The train doctor is back

Harrison, great job on fixing up the old trolley. 😊 One neat tip that I learned when custom painting stripes in my garage years ago is to use one more coat of the underlying color AFTER masking the paint line off. This seals the edge with the base color and provides a nice, crisp edge. I've been using this technique on my models and have found that it works really well for them, too! 🚂🚃🚃🚃🙂👍

The Bowser PCC body is made from cast zinc alloy, not lead. It is not a toxic metal. The rope allowing the trolley pole to be pulled down goes into a device called a "retriever." If the retriever is working correctly, the rope will NOT hang down. The retriever is a safety device and contains a strong, spring-loaded reel to keep the rope taught. The retriever also contains a clutch which allows the rope to play in and out as the pole follows the trolley wire sags. However, if the pole dewires, the clutch engages to prevent the pole from suddenly springing up vertically and snagging on the overhead wire support arms, possibly tearing them down. (Trolley passengers are safe, being inside the grounded steel body of the car. However, they would probably not appreciate the 600 volt fireworks happening outside.)

Always a pleasure to see a old model train given a new lease on life

My favorite videos are when you bring these old models back to life.

Congratulations Harrison on a splendid job. I’m a retired T.T.C. driver (although they called us operators, when we drove streetcars). I started with streetcars in 1970 and moved onto buses and the subway two years later. You did a great paint job as well, and It brought back memories as I watched you work, and run it on your layout. I have a bachmann pcc in Toronto Transit colours that I run on my n scale layout. once again well done, and thank you

Something I started doing years ago for glass in my models is, after buying anything that's packaged in hard but flexible clear plastic with a lot of flat areas, things like Q-tips and some electronics, hold onto the plastic part of the packaging, then, when needed, cut the plastic to size and glue it to the inside, it now looks like the windows have glass from the outside of the model.

Instead of a paper napkin try to get cheap tooth brushes that you can clean and re-use, they get to the tight spots well enough and they give a good scrub too. Keep it up i love your videos!

He was working in the lab late one night, when his eyes befell a dreary sight. Seems the trolley he bought was not quite right. With a little TLC and ingenuity he got it going again as you see. An ode to Dr. Trainkenstein. Great job Harrison. 👍

Nice! I'm glad you could fix it. It look beautiful!

Great job restoring that PCC trolley! I enjoy seeing you bring old models back to life and running on the layout!

Amazing repair yet again. At first, it looked like a "simple" clean will do, but I didn't expect it to be this much work. I do own a Bowser locomotive as well, the PRR E6 Atlantic kit. That thing was also a huge pain to get running again after the original owner abandoned the project 40 years ago and the model shop gave it to me for free. Really like the paint job you did. I paint my locomotives with a brush, as I don't have an airbrush. Runs very nicely now and looks stunning. Another locomotive saved 👍👍

Rode PCC's in Brooklyn, NY as a kid . The trolley barn at Coney Island was my favorite. Super work, Harrison.

Another one brought back from the dead. Great work, Harrison!

Wow....that was basically a complete re-build on that trolley. Superb work, Harrison! And, it's running relatively quietly as well. My congratulations!

Well done Harrison, what a great result from your skill and dedication! Running so easily…

That "pantograph" was actually the trolley pole

Nice restoration Harrison, Looks good running down Main Street! Rode Line 28 in Lisbon (1930's trolleiy) in May and the wheel popped out of the wire at a particularly tight turn. Engineer had his hands full guiding it back in, as the tourists looked on.

So, it now looks and runs great, Congratulations!! As a kid I have ridden TTC PCC cars in Toronto. Love your Trolley pole.

The wizard strikes again 😊 great job Harrison.👍👌😇😀

Really nice restoration on this trolley or streetcar man! Yeah the oringial owner who had this must’ve did alright job on the paint i would say at least they tried and that thing runs like a champ now you restored this!

Even though I'm not a train person I love to see the enthusiasm for your hobby, was facinating watching you repair the train for someone so young as well, keep the videos coming, all the best from the UK

I'd be using an old tooth brush to clean up those greasy parts using Gunk. Serenity! We have a runner! Now you need to add an interior LED light. Cheers from eastern TN

you are a jack of all trades Harrison nice job bringing her back from the dead👍

I've seen several of your videos and bro you are unbelievable repairing locamotives. This one is awesome. Great going dude.

Loved to watch this recondition of this street car. You really have mu juices flowing on rebuilding my collection after loosing everything in a fire. I am learning so much...

That was an amazing transformation. Great work on the old trolley!

One of the things i like most about this channel is your knowledge and tenacity to get things running again. Great job and keep the vids coming.

Nice job Harrison. Inspirational as always. Another significant rehab. The electrical work and grease removal really show what a challenge that was! First time post but getting caught up on all your videos. Would love to see your top 5 cheap STEAM loco brands to compliment your Top 5 under $20 diesel video.....

I can’t believe you made that thing look so good. Nice job and awesome video.

"It's Alive," said Harristein enthusiastically. If anyone can raise the dead from the locomotive graveyard, Harrison can. And yes, Definitely Dodgy Trolley Track, but realistic. Gotta get an airbrush, and definitely a coat of primer first. But that's a whole different skill set. Thanks for sharing. 👍🐾👍

That makes me happy to see something so old simply come back to life again, good job Harrison. Even though I never been on one, I've always liked Trolley's, Trams & Interurbans and the stories behind them. From what I've gathered they would be the most practical way to go shop in a major big city's to cut down on traffic congestion. I wished we still had them to travel on Connecting small Townships to the big City's via light rail it would make for a relaxing commute.🚞🚞

Great restoration, SMT! I was aghast when I saw all that old grease too.

was Awesome you got that trolley working again Harrison, As if there was ever a doubt.... Knew you would figure a solution out and get it going down the tracks again. Well Done.

Having built many TTC bus and subway models this streetcar is right up my alley! Awesome work SMT, you are on a roll!

hey Harrison another great video excellent work. The old streetcars are actually named red rockets here in Toronto. But Stomoing Tom's name is good too

Nice to see it refreshed. You should definitely consider getting an airbrush for painting.

Fantastic 31 minutes to watch. Love the sound of these motors. She took right off in the finale. Nice find, great job.

Absolutely incredible. A true restoration. You turned an ugly troll into a shiny trolley. Yikes, that was bad.

Great job on the repair. I like working on the old engines. Nice touch to add the pantograph. I've used large paper clips to make one.

Automotive engine primer has very fine pigments and is an excellent rattle-can base coat for cast metal locomotives. Wet sanding lessens the problems of lead aresol. Wear gloves and a mask. Ter-on-O. That's a word I haven't heard in a long time. A very long time. Excellent work, as always. Keep having fun.

Nice resto on that PCC and that on the fly trolley pole worked nice. IIRC if you still have the window " glass " one of those disposable clear food storage containers and submerge the the window piece in hydrogen peroxide and place it in a sunny window for a couple days. It's a trick for bleaching yellowed plastics. Failing that or in addition to very very fine grit sandpaper will act as a polish to remove the yellowing and any fine scratches or fogging can be fixed with a dip in an acrylic floor wax like the old Future floor wax. Just dip and let dry

Amazing restoration! Well done SMT!

great job bringing it back to life again

Nice Job! Harrison you have excellent skills and excellent creativity!

Dear Harrison, great job !!! One idea to exchange the spoiled original plastic "window- layin" of your model: I had a smilare problem with a nowerdays more than 60 year old model. I took a smooth plastic stripe of a packaging from a chocolate item and made it in form carfully with a light warm stream of a hair-fan. Has been a fantastic result ! What a pitty that i can't show you photos about my work via YT ! Try it, the effect is amazing and you only can win with this for your model ! Kind regards to you Thomas from Berlin, Germany

Great job 👍 and what an amazing job you did with making the electric pole that looks so fantastic 👌

Will it run again? That's the million-dollar question. As always, you seem to have the Midas touch. Glad to see the streetcar running again. Another job well done. From Texas

Suggest cleaning the commutator slots as the last step after polishing. The polishing process may put detritus in the slots.

Very nice restoration. In Massachusetts we still have PCC cars in regular service on the Mattapan High Speed Line. The Massachusetts cars are the only pcc's in the country that have doors on the left.

Great job Harrison! Please continue to challenge yourself. I love watching videos where you bring engines back life.

Really nice paintjob there! very sharp. Makes me want to get right to the repaint that I have planned.

Funny thing...first ad I got on this video was a Hornby ad for their _Flying Scotsman_ . Never thought I'd see one of those here, but at least it was appropriate to the subject.

Hi Harrison, I love your SMT Videos. I watch you every day. Many times. I'm a big fan of you and your videos make my heart beat fast. I'm a big HO fan of yours. We love your channel so much--Charlie, from Michigan- Age 5.

When I was restoring my 1960's motorcycle I learned that NEVER use those cheap, garbage masking tapes they sell at the regular hardware stores. I use the Tamiya masking tapes ever since.

Great jog rehabbing a neat old trolley. Now you need to add more track to your trolley line.

Maybe you could find some water slide decals and customize it to your liking.

Sweet restoration! The coachwork is stunning and a throwback to times past. Painting tip; after spraying one colour, make the areas to remain the base coat and then use clear coat. This will find any gaps in the masking tape and fill them with a clear shield. Once dry, spray over with the second coat. When you remove the masking tape, there should be no bleed of the top colour on the base colour. Then clear coat the whole thing to protect all of the paint from chipping. Use several thin coats rather than a few thick coats to avoid runs in the paint. A brass brush is a good alternative to sanding the shell before paint. Brass will not scratch the metal as much as a steel brush. It does help provide a good key for the paint. Try to use a primer before any paint as this will provide a good base layer for the main colour. Liked and subscribed!

Now you got a work trolley for the town folks to get to the Hershey's plant!

excellent work. It is a joy to see and hear your excitement at the success. This is a great channel.

Congrats for your "new" PCC, great job!

Loved your video bringing the trolley back to life!!! And it is very satisfying when "the efforts pay off"!!!! Thanks for doing the video.

You do really good work with a creative positive attitude. Now here is the thing. These modern chemicals (this is not in reference to the specific product you are using) can be very hazardous and may be absorbed by your skin and you should always use some type of hand protection such as nitrile gloves. Yes, gloves may be a nuisance but may be well worth it in the long run. If there is any danger of fumes or splashing you should consider further precautions as well. Happy silver railz.

cool to see this run again - good job

Every repair job is a learning experience ! Great job !

The one thing that makes me happy is how you have the same appreciation when it comes to knowing that the train hadn't been on the rails in 20-40 years. All the world events and generations came and gone and she lay silent....until now! To run again! I love all my old 40's-80's HO and I understand this more then you think. P.S. I have a bunch of goodies at trains and such like these that have arrived! If you are in town or need something let me know!

The shot on the streetcar track is fantastic. Another great video!!

Here comes the Toronto Flyer racing down the tracks, look at her go!

When painting always file and sand the flash off. The masking will then stick great. That will create sharp, crisp lines.

Nice, we had these pcc cars in the Netherlands too. Also yellow, and most had a slightly different window configuration.

Ultrasonic jewelry cleaning machine works really good on stuff like take. You did a really good cleaning that up.

What a fabulous little model and a very successful restoration looks great. I hope to see you painting more models in the future...practice makes perfect... Rich...

For removing paint, I use lye in boiling water. It works so much better than regular paint stripper and is much easier and less finicky to work with

Impressive restore of this old Bowser PCC. Painting with a "rattle can" won't yield great results but you can go back to it later when you decide an air brush and air compressor should be purchased. Then you can get some decals to really make it good! The trolley retriever wire was usually a taught wire that went to a bell shaped container holding a round spring inside and some extra space for extra length of wire mounted on the rear. That might be added later too.

Excellent choice of livery! I volunteer at a trolley museum with sister Toronto cars of this type (they're called PCCs)

Harrison fantastic work. Superb video.

Hi Harrison I Think this tram must be at least 60 years old,I`ve seen a lot of your repairs but i think this is surely in the top 5 You`ve held in your hands, I think it`s great that you you can still get some things working, Just to get that paint off,That`s A strong stuff, Because you always have to watch out,What kind of substance is in the paintwork, But he`s done well, Good looking work Harrison, I enjoy your Channel Beautiful MVGR Henk From Belgium Essen Village,😀😉

The TTC used to sell the plastic HO model of that trolley. Eventually I hope to have mine travelling the main street of my town.

You lay out looking a lot cleaner I see there a party going on at the town center. Great work on that old trolly love the new colors

That is so cool to see that old thing come back to life

Really nice job It great to see you getting the old trolley going. Thanks for the video Harrison.

Dawn dishwashing liquid cleans off grease and oil well. Also, a sonic bath does the trick!

Really good work Harrison! I'm surprised there was not a working light inside. Perhaps that is what that tab was for on the non powered truck.?

👍👍WOW! I'm totally amazed...Great job! 🚂🚂

Great video would like to see more like these with updated paint jobs. Don’t know if they sell it in Canada but you can pick up air craft stripper at auto parts like autozone strips paints in seconds on old die cast cars.

Nice restoration on the trolley Harrison!

that my froiend is a piece of history The PCC (Presidents' Conference Committee) is a tram design that was first built in the United States in the 1930s. The design proved successful domestically, and after World War II it was licensed for use elsewhere in the world where PCC based cars were made. The PCC car has proved to be a long-lasting icon of streetcar design, and many remain in service around the world.

Save!!! You might be able to clear up the windows with some polishing compound and a coat of Pledge floor polish.

Great job in getting the train Tolley running again on the track from the 1950's ! Love the video 😊❤ 💯👍👍👍! Wow 😊😊 she lives !

Hey Harrison, with your Hershey factory of the layout looks amazing! My Dad used to haul milk and delivered to the Hershey dairy, was able to go with him a few times to the plant and they would always give you Hershey bars to take with you.

If you want to restore the plastic windows of you train you can try and use some floor glass cleaner after sanding and cleaning the plastic with soap and water. I use it to restore the Windshield of my 1/64 diecast cars and it works great!

The fibreglass brush is useful for rubbing back the alloy body to a burnished finish.

You should sand paper the metal first then spray a paint primer, then your colors. Always let them dry for several days first.

Looks to be a great restoration. Something that you may want to consider is buying an ultrasound cleaner for degreasing metal parts. It may speed up the process the process of degreasing and cleaning.

Grease was trying to turn itself back to dinosaurs.😂🚂🇨🇦

You did a great paint job,looks really cool 😎👍😀👌👏😄.

Excellent work! Very well done. Thanks for the video,

Love the way the trolly worked out nice job , I love it!

That was a gross amount of gunk in those gears. For smaller things like that, I use an ultrasonic cleaner with a mix of 75% Simple Green and 25% water. That same ratio also works for paint removal for most hobby paints. (Ultrasonic cleaners are also wonderful for carburetors!)

Super job on reviving that one. Well done!!!