DIY Accordion Repair (Stuck Key)

Рет қаралды 179,167

8 жыл бұрын

A button/key was stuck on the accordion.
- the cover was removed (held by 2 screws);
- the shaft was pulled to the right to release the first button;
- the first button was taken out;
- the spring holder shaft was removed;
- the broken spring was replaced with a safety pin;
- the spring holder shaft was re-inserted;
- cleaning
- the button was reintroduced;
- the button holder shaft was pushed to the left (check shaft/hole alignment!)
- all keys were verified (adjustments if needed)
- the cover was mounted back;
------------------------------
Music:
Ambiment - The Ambient by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

Пікірлер: 76

@KennyCnotG 5 жыл бұрын

Just a warning- you should not vacuum out through the air holes covered by the pallet from the key, some vacuums produce much more pressure than the reeds & valves (on the other side of the holes) are designed to take in use, which can lead to bending or cracking of either and a reed or valve is much harder to fix or replace than a key.

@Ambsdr723 Жыл бұрын

You should (one should) also not lay an Accordeon on its keys like that. 😬

@38scsharma 5 жыл бұрын

Very nice video - use of a safety pin as a 'spring' is very nice idea. However I have used a a small paper pin inserted in the space in the treble wooden board , twisted it downward at about 5 o'clock position and put in a very small rubber band between the treble shaft and the pin - and it worked fine. Give as many twists to the rubber band as it becomes almost similar to the 'bounce' of the original spring. Have tried it a lot successfully on my 12 bass Pietro piano accordion( way back in 1950s- as a teenager accordion player) when the springs cracked and spindle could not be taken out. Caution , the rubber bands tend to break after some time, you may keep replacing when required. However replacing with metal spring or a safety pin is a better option as explained in the video . Warm Regards.

@disastroustitanic8139 Жыл бұрын

Thanks this maybe helpful for me in the future that I bought an old 1940s-1950s acordian of one stuck key.

@stranraerwal 6 жыл бұрын

parquet-floor-ideal for such difficult repairs !

@krokodil191 4 жыл бұрын

That is laminate floor, not parquet...:)

@wouter9355 8 жыл бұрын

youtube masterpiece! loved watching it... now I'm gonna fix my accordeon : )

@wouter9355 8 жыл бұрын

worked like a charm! thanks!

@Steve-xp6zo 7 жыл бұрын

That accordion is gorgeous.

@furulevi 7 жыл бұрын

it's old...it has at least 50 years

@stranraerwal 6 жыл бұрын

Stephen Barr: what's so gorgeous about it ? It`s a rather ordinary run of the mill piece.Have you ever seen a really gorgeous Accordeon made in Italy ?

@atlaseca 5 жыл бұрын

Any instrument is gourguse

@alexandreantonov3715 5 жыл бұрын

if you push the axle by 1cm by pushing it with another axle and remove it with a screwdriver, it would be much easier and would not bend the axle.

@edwardc7462 8 жыл бұрын

Very good but remember to number the keys so you know the order they are put back in , and be careful when you pull the rod out as the keys are often Spring loaded and will pop out.

@MartinDxt 7 жыл бұрын

yeah a customer once made that with the mechanic (left hand side) the entirety over few billion possible combinations nothing to worry about really :|

@edwardc7462 7 жыл бұрын

MartinDxt Had a e soprani a few years ago that developed sticky notes on the bass side, The accordion repairer used a lubricant spray in the mechanism and pressed the buttons until the buttons were free and able to move without sticking, Had no trouble with it after that

@MartinDxt 7 жыл бұрын

Edward c LOL that's not how you should do that but if it works ok fine lubricant spray may still do harm to some other stuff in the mechanism if it was done purely out of metal sure why not but there is felt, wax, 2-3 glues, rubber, wood, letter, celluloid, plastic, and at least 2-3 different metals and every manufacturer has slightly different materials but if it worked good for you i hope he's been careful in his lubricant choice

@gustavgnoettgen 4 жыл бұрын

I have the exact same model!

@nancyleekellyproductions1616 7 жыл бұрын

OH YOU BET HERBIE HANCOCK,, YOU ARE THE BEST IN JAZZ AND I PLAY JUST THE WAY YOU SPEAK IT ,, TALK IT,, AND COMPOSE IT,,, I'M IN ALL THE WAY AND WHEN I'M WALKING OUT OF THE STUDIO,,, I'LL BE "IN AND OUT" AGAIN AND AGAIN! HAHAHA

@furulevi 7 жыл бұрын

@user-sx6sv1dk5z Ай бұрын

ремонт на полу это круто!

@KSTsonic 6 жыл бұрын

Cool music

@soroushshafiee935 5 жыл бұрын

sounds like bach

@F8LXEPSHN 8 жыл бұрын

You're not gonna play a tune for us???? Well done.

@segurosincero4057 3 жыл бұрын

Splendid work. Thanks for sharing. I have a question. If the cloth comes loose what type of glue do you use to reattach it?

@furulevi 3 жыл бұрын

Cloth? Where? Probably a rubber based adhesive (prenandez)

@segurosincero4057 3 жыл бұрын

@@furulevi thank you very kindly for writing. I’m looking at buying an old Yamaha model that’s similar to yours. The metal grate as a cloth liner on the inside and it’s starting to become detached from the metal. Perhaps the cloth superfluous.

@martincerny2004 8 жыл бұрын

I've also got an Hohner Student IV but my base button is stuck. Hopefully I find out a way to repair it.

@shantaramshirsat9652 5 жыл бұрын

Ydf

@atanuresen2287 4 жыл бұрын

@@shantaramshirsat9652 harika bir görsel teşekkür ederim

@elmercampos5405 3 жыл бұрын

Is there a way to soften a diatonic accordion buttons

@monikawojdak3037 3 жыл бұрын

Wird des Akkordeon gestimmt kann man selber nen Akkordeon stimmen.Ich habe auch nen kleines Akkordeon was verstimmt ist.Des ist ja interessant.Super genial.👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@ubiratancs 5 жыл бұрын

EXCELLENT

@deweydodo6691 5 жыл бұрын

thought he was going to bust the cover at first prying it over .

@furulevi 5 жыл бұрын

0:22 :D

@Listekikwiatek 8 күн бұрын

Nie udało mi się wyciągnąć druta 😢 mam Weltmeister i podobno wyciąga się on od połowy klawiatury więc przepychanie go z drugie strony nie wchodzi w rachubę.

@watcher1544 4 жыл бұрын

This is actually a stuck KEY. Buttons are on the Bass side.

@furulevi 4 жыл бұрын

You're right, thanks!

@atlaseca 5 жыл бұрын

Nice vid but is that thw only way?

@furulevi 5 жыл бұрын

I don't know, I did it as I could, I'm not a professional...

@ismaelcasillasagosto 3 жыл бұрын

It Is a mistake to bend the key arm. Bending can cause air leaks. The problem is the tension spring, not the key arm.The safety pin can do the job, but the head has to be cut too. Then it can be adjusted applying more o less pressure.

@paolomercurio7625 4 жыл бұрын

Buon giorno ò visto il vostro video dove riparate un tasto della fisarmonica, anchio vorrei sostituire alcuni tasti ( palette ) mà il perno che tiene le palette non à alcun dado da svitare inoltre e messo molto all'interno ed è imprendibile .può darmi un aiuto potrei cambiare l'asta passante? grazie.

@lifeddogg21 5 жыл бұрын

Dont look like a stuck button to me but a stuck key. Maybe

@margaretphillips2043 3 жыл бұрын

I hav a parrot accordion an one of my key is broke how much to get it repaired

@furulevi 3 жыл бұрын

I don't know... try to do it yourself.

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Ese vídeo es de acordeon diferente

@wetbadger2174 Жыл бұрын

Now my bass key is pressed against the left side, even though the shaft is going through the hole in the right spot :(

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Pará la gente que no sabe y camara más lenta

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Ay de otras si saven pongalas

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Ay estás limpiando

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Cuando se sale y es grande y en el Medio

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Esa tecla no todas llevan ese resolte

@ismaelcasillasagosto 3 жыл бұрын

The BEST way to do that job is on a table...not the floor. Vaccum can't be done neither, it can damage the reed Valves.

@furulevi 3 жыл бұрын

This accordion is working just fine since this repair...

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Se engancha por fuera

@rudolphwouters9499 4 жыл бұрын

Brandenburg Concerto Bach by who please?

@furulevi 4 жыл бұрын

Johann Sebastian Bach

@rudolphwouters9499 4 жыл бұрын

@@furulevi Yeah thanks, I meant to say which orchestra and conductor.

@rudolphwouters9499 4 жыл бұрын

I really appreciate this rendition

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Hola ninguno pone la tecla de armedio

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Que tiene solo un eje

@dsprojects136 5 жыл бұрын

When all you have is a safety pin, the whole world looks like a diaper. You should apologize to that instrument.

@furulevi 5 жыл бұрын

The instrument is still working fine :))

@earnestlycontendingforthef5332 5 жыл бұрын

@@furulevi Bravo! What a clever idea and certainly looks a lot, lot, stronger, than the old feeble looking stringy original. I have bought two accordions and need to replace some reeds, will the new ones need tuning?

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Está solo resotes

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Pero la tecla

@genovevadelcarmenvegatorre8365 2 жыл бұрын

Pero no está poniendo la tecla

@genovevadelcarmenvegatorre8365 2 жыл бұрын

De palillo