DIY 3-1 Merge Collector | Stainless Steel
Рет қаралды 1,770
Ай бұрынDIY 3-1 stainless steel exhaust merge collector
This video shows how you can make a merge collector yourself, step by step.
Thanks for watching.
@Drifteurfou65 Ай бұрын
hi thank you for giving us the tips for manufacturing 🙏 how do you know what angle you need for a 4 in 1 or a 6 in 1? how can you know how necessary it is?
@GPGarage1 Ай бұрын
Hi, I'm glad I can help. The angle of rotation of the tube between the cuts are: 3-1 60 4-1 90 6-1 120 For example 6-1 collector 360°÷6=60 60 is the rest of the pipe that must remain on each pipe in order to connect them to get a 360 degree circle at the end. Now we calculate turning angle of the pipe betwen cuts 180-60=120
@Drifteurfou65 Ай бұрын
@@GPGarage1 thank you for your help 🙏😊 so if I understood correctly with the final calculation it gives 41.86 to trace on the paper? How much did you trace on the cutting template? to place the tubes mark
@GPGarage1 Ай бұрын
Yes that's right. 6-1 collector and a 40mm primary tube.
@marcinbaran7418 Ай бұрын
The question is 3.14 is where does it come from ?
@GPGarage1 Ай бұрын
Pi = 3.14 The number π (/paɪ/; spelled out as "pi") is a mathematical constant that is the ratio of a circle's circumference to its diameter, approximately equal to 3.14159.
@marcinbaran7418 Ай бұрын
@@GPGarage1 Thanks
МИЛАНА ТУТ 👀
Рет қаралды 6 МЛН
Kris Clark
Рет қаралды 4 М.
Ебэрис
Рет қаралды 4,3 МЛН
BossHorn - Train Horns with Remote Control
Рет қаралды 147 МЛН