Le choix du bois est à revoir, le travail est celui d'un amateur qui certes travaille bien mais une crosse d'arme c'est pas du tout ça,il y a tout un tas de normes à respecter,un professionnel met plusieurs mois pour réaliser une simple crosse d'arme à feu.

A DIY air rifle.

obrigado meu amigo

The wood I use is light, but durable. It has some flexibility so that it can't break easily. And it is also a hardwood.

Ganda idol❤

Himbabao/alukon.

I suspect that's a himbabao wood because of the greenish tinge. It's one of the best wood for rifle stocks because of the tight grain and makes a fine finish. Way better than langka.

san ka po sa cavite need ba dalin airgun or kaya na kahit wala basta may sukat pcp po

@@ericramilo1901 mas maganda po kung sa airgun nyo po mismo maisusukat.

salamat sa video sir okey din ba gamitin ang palochina para gawing kulata?

@@MNS_ZeroFiveTwo hindi po.

@@joshuelicasartscrafts1250 ano pong mga kahoy ang pwedeng gamitin, yung mga kahoy sa lumber pwede po ba yon sir

Perfect pa din po yung sukat nya Sir kung susukatin nyo po sya sa baril na ilalagay nyo and sa gusto nyo pong maging fitting nya pag hawak nyo na po. Mas comportable po kayo sa hawak doon sa gun stock na ginagawa nyo mas maganda po.

The wood I use is 2½" thick and 29" in lenght.

You can also search how to make a perfect measurement for you.

Opo Sir,

ginawa ko lang din po yon Sir.

mas prefer ko po kasi kung gagawa nasa akin yung rifle na ilalagay. Para maayos ko po yung fit.

Wala po Sir.

Kaya po Sir.

Naic, Cavite po ako.

​@@joshuelicasartscrafts1250 sir pwede po pagawa ng kulata may sukat at design po kami

@@madelresuello892 pwede po.

@@madelresuello892 pakicontact na lang po kami sa isang fb page namin. Pyrographix

Any bar top varnish po pwede..

Himbabao po

Cavite po Sir

Himbabao po.

3k po pag ganyan..

I only drew and cut the silhouette freehanded on an illustration board.

Himbabao po

Cavite po.

Not for sale po

Himbabao Sir.

Napaka GANDA

Can you translate it to english?

Kung sakin po lahat ng gamit Sir, pwede na po 2,500-3,500 depende po sa design.

Himbabao po, Sir

Sariling gawa po.

Yung assembly po ng airgun. Ginawa ko lang din po yon Sir.

3k po Sir

3,500 po Sir. Sa akin ang materials.

1¾" thick 23"-25" in lenght.

Location mo idol

@@reyjava4438 Cavite po.

@@joshuelicasartscrafts1250 magkano pagawa ng butt sir

@@reyjava4438 depende po sa ipapagawa nyo.

Sorry, I don't have a pdf file of the template, because I draw and cut it freehand.

@@joshuelicasartscrafts1250 por fabor

Varnish po Sir.

@@joshuelicasartscrafts1250 isang pahid Lang po bha sir

@@hunterngleyteph 3 coats po Sir. Sand smooth between coatings

Naic, Cavite po Sir

@@joshuelicasartscrafts1250 magkano po pagawa nimrod po unit ko convert na sya sa pcp

@@rommellolo2653 3k - 4k po singil ko Sir. Pero kailangan ko din po yung unit kapag nagawa po ng stock. Para mai-fit ko sya ng maayos.

@@joshuelicasartscrafts1250 sir bka po my bawas pa

@@rommellolo2653 pwede nyo po ako kontakin sa fb page na Hybrid Airguns Ph Sir.

Cavite Sir, Messenger "pyrographix"

Himbabao/alukon po Sir, 2" thick

@@joshuelicasartscrafts1250 nj

Not for sale. But I can make a new one for you.

I want to buy

Where you from

@@mdarshadalamalam547 if you are here in the philippines, I can make one for you.

3-5 days po. Pwede pa po tumagal depende sa finishing.

Idol baka pede Maka order

@user-ny6uz2kb2b saan po kayo? Baka malayo po kasi dito.

Himbabao po

@@joshuelicasartscrafts1250 pwd makabili ng kahoy niyan sir? Ano fb mo?

@@hersonmanuel8766 binibili ko lang din po yan sa mga store dito sa amin Sir.

@@joshuelicasartscrafts1250 ah ganon ba. Pabili sana kahit isa lang

Kaso Sir, kailangan po nasa akin yung ag nyo for fitting.

Kailangan po buo na yung baril na lalagyan ng stock. Para maganda po yung fit.

@@joshuelicasartscrafts1250 buo na po sir.

@@ajriano4352 saan po location nyo Sir?

@@joshuelicasartscrafts1250 mandaluyong sir.

@@joshuelicasartscrafts1250 sir Ung design is ( FX Crown MKII )

Pwede po. Depende po sa design Sir.

Ung nsa video po sir magkano po ganyan pang armscor po Sana slmat po

@@roderickmiguel4269 3500 po Sir. Fully finished na. Pero di po kasama ang trigger guard.

Pang 2k ser ok lng po ba

@@roderickmiguel4269 may design na po kayo?

Any bar top varnish po Sir.

Wala pong fb page tong channel eh, pero my fb page po ako for business, Pyrographix

3k po Sir.

Sa cavite po Sir.