыл бұрын

Its actually the right way to weld cast iron. U gotta keep it hot while u r welding. He didnt just get old doin nothing. Thats called experience. Hes fully confident abt wat he did m these things do work man. We as modern men we dont knw shit, we depend on machines but no experience of aur own.

@sakil8272 Жыл бұрын

And there are some people who only know to spread negativity in these types of videos

@aramirez8427 Жыл бұрын

That is incredible......Great job.

@marksakowski9272 Жыл бұрын

Mesmerizing precision and high tech.

@dengraf110 Жыл бұрын

При запрессовке гильзы . должен быть выступ 0,02мм.при установке ГБЦ будет норм,а так прокладка ГБЦ дунет при первом выезде

@alexmaiskiy2763 Жыл бұрын

ничего страшного, за то опять работа будет))))

@pan4es30 Жыл бұрын

Не умничай они так пол жизни хуярят

@alexmaiskiy2763 Жыл бұрын

@@pan4es30 ничего кроме фактов

@KKonev1 Жыл бұрын

Да у меня вообще вопрос: сколько они наварили к плоскости, и сколько потом сняли? Как они ловили размеры? Смотрится, будто наварили где-то сантиметр, а потом сняли столько, сколько Будда на душу положил

@rover_888 Жыл бұрын

Я ничерта не понимаю в ремонте но тоже подумал, на тему, допусков/точности и тп. Что наверное таким способом можно ремонтировать какой нить трактор времен Черепанова, но ремонт технологичного современного двигателя, с гарантией работы, вряд ли.

@doutordelmar Жыл бұрын

Very good job , now the block is New , congratulation Brasil

@acescape88 Жыл бұрын

No!

@screwsnutsandbolts Жыл бұрын

Excellent job ! 👍

@dimiereeds1770 7 ай бұрын

love these skill full guys. we need more of this kind of talented people. they re saviour

@FrankBenlin Жыл бұрын

That is a lot of work on that block. I hope it runs for many miles. Thank you.

@JoseLuis-ob8bn Жыл бұрын

Que material usan para rellenar con el soplete , desde ya gran trabajo saludos desde Argentina 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🇦🇷🇦🇷🇦🇷🇦🇷🇦🇷🇦🇷🇦🇷

@byronmorris1594 8 ай бұрын

Wow, that is a fundamental way of repairing engines.

@bbrown-ed6if Жыл бұрын

Awesome to watch !!!

@pipi7731 Жыл бұрын

Great job. I wonder what these guys could do with new equipment and a better work area.

@marcmercedes2707 Жыл бұрын

They could rise the price😂

@rickvaiBBB Жыл бұрын

No better but faster.

@ANKUDOVICH Жыл бұрын

Что скажет ТРАВНИКОВ? В ремонтах двигателя не шарю, но выглядит красиво

@andrei_shut Жыл бұрын

Может оно и будет ходить, но вопрос - нахуя? Столько трудозатрат ради блока от матиза какого то

@user-bd2ow5dh5l Жыл бұрын

@@andrei_shut потому что бюджет этого ремонта банка пива и два бутерброда без мяса. А купить рабочий двигатель, даже контрактный, для них это работать всем населением улицы месяц. Они не от хорошей жизни всей этой хуйней занимаются.

@andrei_shut Жыл бұрын

@@user-bd2ow5dh5l возможно ты прав. Знать бы их цены на токарные, фрезерные и сварочные работы, тогда б понятно было. Но возможно это восстановление ради видоса было. По типу, когда филипки мопеды сжигают и оставляют на улице, а потом видос о восстановлении делают

@user-nb2qr5dx5w Жыл бұрын

@@andrei_shut от Мерседеса старый где то 60-70ых годов не более

@user-nb2qr5dx5w Жыл бұрын

@@andrei_shut 10000 тысяч рупий

@anthonysantiago1999 Жыл бұрын

Its sure not Jims Automotive machine shop but Im Impressed!!!

@seblecrab 7 ай бұрын

I just love to see this is possible, the craftsmanship is amazing

@tiramissu90 Жыл бұрын

Ребята, я мало что понимаю в двигателях, но даже я в ахуе от увиденного, особенно расточка цилиндров

@ltt2952 Жыл бұрын

Мобильные расточные ссср тоже выпускал для ремонта двигателей. Обычное дело.

@xamprus3876 Жыл бұрын

Так скільки в нас тут похибка при токарних роботах циліндра? єммм... ну 5--500 десь

@ltt2952 Жыл бұрын

@@xamprus3876 не идеально конечно. Люди просто решают задачи тем что имеют.

@kledomuc1713 Жыл бұрын

Great skills with minimalistic tools, it’s really nice to watch. Thanks

@safaatchannel4538 Жыл бұрын

Good process of boring and holing engine block. 👍

@mr.mendez9378 Жыл бұрын

Looks like a Perkins block. We used the same type of boring bar, and the same method installing the sleeves. The labor was less expensive as the actual parts in Mexico.

@josip.harasic Жыл бұрын

Yes, fi 91,48mm cilinder bore...

@whathasxgottodowithit3919. Жыл бұрын

Good job Guys, looks like a Perkins 3.152 diesel from a Massey-Ferguson 35 or similar.

@karlhrdylicka Жыл бұрын

Alistair Powers . Most certainly does appear to be Perkins 3.152.

@madeljacky Жыл бұрын

Definitely looks like a Perkins block 100%, I would tend to think its a AD 3-152 block from a very late 135 or an early 240 because it has four studs to hold the lift pump on, 35's and early 135's had two bolt hole lift pumps. Also far as I can remember a 35 engine has 15 head studs where the 135 has 18 head studs, this repaired block has 18.

@KimenjoRombu Жыл бұрын

Adorable work. Thumbs up guys

@mhdhaswad6958 Жыл бұрын

Terima kasih perkongsian video nya sahabat 👍👍👍

@nickyholdich7695 Жыл бұрын

The process is amazing to watch but I can't help but wonder how many workplace accident these guys have. I don't know how many blocks these guys make a day and how much they earn but given the right conditions and tools, their level of output would be amazing.

@danv5075 Жыл бұрын

Правильные условия и инструменты никогда не окупятся пока там низкий уровень зарплат

@thefreedomguyuk Жыл бұрын

Never seen anything like this. He drilled right into those liners 🧐

@DatBlueHusky Жыл бұрын

so? its being sleeved anyways. They do the same thing here with block repairs

@markshort9098 Жыл бұрын

It doesn't matter, they replaced the old material with new material.. they have to open the hole out enough to get a propper weld in there without porosity or cold lap

@abrahamhdz 11 ай бұрын

Amazing! Love watching you guys!

@sidineym.s.8138 Жыл бұрын

Bom trabalho. Abraços do Brasil 🇧🇷

@rxwhat33 Жыл бұрын

And to think this labor intensive process must be less expensive than buying a new engine block, props to these hard working people.

@peterrogers626 Жыл бұрын

With many of these parts there is nothing available new anymore!

@tomislavkukic1395 Жыл бұрын

Looking at the conditions they work in this is perfect job. They did everything right with what they have. The negative comments left out from people that do not know to even take it a part. Also, this is worth doing because of the extremly cheep laber. If somthing like this going to be done in USA it would cost like a new car because it is way too expencive to pay the people with knowledge to do it.

@danv5075 Жыл бұрын

Ну почему же? Есть ролики и из США с восстановлением блока цилиндров. Только оборудование выше классом и соответственно трудозатраты меньше. Хотя согласен - детали от распространенных двигателей никто бы не стал восстанавливать.

@sergius0202 Жыл бұрын

Судя по комментарию вы тоже слабо представляете процесс капиталки мотора, который и делают, потому что нет средств на новый мотор, ни говоря о машине. А вообще в вашей стране проще купить машину поновее, ибо у вас б/у стоит копейки, причем такое б/у которое у нас считается чуть чуть подержанным.

@m90dar Жыл бұрын

This is Pakistan nothing goes to waste.. The skills in Pakistan are the best in the world.. With minimum tools.

@kennyg1358 Жыл бұрын

Lol. You need to get out more.

@gersongomesdasilvagomes5613 Жыл бұрын

Parabéns pela conquista e superação.. abraço a todos....da equipe... Brasil

@wilsoncipriano Жыл бұрын

O problema que esse é um serviço praticametne estetico.

@felixacuna4139 7 ай бұрын

El problema aquí en esta empresa, que los tienen 0 cero implementos de seguridad, que es mucho más importante que el resto, no cree usted...?

@robyesidra9490 Жыл бұрын

Real job,Real man.

@acescape88 Жыл бұрын

No!

@olduhfguy 10 ай бұрын

Portions of this video are hard to watch but they have come very close to the same result as a fully equipped machine shop, but only with basic tools.

@cedriv1334 10 ай бұрын

Super video, sa m'aurait donner envie d'en acheter un mais le tarif est évidemment beaucoups trop elevé pour une utilisation amateur. Je trouve tes videos tres complete et bien structurer , meme pour un néophytes comme moi qui ne bricole que tres peu a cause du temps que je n'ai pas. Merci à toi pour eclaircir nos lanternes .

@adresokol7234 Жыл бұрын

Расточка цилиндров вообще огонь

@levali3699 Жыл бұрын

🤣😂😂😂😂

@user-dt4dn5ld7w Жыл бұрын

Больше гильзовка удивила 🤪

@erikziak1249 Жыл бұрын

Impressive. How long will that block last until it warps and cracks again?

@the_chomper Жыл бұрын

a week likely

@DatBlueHusky Жыл бұрын

never, ive seen blocks last another 15 years of hard service done like this. These guys been doing this for many years and find what works. Here in north america, everyone is lazy and just replace shit with new, no one here knows jack shit how to repair engine blocks like this anymore. All most of you just comment crap how its going to crack etc etc but dont know anything.

@JohnyMcNeal Жыл бұрын

@@DatBlueHusky any proof?

@robertook Жыл бұрын

@@DatBlueHusky fully agree, if it cracks these guys will rebuild it again but I doubt it cracks. 3.152 engines are very good and robust. Apart from througing the block the rest is just an art. This is what it means to be green eco friendly.

@mehdihani2932 Жыл бұрын

@@JohnyMcNeal we live in pakistan and this video is from pakistan too These rebuilds can easily last 150000kms

@boydr7160 Жыл бұрын

They are trying their best with what they have. Great job.

@iamtyboogie5600 Жыл бұрын

better than some machine shops i've been to

@grantreid8583 Жыл бұрын

I have been out of the engine reconditioning game for a long time now but that engine block appears to be a perkins p3 to me either that or it is a copy of one. Very common in older tractors etc have re sleeved quite a few myself and reground the cranks etc.

@rodrigoandrei50 Жыл бұрын

perfect service congratulations... I really admire this work here where I live there are no more mechanics just change the parts....you are true and unique.....

@jasonhooey5677 Жыл бұрын

Often times with newer cars, replace the part is all we can do

@patrikcerny3458 Жыл бұрын

the reason for replacing parts instead of repairing them is not experience, but economics. Those who work with their hands know this problem, because it often happens that it is cheaper for the customer to give a new part than to repair the part. It often happens in practice that a customer comes with a stupid question: why does it cost so much money? I won't pay that much for it...

@rickrandom6734 Жыл бұрын

These guys earn less in a day than you earn in an hour, thats why.

@guyness5064 Жыл бұрын

Je suis bluffé comme à chaque fois ces types sont géniaux !😎😎

@timclarke5156 Жыл бұрын

its amazing how complicated work can be done with simple skills and much ingenuity. well done.

@mariarusso3790 Жыл бұрын

Hello Tim how are you doing 😊

@user-xm2jt5cr2p Жыл бұрын

Официалы на Мерседес курят нервно в сторонке за углом. 😲😲😲

@user-gg7bs1jc5k Жыл бұрын

Главное, им это не показывать)

@cenkyildir9847 Жыл бұрын

Bu mükemmel bir el emeği örneği. Zanaat bu olsa gerek.

@yrwingutierrez1622 11 ай бұрын

Excelente querer es poder son muy buenos en su trabajo humildemente los felicito desde Venezuela

@user-cv7kl3cx1k Жыл бұрын

В 96-ом я наплавлял кулачки на распредвал на судоремонтном заводе. сейчас завода нет

@user-oy6dp4ul2i Жыл бұрын

Мне мастер знакомый тоже самое делал на двигателе 1.7D от VW Т3 фургон. После чего авто пробежал немало, пока не продали.

@krokus4512 Жыл бұрын

много наплавил, завод разорил

@nexgenua Жыл бұрын

Я так и не понял, что я сейчас посмотрел, это же стеб? Я думал они сейчас это все эпоксидкой зальют и сделают подставку для стола, что бы продать Тому Крузу за лям зелени, в крайнем случае пепельницу сделают, если смола пузырьков много даст, но такое… Шок контент.

@user-yy8wn7jo8d Жыл бұрын

Что именно тебя смущает?

@andrei_shut Жыл бұрын

@@user-yy8wn7jo8d лично меня смущает колличество трудозатрат ради куска чермета

@Alex_SRX Жыл бұрын

@@andrei_shut скорее всего в той стране добыть новый блок стоит больших трудозатрат

@andrei_shut Жыл бұрын

@@Alex_SRX да ну. В Индии транспорта офигеть сколько

@andrei_shut Жыл бұрын

@@Alex_SRX если его трудно достать, то нафиг он нужен? На него и запчасти будут дорогие, если он сам редкий

@bobg3034 Жыл бұрын

Great job!

@retoo3015 Жыл бұрын

ما شاء الله

@JoseVGavila 11 ай бұрын

The MOST USED TOOL on these videos is... the 7-UP bottle with different chemicals on it! 😅

@duronse Жыл бұрын

Respect! So many hand work, never thinked that can be possible without factory conditions.

@user-es3xu3pj6v Жыл бұрын

Скоро Украина освоит эти технологии. Станет "аграрной сверхдержавой" 🤣🤣🤣. Пакистан тоже когда-то поверил американцам. Стоит задуматься.

@mariarusso3790 Жыл бұрын

Hello how are you doing 😊

@theguywhopost 9 ай бұрын

Awesome 👍😎 video quality as well as workers skills ❤

@user-sm2xy1vd2w Жыл бұрын

Вообще есть неиллюзорные подозрения, что все это делается исключительно для видосов на Ютубе, целая индустрия таких роликов. Тут тебе и оператор, и монтаж, и миллионные часто просмотры, а таким образом "восстановленный" двигатель просто в помойку))

@AlexNSK1 Жыл бұрын

а что с этим восстановлением не так??

@user-pd8fr8ii9u Жыл бұрын

@@AlexNSK1 да он умничает, насмотрелся немцов, японцев и думает, что он умнее и делает лучше других

@pan4es30 Жыл бұрын

@@user-pd8fr8ii9u если с санкциями так дальше пойдёт то скоро и у нас будут такие ролики записывать)

@user-yy8wn7jo8d Жыл бұрын

@@AlexNSK1 Да тут полно таких детей 21 века, которые не могут себе представить, что почти все можно сделать руками, с минимумом станков.

@andrei_shut Жыл бұрын

@@user-yy8wn7jo8d да блин. Целый блок такой можно найти за сколько? Баксов за 60-70? Причём который достаточно будет фрезернуть и расточить под ремонтный размер. Зачем столько трудозатрат?