DIY Adjustable Sliding Push Block Table Saw

Рет қаралды 74,525

4 жыл бұрын

#plywoodworking #pushblock #tablesaw
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking
/ 479435482886643
/ plywoodworking
DIY Adjustable Slider Push Block for the Table Saw Fence. I combine my fence with push block so this push block more stabile and easy for use. This sliding Block has a adjustable Hight and replaceable Support Width. I made a hand push block to use the table saw safely.
this is really help me for working and I am very pleased with the results and would recommend making one yourself
Subscribe and leave comment on bottom if there is any question or less obvious please leave it in comment field.
Hope you like it and don't forget to like, share and SUBSCRIBE...
Thanks
---------------------------------------------------------------------------------------------------------
Song: "Sappheiros - Embrace [Chill]" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/Sappheiros-Embrace
--------------------------------------------------------------------------------------------------

Пікірлер: 75

@marcosreis5879 11 ай бұрын

Thanks for share this excelent skill

@jamesnasmith984 Жыл бұрын

The use of solid, 3D diagrams makes is easy to clearly visualize each component.

@plywoodworking Жыл бұрын

Thank you very much 👍👍

@DobermanDave531 9 ай бұрын

Superb as usual 😄

@plywoodworking 9 ай бұрын

thank you very much!! 😊

@angelamcdonagh1026 3 жыл бұрын

Brilliant what a clever guy, and you can listen to him ( he doesn’t make stupid faces and ramble on like some ) he explains everything clearly. Excellent!

@plywoodworking 3 жыл бұрын

Thank you very much!

@anangwidiasmara7477 3 жыл бұрын

Mantabs 👍👍👍👍 kreatif dan inovatif,ide brilian mas tetap semangat dlm berkreasi 🙏🙏🙏⭐⭐⭐

@plywoodworking 3 жыл бұрын

maksih banyak mas

@sawdust58 4 жыл бұрын

Thanks for sharing. Good video easy to follow instructions.

@plywoodworking 4 жыл бұрын

Your welcome hope can give inspired

@MyVideoCollection 2 жыл бұрын

Tip: Before inserting and gluing the bolts into the stock, you should have threaded nuts onto the bolts. You can then restore the threads by removing the nuts after cutting the bolt heads off

@plywoodworking 2 жыл бұрын

thank you very much!!!

@markielinhart 2 жыл бұрын

Brilliant! 👏🌹🇦🇺✌️

@plywoodworking 2 жыл бұрын

Thank you very much!👍😊👍

@sgcdialler 4 жыл бұрын

Just a tip, if you're going to countersink with spade bits, drill them before you drill the through-hole. That keeps your center more accurately.

@plywoodworking 4 жыл бұрын

Thank you, that good idea

@troygagnon5914 3 жыл бұрын

You are truly amazing with your tutorials!

@plywoodworking 3 жыл бұрын

Thank you so much!

@IEnjoyCreatingVideos 4 жыл бұрын

Nice work on the jig Friend! Thanks for sharing the video with us.👌👍😎JP

@plywoodworking 4 жыл бұрын

Thank you

@IEnjoyCreatingVideos 4 жыл бұрын

Your very welcome Friend! Have a great week! 😎

@norbertgallice7769 4 жыл бұрын

Bonjour, très beau travail et très bonne idée. Merci pour cette vidéo...Norbert (France)

@plywoodworking 4 жыл бұрын

thank you hope can give inspired

@JorgeManganell 4 жыл бұрын

Me lo haré, me ha gustado mucho el trabajo.

@plywoodworking 4 жыл бұрын

thank you, hope can give inspired!

@luisbautista9594 4 жыл бұрын

Excelente ayuda muchas gracias

@plywoodworking 4 жыл бұрын

Thank you very much

@johnmav8309 4 жыл бұрын

Brilliant!!!

@plywoodworking 4 жыл бұрын

Thank you

@mp.maker.82 4 жыл бұрын

Molto bello!!!!

@plywoodworking 4 жыл бұрын

Thank you

@shahbazkh2885 4 жыл бұрын

Wow.. very nice

@plywoodworking 4 жыл бұрын

Thank you

@fernandotoromuebles 4 жыл бұрын

Muy bueno

@plywoodworking 4 жыл бұрын

Thank you so much

@ISIMPLYBUILTIT 4 жыл бұрын

Nice. I saw this on DIY Thosa's Channel too.

@plywoodworking 4 жыл бұрын

Yes, you right almost like thosa channel and patrick, but i modification make more easy and adjustable for tail

@juliusganot1321 2 жыл бұрын

great......⭐⭐⭐⭐⭐

@plywoodworking 2 жыл бұрын

thank you

@kratingdieng 4 жыл бұрын

Mening pisan rek. Guanteng pol push blocknya kakak om. Oh ternyata besi semacam baut dilekatin ke HMR pake semacam lem G gitu sdh kuat ya kakak om? Reaksi kimianya ampe berasap kemedul. Suka sama project safety macam gini kakak. Safety glove dipakek, safety push block ditambahkan.. sebuah ikhtiar menjaga nikmat kesehatan dan keselamatan. Lanjutken kakak..

@plywoodworking 4 жыл бұрын

Makasih banyak mas, hmr super kuat mas jauh drpd Mdf, wah perhatian sekali detailya ampe liat reaksi lem G am HMR mantap👍, cm pake lem G aj udh super kuat mas klo HMR, table saw baru klo gk aman bahaya mas mkya buat alat bantu ini jdiya presisi, kuat tp ttp aman dipake. Smoga bermanfaat & memberikan inspirasi👍👍

@seanjr7899 3 жыл бұрын

Angkat aku jadi muridmu suhu hehehe

@plywoodworking 3 жыл бұрын

siap mas

@Richard-dh8ny 2 жыл бұрын

Excellent Safety Tool! Thanks for sharing. Can you tell us what HMR stands for? I've never seen this green engineered material so it may not be available in US or may go by a different name.

@plywoodworking 2 жыл бұрын

thank you very much!!!

@patricklickel 4 жыл бұрын

Good idea please plan

@plywoodworking 4 жыл бұрын

thank you, now i still make plan i will give link if ready for download

@plywoodworking 4 жыл бұрын

you can download plan on description

@MJM_spot 4 жыл бұрын

gawe mejo kerjo kang, sing serba guna sing ono ragume sisan gawe cekelan

@plywoodworking 4 жыл бұрын

siap dikondisikan mas

@guidoanglisani346 4 жыл бұрын

Ciao, come si chiama il materiale che usi e dove si può trovare. Grazie

@plywoodworking 4 жыл бұрын

This material call HMR (High Mousture Material) that next level from MDF more solid and waterprof. this is new material on my country but i dont know in your country

@user-sd6th4ob5k 4 жыл бұрын

ここに登場した薄緑色の材料は何ですか？粉体は人体には影響しないですか？ベニヤ板やMDF材等の合板と比較しての人体への影響と材料としての長短はどうですか？どなたか教えて下さい。

@plywoodworking 4 жыл бұрын

this material call HMR, this is partical board but have exopy that why more solid, flat and waterproff. ifor contact on skin all okay but i recomended use respirator mask or give blower on workshop. But i really like this material very easy use, precision, solid and super flat that why i use this for make jig. i think all dust not good healty

@ffff1758 4 жыл бұрын

All your projects are extremely simple and well explained! Great! But, you're lucky to have HMR, it's not available here in Argentina, just plain MDF... Even plywood is a shit here, very poor quality... I'll see what I can get to build one of your jigs Keep uploading videos Regards

@plywoodworking 4 жыл бұрын

yes, first i start this channel use plywood but the quality suck not flat and bend, i cahne with MDF but not durable and finally i found HMR this is good material reallysolid, flaten and waterproof

@campriole5410 4 жыл бұрын

Where can you buy HMR in the US?

@plywoodworking 4 жыл бұрын

I dont know maybe you can check on Lowes, HMR new material, i think still difficult found that.

@stuffoflardohfortheloveof 4 жыл бұрын

It’s simply High Moisture Resistant mdf board.....nothing special really....can’t see why it needs to be hmr instead of normal mdf

@plywoodworking 4 жыл бұрын

I think very different MDF and HMR, mdf not durable from water and not solid like HMR, i try drowning on water 3x24 jam and on direct sun 3 x 24 still same shape. Have grade on HMR you can choice what you want. What about MDF😅 can durable like that?

@stuffoflardohfortheloveof 4 жыл бұрын

plywoodworking either you’ve missed the point or they’ve invented a table saw and fence that works in water 🙂

@plywoodworking 4 жыл бұрын

@@stuffoflardohfortheloveof you say same like MDF, just for info that different. i think durable more good. that your choice will be use this or not

@oliverdelica2289 4 жыл бұрын

What country are you in?

@plywoodworking 4 жыл бұрын

Indonesia

@embwee 4 жыл бұрын

"Use superglue...assemble...wear douchie watch in almost ever shot to appear classy"

@plywoodworking 4 жыл бұрын

Superglue is the best😁

@robertluster 4 жыл бұрын

what the HELL is "HMR" ??? ━ Google is fixated on "Hazardous Material Regulations"

@plywoodworking 4 жыл бұрын

this material from HELL hehehe, try search with HMR material you can find about HMR

@designer-garb572 4 жыл бұрын

it's High Moisture Resistance particle board, like regular MDF but with a moisture resistant resin impregnated during the manufacturing process, generally used in bathrooms or where their is a high moisture content.