DIY 50,000 Volt Arc Lighter Powered Tesla Coil (ft. Integza)

Рет қаралды 754,253

Күн бұрын

Equal parts Arc lighter, ancient tech, and modern design, this is the ultimate DIY palm-sized Tesla Coil. A one day build, this coil provides up to 50,000 volts, and is fully rechargeable. This build is meant for those who have experience with high voltage. So, what are you waiting for? Tesla is calling! #Tesla #DIY #hack
**Check out Integza's video here!** • Tesla Coil - Wireless ...
**For links to all parts used, view bottom of this description**
Special thanks to Lightning On Demand, for the footage of their massive 40 foot Tesla coil. Go check them out here! www.lod.org/
Plasma Channel Patreon: / plasmachannel
Plasma Channel Twitter: / channelplasma
Plasma Channel Facebook: PlasmaChanne...
Instagram: Plasma_Channel_Official
Music beginning & end:
Track: Sock it to them - Paul flint [NCS release]
Watch: • Paul Flint - Sock It T...
Music during powerlines clip:
Track: Patrick Patrikios - The Awakening
Watch: • Patrick Patrikios - Th...
Background music 1:
Track: Light Years Away - Melrose At Midnight [NCS Release]
Watch: • Light Years Away - Mel...
Background music 2
Track: NIVIRO - Flares [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • NIVIRO - Flares | Hous...
Free Download / Stream: ncs.io/FlaresYO
Background music 3:
Track: Morley and Speo - Hope [NCS]
Watch: • Morley & Speo - Hope [...
Build montage music 1:
Track: Chime - Phototropic [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Chime - Phototropic [N...
Free Download / Stream: ncs.io/PhototropicYO
Build montage music 2:
Track: ROY KNOX x Tim Beeren - Save Me (Feat. Svniivan) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • ROY KNOX x Tim Beeren ...
Free Download / Stream: ncs.io/SaveMe
Intro screen music:
Track: Summer Was Fun & Laura Brehm - Prism [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Summer Was Fun & Laura...
Free Download / Stream: ncs.io/PrismID
I am also a television actor! Follow me on IMDB
My IMDB: www.imdb.com/name/nm6578948/?r...
DO NOT attempt to repeat my demonstrations, without prior knowledge of electrical or fire safety. I do not hold responsibility or liability for damage or injury incurred by copying results seen in my videos. High voltage is not for those new to electricity!
**MAJOR PARTS USED IN THE VIDEO**
Arc Lighter (can use other ones too): amzn.to/31yC7Vy
Diode, hard to find: amzn.to/3cnsLQV
Acrylic discs: amzn.to/2S7xFKj
Nylon spacers: amzn.to/374fBoV
32 gauge magnet wire: amzn.to/3892VhP
Aluminum foil tape (counterpoise): amzn.to/2SqoL9T
Primary wire: amzn.to/376JpRQ
Capacitors: www.mouser.com/ProductDetail/...
Plasma Arc Lighter Tesla Coil DIY HOW TO

Пікірлер: 1 100

@integza 4 жыл бұрын

Tape is able to protect from corona?? I'M CALLING CHINA! It was great working with you, Jay!

@cosmicyoke 4 жыл бұрын

jokes aside, cold plasma kills viruses..

@chevysears4548 3 жыл бұрын

lmfao!!

@777immortalsoul 3 жыл бұрын

Im all Taped up over hear... Yall betta shave first!!!

@danielshalom3283 3 жыл бұрын

🙆 shalom

@jamesthomas8481 3 жыл бұрын

only if they dont try to eat it!

@tzkelley 2 жыл бұрын

I wish my grandfather were still alive. He was a high voltage transformer engineer for Westinghouse and, when he was very young, he worked for Tesla. I sure would love to pick his brain about these projects while I build them.

@hackerthangu5346 2 жыл бұрын

💫i wish u could be like him

@Randomcheem 2 жыл бұрын

Same

@mohammedimad4068 2 жыл бұрын

I ho0e you become better than him

@WhoIsJohnblack 2 жыл бұрын

I would have loved to sit with him and pick his brain! What a cool story!

@catsruleacbanonogismanbo6107 2 жыл бұрын

Wow, that is absolutely increadible.

@robertcortright 3 жыл бұрын

My favorite part is when he asked for donations by suggesting they will encourage longer, more frequent uploads. That's so true and honest! Much better than the manipulative ways other channel hosts solicit donations. 10/10 overall rating for this guy and his channel!

@mehmetinlaboratuvar7099 4 жыл бұрын

I love how cool your devices look. You show everyone science can be so cool and fun besides being important.

@PlasmaChannel 4 жыл бұрын

Thank you

@btg5975 3 жыл бұрын

@@PlasmaChannel I have built quite a few Tesla units, but i do give a Thumb's Up for your build. Regards, Engineer/Prof from India.

@danielshalom3283 3 жыл бұрын

@@PlasmaChannel shalom. Channel Mudiffossil university 🗣️😨🤗😇🗣🎶

@declanmagill7624 3 жыл бұрын

@@PlasmaChannel Hello sir! I have a really strong interest in building this style of coil for my dad, who is an electrician. I think it would be a great surprise for him. I was wondering if you could talk a little bit more about how you got the wiring done on the arc lighter at 3:30, and maybe a little bit about the specs of the insulation you 3D printed. Thanks, Declan.

@Raycast_ 3 жыл бұрын

Wait, is science important?!?!

@davidh.4649 3 жыл бұрын

This one is very interesting. The arc lighter is itself a tesla coil. Instead of a spark gap it uses a transistor with a DC power input (the rechargeable battery in the lighter) to form a high frequency self oscillating circuit to drive the primary coil of the transformer in the lighter. That results in high voltage high frequency AC on the output of the plasma lighter. This is why the plasma lighter could be used for the power supply for the lightning tower build (Cockroft-Walton voltage multiplier). Now, since the output of the arc lighter is AC, you have to include the high voltage diode in your tesla coil primary circuit as a half wave rectifier because you want to charge the capacitor with a high DC voltage. So essentially the plasma lighter high voltage AC output gets rectified by the high voltage diode and charges your high voltage capacitor every half cycle. Once the capacitor voltage gets high enough to break down the spark gap, a spark jumps the gap and the gap becomes very conductive (almost like the gap was shorted). The stored voltage in the capacitor can now discharge across the spark gap and through the tesla coil primary coil. As that stored energy is suddenly dumped across your tesla coil primary, it results in an even higher voltage on the tesla coil secondary. Voila! A tesla coil powering a tesla coil! Very nice!

@natecas0865 2 ай бұрын

Does this mean that we could achieve double the power with a FULL BRIDGE RECTIFIER (Cue Electroboom's rectifier man)

@Electronic4081 4 жыл бұрын

Beautiful build! There is just something so satisfying about tiny Tesla coils! Great job!

@bcikablam3578 4 жыл бұрын

Epic, easy to understand and smoothly edited video, as always!

@nigel-matthews 4 жыл бұрын

Awesome video! Really looking forward to this build. That was a pretty cool perk for being a patron too - thanks Jay!

@PlasmaChannel 4 жыл бұрын

HI Nigel, I'm glad the file uploaded correctly. I'm still learning the intricacies of Patreon! Thanks for your support.

@timovneerden 4 жыл бұрын

It looks so clean and smooth, it’s beautiful!

@Allahbkool 3 жыл бұрын

Kinda like him

@erygion 4 жыл бұрын

I've been with this channel for years Jay and I'm never disappointed. I really ought to make one of these someday as well as that lightning detector circuit, so cool. Thank you for another great video.

@PlasmaChannel 4 жыл бұрын

I really appreciate you being with me as I’ve grown. I’ve put out some bad videos, and I’ve put out some good ones. I always strive for the best I can do, knowing I have the support of people like you. If this is shareworthy, share the video!

@erygion 4 жыл бұрын

@@PlasmaChannel Thank you, they're all good in my opinion. I'll be sure to share your channel whenever possible. Thank you for the comments, made my morning.

@synthlord2368 4 жыл бұрын

Glad to see you back Jay! Another great video!

@omkr0122 4 жыл бұрын

"As a former Tesla trooper, I am very happy with this video!" - Lt. Surge, 7th Electric Pokemon Army.

@CrazyNerdInventor 4 жыл бұрын

9:04 I swear I heard the minecraft 'oof'

@kenshiromilesvt.7037 4 жыл бұрын

Yep!!

@samanthaoneeshie1817 4 жыл бұрын

*rbolox oof

@jamesmachirmusic5311 4 жыл бұрын

@@CrazyNerdInventor mmmm, the minecraft oof turns me on

@_thisnameistaken 4 жыл бұрын

Yeah. AW

@KILLA219 3 жыл бұрын

Lol

@TheCrazzyToobinator 3 жыл бұрын

This is a pretty neat project, I love how simple these are to build in fact I built something not much bigger over a year ago but I used a small flyback transformer from a 5" tv set and just a simple mosfet driver to drive the trasnformer. I have also learned that you can use the inverter transformers from old LCD TV's as well which are not hard to come across these days. The arcs are about the same in size but have more thickness to them and don't dare to touch it lol. I am hoping to tweak the tuning a bit more in the future to hopefully get larger arcs. To power it I am using 3 18650's in series to get around 12V and what is really fun about something like this is how the principle of function pretty much stays the same once you have a HV source to work with.

@michaelmitchell8218 4 жыл бұрын

Great to see you back. Good little project there. This is one of the good things about the internet. Is channels like this. Always love your work.

@PlasmaChannel 4 жыл бұрын

Michael, thank you for such nice words. I appreciate it.

@donaldarsenault3878 3 жыл бұрын

"the ultimate arc lighter hack" styropyro: hold my beer

@ervinojaste1172 3 жыл бұрын

Styropyro "it's pointless if it can not kill me. Frist we need 10 microwawe oven transformers..."

@Texas_bikes66 3 жыл бұрын

@@ervinojaste1172 yes

@skelemander2624 3 жыл бұрын

@@ervinojaste1172 styropyro is amazing

@TheWorstBridger 2 жыл бұрын

@@ervinojaste1172 Styropyro probably made his channel to see how fast he could die

@masternovahlavoie998 3 жыл бұрын

When you are hit in the head by the box delivery... I had to pause the video because I was laughing so hard. Well done! 👏🏼👏🏼👏🏼

@robertcortright 3 жыл бұрын

I looked away for a split second just as that happened! I could tell by the sound I missed something good, but kept playing. Now I need to go back and check it out...

@th3n33f 3 жыл бұрын

I definitely want to build this one day when I have all the parts

@donnadeering4863 3 жыл бұрын

Looks, brains, and a people person. Great show.

@thefullercrew 4 жыл бұрын

Great revision to the original bug zapper one! Thoroughly enjoyed building the original so am definitely going to give this one a go!

@piotro1201 Жыл бұрын

What copasitors do you buy

@justinbanks2380 4 жыл бұрын

Another great, clean design for a coil!!! It's like Christmas every time you drop a video. I can't ever hit play fast enough! Going back for a second watch! Did you find any preference of one lighter vs another? Or are they all comparable?

@PlasmaChannel 4 жыл бұрын

Thank you so much! That means a lot!

@samns3626 4 жыл бұрын

Cool Video , Its Really Informative Im really a great fan of yours LOVE U :)

@PlasmaChannel 4 жыл бұрын

Thank you

@greggrimsley5337 3 жыл бұрын

Literally, a work of art.

@christiancardin5273 4 жыл бұрын

Need more videos like this 💯 good job man 🙏

@MrBusta-zj1ec 4 жыл бұрын

This guy is going to be the Nikola Tesla of 21st century !

@PlasmaChannel 4 жыл бұрын

I can only hope!

@MarkMarconi 4 жыл бұрын

Hahah

@ashers_workshop 3 жыл бұрын

You mean like powering the whole world with wireless electricity?!

@joseinfante5054 3 жыл бұрын

@@PlasmaChannel You are as far away as 100 years. I mean this is just a toy, like pulling a rabbit out of the hat.

@f.lancepenman6672 3 жыл бұрын

Like your projects! What would happen if I used a 4" diameter hollow copper sphere I have? How did you determine the # of turns of primary and secondary wire to determine resonance? Thanks, Great channel!

@Trinitrophenylmethylnitramines 4 жыл бұрын

This channel deserves more views

@BaldurKhr 3 жыл бұрын

This isn't science. This is ART ! Love your videos!

@oatmealcereal. Жыл бұрын

It's a mix of both

@power-max 4 жыл бұрын

Some improvement ideas: * remove the bottom conductor, it is acting a short-circuited L3 coil, and robbing the secondary of power. * tune the primary to closer match the secondary. Not sure how 3nF and that small primary match up to the secondary, my guess is that the coil operates at 2MHz. * try adding more turns of thinner wire. For a coil this size I would use 30AWG or as thin as you can tolerate. The current is low anyway so more turns will result in higher output voltages. * Fatten the secondary a bit so each turn has more inductance and the larger diameter means better coupling between primary and secondary. More important with SSTC designs though.

@PlasmaChannel 4 жыл бұрын

Hi PM, thanks for the suggestions. The ground connection is needed to ensure proper flow through ground and air. Without a ground / counterpoise, the high voltage ground will jump to the primary circuit and burn insulation. Also, with no ground connection, the voltage output at the topload is decreased. Also, the two circuits are roughly tuned. The primary is just under 2mHz, while the secondary is 1mHz. They are at nodal frequencies and this coil is optimized for it's size. For the fatter secondary, those are usually reccommended for higher powers. This little guy is less than 15 watts!

@power-max 4 жыл бұрын

@@PlasmaChannel Yup I'm aware, check out my most recent audio modulated SSTC! :) Not saying to get rid of ground, just remove the large conductive plane, since the magnetic flux induces a current in it and it creates an opposing magnetic field. Check this video out to see what I mean: kzfaq.info/get/bejne/qat-mseEq57UoHU.html Using a higher resistance ground plane will help greatly reduce the eddy currents. Or if the electric shielding isn't needed, then just have a ground lug and make sure to connect the ground. In your case, It's probably not affecting the output too bad given it's distance from the primary, but the eddy-currents works like electrical "friction" and that always that works against you. Great vid BTW.

@DarkDragonEgg 4 жыл бұрын

It really needs an adapter so you can olay music with it

@power-max 4 жыл бұрын

@@DarkDragonEgg This Tesla Coil does not have the capability for audio modulation. There is too much noise and distortion introduced by the crude spark gap design.

@3amali1 4 жыл бұрын

Jay, why the primary coil is at the bottom of the secondary? I know almost every Tesla coil does it this way probably because first design by Tesla was that way to avoid passing the power source long distance close to the secondary coil and risk discharging back to the power source (which can be avoided with an ugly twist of wire).. BUT if the primary coil goes in the middle of the secondary you will have a lot more coupling of energy between the coils, and this gives you more space to widen the electric tape insulator to cover almost all the secondary coil to void corona so there will be no need for the 3D printed large gap (which reduces the power transfer of course). Might be an interesting and simple test which makes your modified (E-Tesla) coil more powerful :)

@WardenclyffeResearch 4 жыл бұрын

The primary coil is on the side where the secondary is grounded so to minimize the voltage difference between the two and thus reduce the chance of arcing. You can put the primary in the middle, but then you'll need to make a ground connection in the middle too and you'll have both ends of the coil at half the "normal" potential Increasing coupling does not necessarily increase performance. That very much depends on the resonance frequency of the secondary + top-load combination and the resonance frequency of the primary coil and capacitors. In this video, no attention is given to that aspect, but it should, as that is the most important factor determining the performance of the coil. Then, when everything is well tuned, the best results are actually obtained with a coil that is not coupled at all. Tesla called that the "extra coil".

@garyvanscyoc4320 Жыл бұрын

I am fascinated by this concept as a transformer of power but I can't quite comprehend any practical use as such . If a practical application could be disclosed it may help me to understand the value of such a toy. How would this apply to household use on a large scale ?

@toqeerahmed3016 4 жыл бұрын

as always beautiful work

@kaylavanderpool5024 4 жыл бұрын

This is the video I have been praying for. Going to build this ASAP! Thank you so much :)

@PlasmaChannel 4 жыл бұрын

Hi Kayla, glad you are inspired! If you need help don’t hesitate to ask. Two things - 1) the lighter easily breaks. Make sure you’re never touching a spark from the Tesla coil while also touching the lighter or the on off switch. 2) don’t run the coil more than 8-10 seconds at a time - it will break the lighter quickly if you do! Make sure the spark gap is no more than a mm, and you’re good to go!

@kaylavanderpool5024 4 жыл бұрын

@@PlasmaChannel Thanks so much!

@darrennixon8765 4 жыл бұрын

You hacked my ocd by spilling all that tea

@AverageJoe2020 4 жыл бұрын

Was a nice touch wasn't it?

@InmanAerospace 3 жыл бұрын

Jay: tape protects from corona. Anti mask people: makes mask from tape and can’t breathe because it is stuck to their face Also anti mask people: face masks are gonna kill us!

@KarlA-vk4kn 4 жыл бұрын

Fantastic video and project Jay. Well built and looks awesome 😀👏👏

@PlasmaChannel 4 жыл бұрын

Thank you!

@FilosophicalPharmer Жыл бұрын

Greatest thing about this video for me is seeing Jay spill his tea when he is thinking of something else. “Great minds spill alike.”

@aplacetoimproveteslacoilin3721 Жыл бұрын

Arc lighter powered Tesla coil is a device that uses an arc lighter to create a spark that powers the Tesla coil. The arc lighter is connected to the primary winding of the Tesla coil, and when the arc is struck, it provides power to the coil. This allows the Tesla coil to create a high-voltage discharge, which can be used for various purposes such as lighting cigarettes or creating an electric arc. The arc lighter powered Tesla coil is a simple and easy-to-build device that can be used for many different purposes. It is a great project for anyone who is interested in electronics or physics, and it can be used to teach basic concepts about electricity and magnetism. The Tesla coil can also be used for demonstrations or experiments, and it can be modified to create different effects.

@Slowly_Going_Mad 4 жыл бұрын

This was a great video. Keep up the classy awesomeness.

@laytonpratt 4 жыл бұрын

Professional as ever. Love your videos Jay.

@PlasmaChannel 4 жыл бұрын

Thank you very much, Layton!

@jonnywilliams35 4 жыл бұрын

I have never seen someone try so hard to look confident..... just chill dude

@1123pawel 4 жыл бұрын

Thank you Integza for introducing me to this wonderful channel!

@PlasmaChannel 4 жыл бұрын

Joel is a friend now!

@1123pawel 4 жыл бұрын

@@PlasmaChannel That's great! Looking forward to seeing you two working together on future projects. ;)

@DrRSPMD2010 3 жыл бұрын

That's awesome, thank you so much!

@erinschlameus3628 11 ай бұрын

I absolutely love it. I want to build one as soon as I have Tomy

@thirdplanetman9468 3 жыл бұрын

You are litterally the best !!

@mjv8493 3 жыл бұрын

I hope I can have one small Tesla coil as you make someday. Thanks for the video.

@sciencefusion5352 3 жыл бұрын

Tour videos are really awesome 👌 love your videos ❤️

@4thorder 2 жыл бұрын

Great Video! Very informative. Thanks for sharing.

@rodwolverine9393 3 жыл бұрын

The box is hilarious, if your gonna hold a mug you should hold an oversize one. i was captivated, good job.

@treasuretotrash2067 4 жыл бұрын

Ok dude, the fact that your channel is as small as it is is genuinely unfair. The sheer quality and effort that is shown in your work NEEDS more recognition. Your projects are far better looking and work way better than any others I have seen on KZfaq. I know this because I have been watching this channel for like a year and a half. It was an instant subscribe for me from the first video I saw. In fact, the high voltage flyback transformer video is my favorite. And i ended up actually making one. Yes for those who are wondering, it did work. Good job dude 👍👍👍. Ps: on mobile so spelling and grammar may sound weird.

@PlasmaChannel 4 жыл бұрын

TRE, thank you so much. That means a lot to me. I put a tremendous amount of effort into every video, and hope that the world sees my passion as I do. You can help the cause by sharing this video on social media / reddit. Cheers!

@treasuretotrash2067 4 жыл бұрын

@@PlasmaChannel Definatly. Its definatly the least one could do. :D

@MetalKnifePunk 3 жыл бұрын

I will have to try this eventually! I have 2 of your old style with a few modifications of my own and i love them. I have people ask to see them all the time and they are great when my friends bring there kids over. I have been wanting a bit more power though for a while.

@MetalKnifePunk 3 жыл бұрын

Also if i added a couple capacitors would that give it a little more power aswell

@Cybergrip1 4 жыл бұрын

That package delivery system was precious...got a really good laugh out of that. Good job...thanks.

@PlasmaChannel 4 жыл бұрын

Glad you enjoyed it. Cheeers!

@fuhkoffandie 3 жыл бұрын

I have a lighter I got for Christmas a couple years back, the longest lasting cigarette lighter I've ever had. It lasted well over a year. Anyway, it's still works, although it burned the electrodes so badly, the plasma X, is now a plasma dot. So this is actually a perfect project for a lighter I just didn't have the heart to throw out because it was too darn cool. I want to thank you so much for dreaming this one up, this is a good one. Lifetime sub for sure.😁👍💯

@lucassteen4050 3 жыл бұрын

I need to build one of these in the future!!

@Chrissy4605 3 жыл бұрын

Like your presentation. You are easy to listen to and don't take yourself too seriously!!!!

@PlasmaChannel 3 жыл бұрын

Thanks!

@xxdxx3776 3 жыл бұрын

Dude you are the most interesting science channel, subscribed already.

@PlasmaChannel 3 жыл бұрын

That means a lot to me, really. Thank you! New viddy coming out next Wednesday!

@Justin-dv7ul 4 жыл бұрын

new intro is awesome!

@rexleehe7633 4 жыл бұрын

Probably one of my favourite channels

@PlasmaChannel 4 жыл бұрын

Thank you so much! Feel free to share this video on social media.

@gogo311 4 жыл бұрын

*spills tea casually*

@brentrubin 4 жыл бұрын

Awesome video man!

@melissarflores5749 2 жыл бұрын

phenomenal!!!!!!!great science project wow

@fabio620 3 жыл бұрын

Your friend is Portuguese!!!! He shipped the 3d printed parts in a CTT box (portuguese mail courrier) . Hello from Portugal and congrats for a very instructive channel :)

@PlasmaChannel 3 жыл бұрын

Yes, he is from Oporto. Cool! Greetings from USA, the country currently on fire.

@treasuretotrash2067 3 жыл бұрын

I'm actually going to build a motorized bicycle with a big solid state tesla coil on the back by the exhaust pipe. Its going to be so obnoxious lol but so fun and it will easily be the coolest thing I will have made in my childhood. Thanks for all the inspiration over the years Jay!

@basuy 4 жыл бұрын

love all your videos man😊

@stephenadams2594 3 жыл бұрын

Very cool video thank you for making it I love Tesla he was a real genius stay cool and stay safe my friend

@weldthefuture9833 3 жыл бұрын

Thank you jay nice tutorial..

@augustusdeg6705 3 жыл бұрын

thanks to you jay..

@davidhughes4728 Жыл бұрын

I love your video man keep up the good work

@huibvanderveur3015 4 жыл бұрын

Really liked that box transition

@PlasmaChannel 4 жыл бұрын

Thank you. My girlfriend has never been so happy to throw something at my face haha

@huibvanderveur3015 4 жыл бұрын

@@PlasmaChannel Just laughed very hard at this one haha

@jasonrohman6311 10 ай бұрын

I don't have all this stuff down yet of the electrical components that go into these builds but I do know the basics in theoretics

@abhishekraman4751 4 жыл бұрын

love you brother keep glowing like a star

@alexellis5352 3 жыл бұрын

That’s really awesome! Great work!

@PlasmaChannel 3 жыл бұрын

Thank you! Cheers!

@subzerofusion18 4 жыл бұрын

I love when you make tesla coils!

@sa8die 4 жыл бұрын

this is great, thanks for telling/showing us,.

@sa8die 4 жыл бұрын

and they are not polarized, so they are great caps../

@rocklobster1976 3 жыл бұрын

That's awesome. Thanks so much. I have an arc lighter sitting right here.

@PlasmaChannel 3 жыл бұрын

Awesome! Make sure you don’t touch anything but the on off button, when turning it on and off. Also, don’t run it more then 10 seconds at a time.

@juancarrero1119 9 ай бұрын

If i remember right the CPL has a 3D printer even classes on how to operate the printer gotta get in line though its cool you were fun to watch thanks .

@kirkgreenman1386 26 күн бұрын

Was really cool, I don’t have an Arc Lighter.. It would be fun to build a big one for the living room.

@grogerwilliams6459 4 жыл бұрын

Really beautiful and excellent work. Hope the 3-D printer guy didn't cause any permanent damage! Love it

@PlasmaChannel 4 жыл бұрын

Haha thank you! This coil is one of my favorite builds

@zagnut48219 3 жыл бұрын

I found a channel dedicated to plasma! SUBSCRIBED!

@PlasmaChannel 3 жыл бұрын

Welcome to the Plasma Fam my man! I have a new video coming out tomorrow.

@coolnegative 4 жыл бұрын

This is so cool!

@maximmortal3170 3 жыл бұрын

Awesome video!

@gauravarora2738 2 жыл бұрын

Oh man..m in love with you dude.. U R LEGIT..

@fridtjofschussler6434 3 жыл бұрын

Thanks... nice idea to realize a Tesla coil!

@bakupcpu 4 жыл бұрын

Great build love it!

@PlasmaChannel 4 жыл бұрын

Thanks!

@RobertBranch-FL 4 жыл бұрын

Awesome build. I am going to have to purchase a couple arc lighters now :)

@PlasmaChannel 4 жыл бұрын

Arc lighters are awesome!

@mjv8493 3 жыл бұрын

Amazingly cool.

@naiakaseiasvili8631 3 жыл бұрын

Oh my god. Very, very coll project.

@ElectricUniverseEyes 4 жыл бұрын

I LOVE your Lighter Tesla Coil! I want one!

@PlasmaChannel 4 жыл бұрын

Thanks! I am considering making kits soon!

@ElectricUniverseEyes 4 жыл бұрын

Plasma Channel I would buy one!! I’ve failed so many times trying to build my own.

@rmschindler144 Ай бұрын

this is all *so cool*

@8ob333 2 жыл бұрын

the power of the sun in the palm of my hand

@lightbulbgonewild3205 2 жыл бұрын

Nice improvement from the previous design =)

@manuellopes7144 3 жыл бұрын

your amazing its people like you that are going to power the new earth follow your heart

@tarun.starboy 4 жыл бұрын

A few days back, maybe a week ago I visited your channel to see if I missed a notification because it's been a while since you posted a video. And today I saw your feed that some people didn't get notified. I checked my notification list, and there it was. But somehow I missed that this time ☹️ . The production quality of this episode is SUPERB😍😍😍 . 9:03 One of my favourite moments Couldn't stop laughing 😆😆😆😆😆😆😆😆😆😆

@PlasmaChannel 4 жыл бұрын

Hey Tarun, glad you enjoyed!